120 listings
National 14-P-220 triplex mud pump, 2,200 HP, 7,500 PSI max WP. Fluid end liners and pistons recently replaced. Skid-mounted with pulsation dampener.
$680,000 CAD
Grande Prairie, ABVarco BJ TDS-11SA top drive, 1,000 HP, 500 ton capacity. Single AC motor with PH-85 swivel. Includes dedicated VFD, link tilt, and torque arrest system.
$875,000 CAD
Edmonton, ABCanrig 1275AC top drive, 1,275 HP, 650 ton hook load capacity. Dual AC motor. Full service history available. Ready to install.
$920,000 CAD
Red Deer, ABGardner Denver PZ-11 triplex pump, 1,100 HP, 7,500 PSI. Includes pulsation dampener, suction stabilizer. Recently serviced, new fluid end.
$295,000 CAD
Lloydminster, SKContinental Emsco C-3 duplex pump, 1,000 HP, 4,000 PSI. Complete with all hydraulics. Good running condition, available for immediate sale.
$175,000 CAD
Nisku, ABNational 1625-DE drawworks, 2,000 HP, twin Caterpillar diesels. Air-clutch operated, complete with auxiliary brake. Overhauled 2022.
$540,000 CAD
Whitecourt, ABHutchison-Hayes H-20 linear motion shale shaker, four-deck configuration. Stainless composite screens included. Recently refurbished.
$88,000 CAD
Fort St. John, BCDerrick FLC 2000 shale shaker. Four-panel screen configuration with replacement API 60, 100, and 200 mesh screens. Field-ready condition.
$72,000 CAD
Grande Prairie, ABCameron Type U annular blowout preventer, 13⅝" bore, 5,000 PSI WP. Hydraulic actuated, pressure-tested and recertified. Current inspection docs.
$92,000 CAD
Nisku, ABShaffer Type 79 annular BOP, 18¾" bore, 10,000 PSI WP. Complete with accumulator and control panel. Third-party pressure test report available.
$215,000 CAD
Calgary, ABHydralign 27½" opening rotary table rated to 1,200,000 lb. load capacity. Complete with drive and locking mechanism.
$148,000 CAD
Drayton Valley, ABWilson Industries 3,000 HP land drilling rig. Includes drawworks, top drive, mast (142 ft), substructure, all ironwork. Complete BOP stack. Mobilizable.
$3,800,000 CAD
Peace River, ABComplete fishing tool package: overshots, spears, junk mills, watermelon mills, junk baskets, impression blocks. Multiple string sizes. Excellent condition.
$38,000 CAD
Edmonton, ABBrandt VSM 300 shale shaker, 4-panel API configuration. Dual motor vibration. Stainless steel deck. Low hours, excellent condition.
$65,000 CAD
Slave Lake, ABNational 1320 drawworks, 3,000 HP. Cathead, spool, Airflex clutches. Includes crown saver system. Overhauled 2021, ready for yard pickup.
$425,000 CAD
Fort McMurray, AB
Halliburton HT-400 quintuplex frac pump, 400 HP, 15,000 PSI WP. Mounted on Caterpillar C13 power unit. Recent service history available.
$285,000 CAD
Red Deer, ABMission Magnum centrifugal pump, 6×5×14 configuration. Includes 100 HP electric motor and base plate. Excellent condition, low hours.
$27,500 CAD
Nisku, ABGardner Denver 7-P-50 triplex plunger pump, 50 HP, 3,000 PSI. Belt-drive configuration. Good serviceable condition.
$18,500 CAD
Calgary, AB30× Cameron 4-1/16" 5,000 PSI gate valves. FLS and FLL end connections. Various conditions, lot sale only. Current bore and seat charts.
$42,000 CAD
Edmonton, ABSundyne LMC-311 high-speed centrifugal pump, API 610 compliant. 200 HP electric motor, 3,600 RPM gearbox. Excellent condition, minimal hours.
$58,000 CAD
Fort Saskatchewan, ABKerr K-1600 triplex plunger pump, 1,600 PSI, 70 GPM. Skid-mounted with prime mover. Complete with all hoses and fittings. Recent inspection.
$145,000 CAD
Grande Prairie, ABNational 7-P-50 triplex cement pump unit. Includes Caterpillar C9 power unit, skid, manifold. Used for well cementing. Serviced 2023.
$95,000 CAD
Lloydminster, SKFMC Bean Model 20T triplex reciprocating pump, 25 HP, 500 PSI. Includes electric motor drive. Good working condition.
$12,500 CAD
Drayton Valley, ABBulk lot of 200 API gate valves, mixed 2" and 3", 3,000 PSI WP. Flanged and threaded ends. Surplus yard inventory — inspection welcome.
$28,000 CAD
Nisku, ABWeir SPM TW-800 quintuplex positive displacement pump, 800 HP, 15,000 PSI. Caterpillar C32 prime mover. Excellent condition, well maintained.
$420,000 CAD
Red Deer, AB
Vertical 3-phase production separator, 48" × 120", 500 PSI ASME. Includes mist extractor, vortex breaker, instrumentation. Certified, current CRN.
$145,000 CAD
Provost, ABNatco electrostatic heater-treater, 500 BBL/day. 60" × 20 ft horizontal vessel, 150 PSI WP. Includes burner, controls, and transformer. Good condition.
$225,000 CAD
Lloydminster, SKEmerson 4" orifice meter run with Daniel junior fittings. Differential pressure transmitter, flow computer, and printer. ERCB compliant. Calibrated 2023.
$48,000 CAD
Edmonton, ABEnclosed ground flare with 6" knockout drum. Stainless steel burner tips, automatic ignition, flame arrester. Current CRN certification.
$38,000 CAD
Wainwright, ABTri-ethylene glycol dehydration skid, 3 MMSCFD capacity. Contactor, reboiler, still column, flash tank, pump — all included. Low hours, excellent condition.
$185,000 CAD
Grande Prairie, ABComplete well test package: 3-phase separator, transfer pump, test manifold, instrumentation. Containerized, road-ready. Available immediately.
$115,000 CAD
Estevan, SKHorizontal gas scrubber, 36" × 96", 1,440 PSI ASME. Inlet diverter, mist pad, auto drain. CRN registered. Surplus from decommissioned plant.
$68,000 CAD
Calgary, ABLufkin C-912-365-168 conventional pumping unit. 37,900 lb peak load, 168" stroke. 100 HP motor, grade beam. Good mechanical condition.
$62,000 CAD
Kindersley, SKPason EDR surface data acquisition system. Weight-on-bit, torque, ROP, pit volume sensors. Complete installation package. Low use, near-new condition.
$28,000 CAD
Calgary, AB1" Grade D sucker rods, 5,000 m inventory. Mixed 25 ft and 30 ft lengths. Good usable condition. Includes couplings. Surplus from field decommission.
$55,000 CAD
Kindersley, SK
Cat G3516C natural gas engine compressor package, 1,400 HP. Ariel JGT/4 compressor frame, 1,200 PSI suction/discharge. CAN/CSA certified. Full service history.
$485,000 CAD
Slave Lake, ABAriel JGK/4 four-throw reciprocating compressor, 800 HP. Includes Waukesha L5790 gas engine, suction/discharge scrubbers, after-cooler. Low hours.
$310,000 CAD
Grande Prairie, ABAjax DPC-600 integral engine compressor, 600 HP. Slow-speed design, two-throw. Good mechanical condition, suitable for gas gathering applications.
$195,000 CAD
Lloydminster, SKCat 3516C genset, 2,000 kW prime power, 600V/60Hz. Includes Cat Switchgear, load management. Low hours — 4,200 hours on meter. Containerized enclosure.
$780,000 CAD
Fort McMurray, ABCummins QSK60-G13 generator set, 1,500 kW, 480V/60Hz, 12-lead. Deep sea DSE7320 control panel. Under 6,000 hours. Good operating condition.
$420,000 CAD
Edmonton, ABWaukesha 7042GL lean-burn gas engine, 1,050 HP at 1,200 RPM. Includes Altronic ignition, full controls, and heat exchanger. Recently overhauled.
$265,000 CAD
Red Deer, ABCat 3412C generator set, 800 kW, 600V, 60Hz. Weather-protective enclosure, load bank tested. All maintenance records available.
$195,000 CAD
Nisku, ABKirloskar 6,000 kW industrial gas generator. Complete power plant package including transformers and switchgear. 8,400 hours, fully operational.
$2,200,000 CAD
Fort Saskatchewan, ABAggreko 500 kW diesel genset, rental return. Perkins engine, 600V, 60Hz. Containerized. Includes all cabling and distribution panels. Low hours.
$185,000 CAD
Calgary, ABSullair 1600H rotary screw air compressor, 1,600 CFM, 350 PSI. Caterpillar C15 diesel engine. Trailer-mounted. Serviceable condition, recent service.
$68,000 CAD
Peace River, AB
Liebherr LTM 1130-5.1 all-terrain crane, 130-tonne capacity, 66 m main boom. Full set of fly jibs and counterweights. 12,800 hours, excellent condition.
$1,250,000 CAD
Nisku, ABGrove GMK5250L 250-tonne all-terrain crane, 68 m main boom, 36 m fixed jib. 9,400 hours. Full documentation, current ABSA certification.
$2,800,000 CAD
Edmonton, ABCat 374FL large excavator, 80-tonne class. 9,800 hours, Pin-on bucket arrangement. Cat Grade 3D ready. Excellent undercarriage, serviced regularly.
$510,000 CAD
Fort McMurray, ABCat D8T crawler dozer, LGP configuration. 285 HP, semi-U blade, ROPS/FOPS cab. 7,200 hours. Well-maintained, full Cat dealer service history.
$420,000 CAD
Grande Prairie, ABManitowoc 2250 crawler crane, 275-tonne capacity. 91 m heavy-lift boom configuration. Complete counterweight set. Recently refurbished. Full certification package.
$2,400,000 CAD
Calgary, ABCat 745C articulated dump truck, 45-tonne payload. 7,100 hours, diff-lock, payload monitor. Good undercarriage. Service history with dealer records.
$495,000 CAD
Fort McMurray, ABJLG 1850SJ telescopic boom lift, 56 m working height, 340 kg platform capacity. 1,800 hours. Meets current CSA safety standards. Inspection available.
$145,000 CAD
Edmonton, ABLiebherr LR 1300 lattice boom crawler crane, 300-tonne capacity. 84 m main boom. 6,100 hours. Complete with full counterweight and jib sets.
$3,200,000 CAD
Fort Saskatchewan, ABCat 336FL excavator, 36-tonne class. 6,400 hours. Grade guidance package, Topcon GPS. Good condition, recent undercarriage inspection.
$295,000 CAD
Lloydminster, SKAtlas Copco ROC L8-15 surface drill rig, 6.5 m hole depth capacity, 127–165 mm bit size range. Caterpillar C9 engine, 280 HP. Low hours, near-new condition.
$685,000 CAD
Peace River, ABTerex RT 100US rough terrain crane, 90-tonne capacity, 51.8 m main boom. 5,200 hours. Good working condition, current certification.
$480,000 CAD
Red Deer, ABCat 140M3 motor grader, 174 HP, 4.3 m moldboard. 3,800 hours, autoshift transmission. All-wheel drive, ripper attachment. Excellent condition.
$345,000 CAD
Medicine Hat, AB
2019 Kenworth T800 tri-drive with Tulsa winch 100,000 lb capacity. Cat C15 500 HP, 18-speed Eaton-Fuller. Low mileage, Saskatchewan certified.
$285,000 CAD
Nisku, AB2020 Western Star 4900SA with custom service body, crane, compressor, and hydraulic system. Detroit DD15 600 HP. 185,000 km. Excellent condition.
$198,000 CAD
Grande Prairie, AB2018 Peterbilt 367 tri-drive, Cummins X15 550 HP, 18-speed manual. Air-ride suspension, 52" mid-roof sleeper. 420,000 km, well maintained.
$182,000 CAD
Calgary, AB2017 International HX615 with 24 ft steel flat deck. Cummins ISX 450 HP, auto transmission. 310,000 km. Good condition, current safety.
$145,000 CAD
Fort McMurray, ABLandoll 440 hydraulic detachable lowboy, 75-tonne capacity, 48 ft well. Air-ride suspension, multi-axle. CVSE permitted. Excellent condition.
$145,000 CAD
Nisku, ABKenworth T880 with 18 cu yd steel end dump body. Paccar MX-13 485 HP, auto. 390,000 km. Oil sands spec, heated body, good rubber.
$168,000 CAD
Fort McMurray, AB2021 Ford F-750 with Fassi F165A.2 6-tonne knuckle boom crane. 6.7L Power Stroke diesel. 65,000 km. Custom aluminum body, toolboxes, generator.
$128,000 CAD
Edmonton, ABKenworth T800 vacuum truck, 5,000 USG tanker, 27 HP National Vacuum pump. Hydrovac capable. Cat C15 475 HP. 290,000 km. TSSA certified.
$310,000 CAD
Lloydminster, SKPeterbilt 389 hot oil unit, 500 USG insulated tank, Caterpillar C15 diesel burner. Dual fuel, high-pressure pump. 255,000 km. Good working order.
$148,000 CAD
Kindersley, SKTrail King TK70HT hydraulic detachable gooseneck, 70 T capacity. 53 ft main deck, air ride, 10-position suspension. Near-new condition.
$138,000 CAD
Red Deer, AB2019 Western Star 4800 with 5,000 USG aluminum water tank. Tri-drive, Detroit DD15 500 HP. Centrifugal and positive displacement pumps. 195,000 km.
$188,000 CAD
Peace River, AB2016 Ford F-550 XLT 4×4 with aluminum service body, 750 lb Stellar crane, air compressor, toolboxes. 6.7L diesel, 148,000 km. Clean truck.
$68,000 CAD
Edmonton, ABFreightliner Cascadia fuel truck, 7,000 L stainless tanker, Gasboy meter. Detroit DD15 500 HP. 4-compartment, full metering. 285,000 km.
$215,000 CAD
Grande Prairie, AB
400 BBL vertical production tank, 8 ft Ø × 27 ft HT. API 650 fabrication, 125 PSI rated. Includes thief hatch, swing check. CRN certified. Good condition.
$28,500 CAD
Provost, AB500 BBL steel frac tank, rectangular, ASME 400 PSI rated. Full-length heating coil. Rear-mounted pump-out valve. Recent pressure test documentation.
$42,000 CAD
Red Deer, AB10× 400 BBL open-top steel production tanks. 7 ft Ø × 36 ft HT. API 650, secondary containment welds. Good condition — field pickups available.
$215,000 CAD
Wainwright, AB1,000 BBL insulated and heated atmospheric storage tank. ERCB approved design, 50 PSI internal. Steam coil heating, foam insulation. CRN registered.
$78,000 CAD
Lloydminster, SKDouble-wall HDPE frac tank, 500 BBL. UV resistant, corrosion immune. Forklift pockets, bulkhead fittings, full level gauge. Nearly new condition.
$35,000 CAD
Edmonton, AB10,000 L double-wall diesel fuel skid with 5 kW generator, pump, and metering. TSSA approved, forklift pockets. Road-ready, current inspection.
$48,000 CAD
Fort McMurray, ABHorizontal pressure vessel, 36" OD × 120" L, 1,440 PSI ASME. Carbon steel, NACE MR-0175 compliant. Inlet diverter, mist eliminator. CRN registered.
$58,000 CAD
Calgary, AB200 BBL ASME horizontal wash tank, 150 PSI WP. Includes level gauge, pressure gauge, 4" inlet/outlet flanges. Current CRN, pressure test docs available.
$38,000 CAD
Drayton Valley, AB
4½" J-55 BTC production casing, 15.1 lb/ft, R-3 range. 1,000 joints, all measured. Less than 10% reject rate expected. Inspection available on-site.
$185,000 CAD
Nisku, AB7" L-80 BTC casing, 29.0 lb/ft, R-3 range. 500 joints; 480 joints inspected, 95% grade 1. Current API inspection report available.
$265,000 CAD
Edmonton, AB2⅞" J-55 EUE tubing, 6.4 lb/ft, R-2/R-3 mix. 2,000 joints. Recent API CUE inspection, lot report available. Good serviceable condition.
$148,000 CAD
Lloydminster, SK5" 19.5 lb/ft S-135 premium drill pipe, Range 3, NC50 (IF) connections. 5,000 m (approx. 600 joints). DS-1 Category 3 inspection, grade 2 average.
$420,000 CAD
Grande Prairie, AB6⅝" S-135 heavy-weight drill pipe, 200 joints, 30 ft R-3. FH connections. Good serviceable condition. DS-1 Category 3 inspection available.
$155,000 CAD
Drayton Valley, AB9⅝" L-80 BTC surface casing, 47.0 lb/ft, R-3. 300 joints in inventory. Current API inspection. Ready for immediate release from yard.
$225,000 CAD
Red Deer, AB
50× MSA Altair 5X multigas detectors. H₂S, CO, O₂, LEL sensors. Fresh calibration, current certificates. Charging station and cases included.
$38,000 CAD
Calgary, ABXSpect 8-point fixed H₂S monitoring system. Main controller, 8 electrochemical sensors, audible and visual alarms. CSA certified. Operational and tested.
$14,500 CAD
Fort McMurray, ABASME B30.23 compliant personnel basket, 6-man capacity, 1,500 lb SWL. Includes secondary line, tagline rings, fall arrest anchors. Current inspection.
$28,000 CAD
Nisku, AB20× Scott AV-3000 SCBA units with cylinders, plus 10× DrägerSensor transmitters and 4× emergency eyewash stations. Annual inspection current.
$18,000 CAD
Edmonton, ABFully enclosed personnel transfer basket, 4-man capacity, 2,000 lb SWL. Stainless netting, internal handrails. DNV GL certified. Inspection docs available.
$22,000 CAD
Calgary, AB4-zone CO₂ fire and gas suppression skid. Includes detectors, control panel, CO₂ cylinders, manual pull stations. NFPA 12 compliant. Ready to ship.
$45,000 CAD
Fort Saskatchewan, AB
4" Daniel Senior fitting, flange-tapped, 150 ANSI. DP transmitter, pressure transmitter, temperature element. Calibration current. ERCB approved design.
$52,000 CAD
Edmonton, ABABB WaterMaster 6" electromagnetic flow meter, 4–20 mA output. Low conductivity capable. Includes signal converter. Recent factory calibration.
$18,000 CAD
Calgary, ABISCO 6712 portable peristaltic pump sampler with 24-bottle refrigerated base unit. Flow-proportional programming, Teflon tubing. Calibrated.
$8,500 CAD
Drayton Valley, ABCalscan X-MET8000 handheld XRF analyzer for soil and alloy analysis. Full element suite, GPS logging, 8,000-point database. Calibration certificates.
$35,000 CAD
Fort McMurray, AB5× Cameron Nuflo MC-II multi-channel flow computers. Configured for gas volume measurement. Includes pressure/temperature sensors and enclosures. Calibrated.
$24,000 CAD
Grande Prairie, ABGE PT878 clamp-on ultrasonic flow meter kit. Works on pipes 25 mm–600 mm. Includes transducers, carrying case, calibration docs. Excellent condition.
$22,000 CAD
Lloydminster, SKHoneywell Enraf 854 servo gauge system for 400 BBL tank. Includes transmitter, control unit, cable, and installation hardware. Factory calibrated.
$32,000 CAD
Edmonton, AB10× Fisher Controls FIELDVUE DVC6200 digital valve controllers. HART compatible. Various sizes 1"–4". Full documentation and calibration kits included.
$28,000 CAD
Calgary, ABCJES VFD-AC 3,000 HP drilling rig. 180 ft mast, 1,500-ton substructure. Full 18¾" 15,000 PSI BOP stack. All ironwork included. Available for inspection.
$4,800,000 CAD
Whitecourt, ABPEMCO NGL extraction plant. Molecular sieve dehydration, refrigeration, deethanizer. 5 MMSCFD inlet capacity. All vessels CRN registered. Mothballed 2023.
$1,850,000 CAD
Leduc, ABSolar Centaur 50 gas turbine driver, 5,700 HP, with Solar Compressor centrifugal stage. 1,000 PSI discharge, 22 MMSCFD. Overhauled 2020. Inspection available.
$1,250,000 CAD
Fort Saskatchewan, ABTadano ATF 220G-5, 220-tonne capacity, 70 m boom, IC-1 Plus control. 8,200 hours. Complete jib and counterweight sets. ABSA registered and certified.
$2,350,000 CAD
Calgary, ABKenworth T880 with Oshkosh S-Series 10 m³ cement mixer. Paccar MX-13 500 HP, Allison 4500 auto. 145,000 km. Clean truck, current annual safety.
$245,000 CAD
Red Deer, ABIndirect-fired line heater, 750 PSI ASME, 4 MMSCFD capacity. Propane burner, 300,000 BTU/hr. Skid-mounted, automated controls, shut-off safety system.
$78,000 CAD
Slave Lake, ABTrident HT-800 electric quintuplex pump, 800 HP, 15,000 PSI. VFD-controlled, low maintenance. Only 1,800 hours. Sold by service company upgrading fleet.
$580,000 CAD
Red Deer, ABNOV ST-80 top drive system, 1,350 HP, 750-tonne hook load. AC motor, IBOP integrated. Low hours, includes controls and mounting hardware.
$1,050,000 CAD
Edmonton, ABScott ProAir III triple-cylinder air compressor, 6,000 PSI, CSA certified. Includes 20× 45-min SCBA cylinders and fill station. Annual service current.
$32,000 CAD
Calgary, ABFluke 1760 three-phase power quality recorder. Measures harmonics, sags, swells, EN50160. 1,000V CAT III. With current clamps and reporting software.
$14,500 CAD
Edmonton, ABSurefire direct-fired oil treater, 1,500 BBL/day. 60" × 240" horizontal vessel, 150 PSI ASME. Includes burner management system and level controls. CRN current.
$195,000 CAD
Lloydminster, SKCat C175-20 generator set, 4,600 kW, 13.8 kV, 60 Hz. Includes weather-proof enclosure, radiator, and Emerson power management. Under 5,000 hours. Excellent condition.
$3,800,000 CAD
Fort McMurray, ABCat 988K wheel loader, 36-tonne operating weight. 8,400 hours. General purpose bucket, quick coupler. Dealer maintained, payload scale system installed.
$485,000 CAD
Fort McMurray, AB2017 Ford F-250 XLT 4×4 crew cab, 6.7L Power Stroke diesel. 195,000 km. Tow package, spray-in liner, remote start. Clean title, detailed service record.
$52,000 CAD
Calgary, AB13⅜" K-55 BTC surface casing, 68.0 lb/ft, R-3. 150 joints, current API inspection. Good serviceable condition, ready for quick release.
$225,000 CAD
Peace River, ABRoad-mobile 3-phase test separator on tandem trailer. 1,000 PSI ASME, complete instrumentation, data logger, manifold. CRN current. Ready to deploy.
$98,000 CAD
Drayton Valley, ABBaker Hughes REDA electric submersible pump system. 400 HP motor, 540 series pump, 3,500 ft cable assembly. Includes surface controls and switchboard.
$145,000 CAD
Kindersley, SKM/D Totco electronic drillers console with surface readout. WOB, RPM, torque, ROP, SPM, pit level indicators. Interfaced to EDR. Full wiring kit included.
$42,000 CAD
Calgary, AB5× Baker Tank 500 BBL open-top portable frac tanks. Steel, 12 ft × 42 ft. Rear valve and clean-out. Rental return condition. Inspection available.
$95,000 CAD
Red Deer, ABPac-Set portable freestanding fall protection system. 5 m × 5 m work area, 2-person SWL. ANSI Z359.16 compliant. Includes 10× lanyards and 10× harnesses.
$22,000 CAD
Nisku, ABAtlas Copco XRVS 476 Cd trailer-mounted diesel rotary screw, 1,750 CFM, 350 PSI. Cat C13 engine. Only 1,900 hours. Used for nitrogen pump-down operations.
$185,000 CAD
Grande Prairie, ABCat 657G tandem-powered elevating scraper, 34-tonne struck capacity. Push-pull configured. 11,400 hours, recent undercarriage overhaul. Oil sands spec.
$625,000 CAD
Fort McMurray, AB