Secondary Containment

Biggar, SK, CAN

Storage tanks for energy, mining, fleet, construction, waste-handling, and bulk-storage applications have to be built for safety as much as capacity. AGI Envirotank manufactures environmentally safe steel storage tanks from Saskatchewan, including shop-built and field-erected tank systems. We support enviro tanks, steel storage tanks, secondary containment, waste-management tanks, API tanks, ULC tanks, ASME pressure vessels, custom plate work, bins, silos, DSAW spiral welded pipe, pumps, sandblasting, and transportation-related tank needs. COR certification and a documented safety program support industrial procurement. For oilfield storage, waste handling, bulk fuel, and industrial containment, AGI Envirotank is valuable when tank design, fabrication, safety, and environmental protection need to be considered together.

Spruce Grove, AB, CAN

Alberta's B.E.S.T. Inc provides Protective Coatings, Protective Coatings-Pipe, Secondary Containment, Environmental Containment, Pond & Pit Lining services to oil and gas operators in Spruce Grove, AB and across Western Canada.

Edmonton, AB, Canada

Our coatings line serves oil and gas, infrastructure, and industrial sites. We also design spray rigs and fabrication solutions for secondary containment and tank protection. Dealers use our rigs across construction, marine, and agricultural applications.

Barrhead, AB, CAN

Barrhead Plastics provides Secondary Containment, Containment Vessels services to oil and gas operators in Barrhead, AB and across Western Canada.

Chauvin, AB, CAN

Lease sites change fast when tank volume, containment, or flare handling shifts mid-job. Benoit Rentals Ltd in Chauvin supplies oilfield and industrial rental equipment for projects across Alberta and Saskatchewan. Our tank rental fleet runs from 100 bbl through 1000 bbl. We also rent secondary containment and burner management systems for sites handling produced fluids, brine, or recycled water. Flare systems are part of the rental mix as well. We supply flarestacks, flare knockout drums, and test separators for temporary production support and controlled flow handling. Portable office trailers, washroom units, and washcars handle the site trailer side. Light towers and rig mats support access and ground cover. Generators and fuel storage keep the site powered.

Innisfail, AB, CAN

Our Innisfail shop fabricates pressure vessels and tanks. We also handle flare systems, heat exchangers, and heaters. Internal coatings and insulation stay in-house at our manufacturing facility. We fabricate flare knockout drums and double-wall tanks for oilfield production and processing.

Wimborne, AB, CAN

Secondary Containment systems for above ground storage tanks. Secondary Spill Containment includes geomembrane liner within the dike area. Based in Wimborne, AB.

Keswick, ON, Canada

Air emissions, waste permits, and site inspections can become a compliance problem when records or reporting fall behind. Bryco Environmental delivers environmental assessment and waste management consulting from Keswick for Ontario industrial and facility clients that need clear regulatory direction. We work on complex air emission inventories, air and waste permitting, regulatory interpretation, environmental compliance assessments, environmental training, and annual reporting. These services help a plant, industrial site, or commercial facility understand what must be measured, documented, and reported. Training can cover environmental regulations, site inspection preparation, carbon management, waste management, industry technical standards, fugitive dust, odour practices, and spills management. We keep the focus on practical compliance tasks that staff need to carry out. When a project needs extra technical depth, we coordinate with environmental professionals in noise, surface water management, ambient and source testing, health and safety, and ventilation. Our Ontario service model is built for facilities that need environmental compliance support across more than one discipline.

Slave Lake, AB, CAN

Bulldog Protective Coatings provides Protective Coatings, Secondary Containment, Liners-Plastic Sheet services to oil and gas operators in Slave Lake, AB and across Western Canada.

Oakville, ON, Canada

A spill plan has to match the liquids, storage points, and movement patterns on site. Can-Ross Environmental Services Ltd works from Oakville, Ontario with spill control, absorbents, and secondary containment products for facilities that store, handle, transport, recycle, or manufacture dangerous and hazardous materials. We identify spill risks before a release becomes an emergency. Our assessments look at where product can escape, how fast it can spread, and which containment or absorbent product fits the hazard. Our product work is built around practical response needs. Absorbents help control liquids at the source. Secondary containment helps keep tanks, drums, and transfer areas from spreading a release into drains, soil, or work areas. Canadian industrial, power, manufacturing, marine response, and hazardous material sites use our spill control planning when they need clear product choices and containment answers. Our Oakville team can discuss spill control assessments, absorbent selection, and secondary containment needs for a specific facility or transport risk.

Saskatoon, SK, Canada

Century Environmental Services offers Secondary Containment services from Saskatoon, SK.

Cold Lake, AB, CAN

Contain provides secondary containment, primary liner, and steel containment. We also specialize in geomembranes, erosion control and soil reinforcement. Based in Grande Prairie, Cold Lake, AB.

High Level, AB, CAN

Containment Solutions Tanks have more than 50 years of experience, hundreds-of-thousands of tank installations, a patented manufacturing process, and extensive knowledge in all things storage.

Neilburg, SK, CAN

manufacture both seamless-moulded and modular style polyethylene buildings and enclosures that are used in a wide variety of settings from wellhead and valve enclosures in the oil and gas industry to vehicle and livestock shelters. D & G shelters are for Based in Neilburg, SK.

Lacombe, AB, CAN

A molded part can fail a field job when the shape, resin, or repair method does not match the application. D & M Plastics Inc works from Lacombe on custom rotational moulding and plastic manufacturing for oil patch, industrial, municipal, institutional, and agricultural customers. Since 1988, we have produced specialized goods through rotational moulding. That capability is suited to tanks, trays, and other formed plastic items where a standard product is not the right answer. Our welding and fabrication work focuses on polyethylene and polypropylene products. Damaged PE and PP items can be repaired, and small tanks or specialized pieces can be fabricated when a molded selection does not cover the need. Oil patch and industrial customers come to us for practical plastic parts, repairs, and custom production. The strongest project fit is a defined rotational moulding, tank, tray, or plastic welding requirement that needs shop capability in Central Alberta.

Fort Saskatchewan, AB, CAN

We make it easy to build your own floating dock. With just a few clicks, you can have a cart of goods tailored to your chosen design. See why we are the best Based in Fort Saskatchewan, AB.

Red Deer, AB, CAN

Spills around machinery, refueling points, and wash areas can turn a routine job into an environmental cleanup. Enviro-Pads Containment Systems Inc designs and manufactures secondary containment and environmental containment pads from Red Deer, Alberta for oil, gas, mining, and other industrial sites. Our heavy-duty portable containment systems hold hazardous fluids, chemicals, and wash water before they reach soil or surface water. The pads are reusable and movable, so they can follow equipment as site conditions change. For pipeline, construction, and field-service jobs, our containment pads help manage fluid risk at the source. We focus on practical ground protection where mobile equipment, fueling, maintenance, and washing create exposure. Our Red Deer team builds containment around the jobsite need: portable setup, heavy-duty use, spill prevention, and lower reclamation exposure after the job is complete.

Calgary, AB, Canada

Spill response fails when absorbents and containment are not ready before liquid reaches drains, soil, or equipment lanes. EnviroGuard Ltd, operating as Spill Solutions Canada, develops and manufactures spill control and containment products from Calgary for environmental spill response planning. Founded in 1993, we focus on absorbents and secondary containment for facilities, yards, field storage areas, and pipeline-related work where released fluids must be controlled quickly. Our product work is built around spill control, containment, and environmental spill management. We design and deliver complete spill response solutions rather than treating sorbent supply as a stand-alone purchase. That can mean matching absorbent products with containment planning for a plant, service yard, maintenance area, or field site. Our Calgary team handles spill control and secondary containment needs for Alberta industrial customers that need practical products, steady supply, and response planning tied to real site conditions.

Lethbridge, AB, CAN

Liquid handling equipment has to stand up to weather, handling, and repeated field use. From our Lethbridge manufacturing facility, Flexahopper Plastics Ltd. builds rotomolded secondary containment, containment vessels, and tanks for Canadian industrial and liquid handling applications. We are a 100% Canadian owned rotational molding plastics manufacturer founded in 1967. Our shop produces plastic products for farming, waste handling, food handling, and custom liquid handling needs where molded plastic gives the asset a clean, durable shape. Secondary containment and tank projects often need a product that fits the site instead of forcing the site to fit the product. Our custom rotomolded solutions help with storage, transfer, and spill-control planning around liquids and materials. Our Lethbridge team can discuss containment vessels, tanks, and custom molded plastic parts for industrial or field-service use across Canada.

Red Deer, AB, Canada

Rust, old coating, and surface contamination can shorten the life of steel before a coating system ever goes on. H & A Industrial Painting Ltd handles abrasive blasting and coatings in Red Deer for pipelines, plant equipment, steel structures, bridges, tanks, and vessel exteriors. Our sandblasting work prepares surfaces for coating by removing paint, rust, and existing finish from pipe, equipment, and structural steel. We can complete blasting in the field or in shop when project access and handling needs call for it. External coatings and painting are built around the asset. We coat above-ground pipe, spools, plant steel, concrete surfaces, and equipment where coating performance depends on surface profile and clean preparation. Red Deer sites use our blasting and coating services for maintenance, construction, and repair scopes where finish quality affects corrosion control and service life.

Blackfalds, AB, CAN

About – Hall Industrial Contracting Ltd. 📞(403) 885-8885 ✉Contact Us Home About Safety Services Gallery Contact Home About Safety Services Gallery Contact © 2026 Hall Industrial Contracting Ltd. About Since 2002 Hall Blasting & Coating started in 2002. Based in Red Deer, Blackfalds, AB.

Airdrie, AB, Canada

Oilfield storage areas need containment that can handle spills, weather, and sensitive ground conditions. Halo Environmental Ltd works from the Airdrie area on Secondary Containment systems for oilfield and commercial storage applications. We build around the containment problem first. Tank farms, pond linings, sumps, and trenches need primary or secondary containment systems that match the stored material and the site layout. Specialty coatings and spray linings add another layer of asset protection where tanks, storage areas, or containment surfaces face wear. Spray foam insulation is also part of our supported service scope for oilfield and commercial applications. Our team plans environmental containment around the asset, the exposure risk, and the surface being protected. Halo Environmental Ltd handles containment and coating work for oilfield storage sites where spill control and asset integrity are part of the same job.

London, ON, Canada

Hassco Industries, a leading steel tank manufacturer of Storage Tanks, Farm Tanks, Fuel Tanks, Steel Tanks, above ground storage tanks, and double wall tanks.

Bishops Falls, NL, Canada

Hydrocarbon spills call for absorbents and containment that can be staged before response time is lost. From Bishops Falls, Newfoundland, Hi-Point Industries manufactures Oclansorb oil absorbent and secondary containment products for oil spill response. We formed in 1983 to produce environmentally safe, all-natural oil absorbents for hydrocarbon spill containment. Oclansorb absorbs hydrocarbons on contact, giving field and facility teams a product built for oil spill control. Our manufacturing line includes oil containment boom and turbidity curtain for water and shoreline response. Spill kits, drip trays, and containment berms handle smaller releases around tanks, equipment storage, and maintenance areas. Custom products are available when standard spill response gear does not match the jobsite layout. We build oil response and containment products from Newfoundland for customers planning environmental protection around hydrocarbons, storage areas, and industrial equipment.

Edmonton, AB, CAN

Learn more about how John Crane can keep your mission-critical operations running efficiently by maximizing the reliability of your rotating equipment with engineered products innovative technologies and expert services. Based in Edmonton, AB.

Edmonton, AB, CAN

Drilling fluid on the rig floor creates slip risk, waste, and cleanup cost. From Edmonton, Katch Kan Ltd builds secondary containment, environmental containment, and safety equipment for oil and gas wellsite work. Our Zero Spill System is built to capture drilling fluids before they spread across the site. That keeps fluid control close to the source and reduces the mess tied to drilling and well servicing. Rig floor traction is handled through the Katch Mat System, a modular mat system designed for safety, ergonomics, and fluid redirection. We also engineer site-specific containment answers when a standard setup does not match the job. Product families such as Kelly Kan, Splash Guard, Upper Katch Kan, Kan Vac Gen II, Kan Van Gen II, and Adjustable Containment Enclosure give us options for different rig conditions. We have also manufactured large offshore Katch Mat systems for offshore service. Our Edmonton team plans containment and rig safety equipment around the wellsite layout, fluid path, and the level of spill control needed for the operation.

Drayton Valley, AB, CAN

Last Chance Trucking (1995) Ltd provides Cranes-Truck Mounted, Secondary Containment services to oil and gas operators in Drayton Valley, AB and across Western Canada.

Edmonton, AB, CAN

Layfield Geosynthetics & Industrial Fabrics Ltd provides Secondary Containment, Environmental Containment, Liners-Plastic Sheet, Pond & Pit Lining, Geotextiles-Support Fabric, Erosion-Control services to oil and gas operators in Edmonton, AB and across Western Canada.

Drayton Valley, AB, Canada

Give Us a Call High-quality Oilfield Supplies and Fire Safety Equipment in Drayton Valley Complete Supplies & Fire Safe Services has been in business in Drayton Valley for 10 years. We are a storefront/warehouse-style oilfield supply store specializing in fire extinguisher sales, belts, bearings, sheaves and more. We also offer a wide variety of the most up-to-date, high-quality welding tools and supplies on the market.

Spruce Grove, AB, CAN

Protective coatings specialist offering industrial painting, sandblasting, and corrosion prevention services for oilfield equipment and infrastructure.

Grande Prairie, AB, CAN

Industrial sites often need tanks that can handle storage, movement, and liquid compatibility without the weight of steel. Marmit Plastics Inc manufactures rotationally moulded plastic tanks in Grande Prairie, Alberta for storage and transportation use. We make plastic water tanks, chemical tanks, and agricultural tanks for customers who need practical containment options. For facility and industrial use, plastic tanks can help with corrosion concerns and day-to-day handling. Our Plastic-Manufacturing work is based on rotational moulding. The process is suited to tanks that need a consistent shape, enclosed storage, and field-ready handling. Marmit Plastics works from catalogue tank options and quoted orders. Our Grande Prairie shop keeps the focus on tank type, liquid use, and the storage or transport job the tank must handle.

Sturgeon County, AB, CAN

Containment construction has to match the liner system to the site before installation begins. Milepost Manufacturing Ltd. handles Secondary Containment and Liners-Plastic Sheet service from Sturgeon County for Western Canada and North American project needs. We have spent more than thirty years in secondary containment. That field history guides project-specific layouts where access, liquid control, and site specifications change from one location to the next. Our broader manufacturing capability includes steel fabrication and precast production when a construction scope needs more than liner placement. Each containment plan is built around the specification, not a generic layout. Oilfield and industrial locations can use our Sturgeon County team for secondary containment systems tied to spill control, storage areas, and construction requirements.

Oyen, AB, CAN

Millenium Oilfield Services Ltd provides Secondary Containment, Contractors-General Oilfield services to oil and gas operators in Oyen, AB and across Western Canada.

Edmonton, AB, CAN

Norseman Inc provides Tarpaulins services to oil and gas operators in Edmonton, AB and across Western Canada.

Toronto, ON, Canada

At O'Connor Tanks Ltd, we manufacture industrial, specialty, and transportation tanks from Toronto for chemical processing, municipal water treatment, and pulp and paper sites across Canada and the United States. Our polyethylene tank line includes closed-top tanks, containment basins, and double-wall storage tanks. Rotational molding keeps those products consistent across different capacities. Material handling containers come through the same production line when a facility needs storage and transport pieces built to match the tank order. Since 1976, our shop has stayed focused on molded storage products that can be specified for demanding industrial use.

Dawson Creek, BC, CAN

High-volume frac work and long-distance pumping need more than water on location. P.C. Oilfield Construction Supplies works from Dawson Creek with oilfield construction, water pumping, and fluid management across Northern British Columbia and Alberta. We handle field construction with labour, skid steer support, mini excavator work, and material supply for oil and gas projects. That keeps small equipment, site materials, and field tasks connected during lease, road, pad, and pipeline-related work. Water and fluid services are a core part of our project history. We have worked on high-volume frac operations, long-distance pumping, onsite fluid management, flowback management, and fluid handling from pipelines and trucks. Our Dawson Creek fabrication shop builds custom products for field needs when standard supply does not match the job. We also supply practical construction materials such as concrete products, culverts, fencing, matting, fittings, geotextiles, and secondary containment when they fit the same oilfield construction scope. Project planning can start with the field problem, the water movement requirement, or the construction supply gap. Our Dawson Creek team connects oilfield construction and fluid-management capability for sites across Northern BC and Alberta.

Mayerthorpe, AB, CAN

Pipeline construction and oilfield storage jobs need plastic products that can handle water, chemicals, and containment needs without slowing the site plan. In Mayerthorpe, Paddle Plastics Ltd manufactures rotational moulded tanks, storage, and secondary containment products for oil and gas, environmental, agricultural, and forestry use. We have built plastic products since 2003 as a family owned and operated shop. Rotational molding lets us produce formed tanks and containment items for field use, dealer supply, and industrial storage needs. Our product focus includes pipeline construction, chemical storage and containment, and water storage. Those product families fit wellsite support, laydown areas, and environmental control where a molded plastic tank or containment item solves a defined handling problem. We serve Alberta and wider Canadian markets, with source material also noting worldwide supply. Product conversations can stay focused on the tank size, containment use, or pipeline construction application that needs a molded plastic solution.

Lloydminster, AB, CAN

Prodahl Environmental Services Ltd provides Secondary Containment services to oil and gas operators in Lloydminster, AB and across Western Canada.

Nanaimo, BC, Canada

More Spill Response Our spill kits come in a variety of sizes and uses. From marine to first response, we have the right kit for the job. More Water Treatment Our water treatment units are built tough and come with a proven track record for reliability and functionality.

Airdrie, AB, CAN

Containment problems often start with an unusual surface, shape, or site condition. From Airdrie, Rocky Mountain Containment handles secondary containment and poly spray services for oil and gas, industrial, municipal, and commercial applications. We apply protective coatings and urethane-based spray systems where environmental containment needs a durable barrier. The same field approach fits challenging containment projects where standard materials do not match the asset or ground condition. More than 15 years of containment experience shape how we plan odd and unusual applications. That can include foam insulation for shops, sea cans, agricultural buildings, under-slab areas, and pipeline pillows when insulation or protection has to match a specific field use. Our environmental containment team works through surface prep, coating choice, and application conditions before the spray system is installed. That keeps the job tied to the site, the material, and the reason the containment barrier is needed.