Contractors General Oilfield Companies

Rocky Mountain House, AB, CAN

Oilfield roads, forestry access, and civil earthmoving all depend on equipment that can keep the route usable. Prentice Creek Contracting Ltd works from Rocky Mountain House with oilfield, civil, and forestry services for earthmoving and road maintenance. The official source says we has provided those services since 1981, so the profile stays close to access, ground movement, and field continuity. Earthmoving is the base service. Sites may need ground prepared, material moved, drainage improved, or access opened before the next phase can happen. We support that kind of work by matching equipment and field knowledge to the job condition. The customer benefit is simple: a site that is easier to reach, safer to work around, and more predictable for the next crew or truck movement. Road maintenance supports the same operating need. Oilfield, forestry, and civil work can all stall when the road is rutted, blocked, or not maintained for the traffic using it. Keeping roads usable helps protect schedules and reduces avoidable wear on vehicles and equipment. Around Rocky Mountain House, that can be especially important when weather, season, and remote access all affect the job. Portable bridge installation gives Prentice Creek another practical access tool. A temporary bridge can help customers cross wet areas, creeks, or difficult ground without turning access into a larger construction problem. We treat portable bridges as part of the access plan, not as a side service. The bridge decision has to connect to the load, route, ground condition, and time the site needs to stay open. Snowplowing extends the access story into winter. Snow can turn a routine road or yard into a missed window when equipment and trucks cannot move safely. Snowplowing helps keep roads, leases, yards, and work areas open enough for field activity. That supports continuity when winter conditions would otherwise slow a job before it starts. The source also points to modern, well-maintained machines and knowledgeable staff. We keep that detail tied to the service because earthmoving, road maintenance, bridge installation, and snowplowing all depend on fleet readiness. From Rocky Mountain House, Prentice Creek Contracting gives customers a practical path for oilfield, civil, and forestry access work that needs equipment, timing, and field judgement in the same plan. Modern, maintained equipment is important because earthmoving and access work depends on machine readiness. A road maintenance job, bridge install, or snowplow route can fail before it starts if the fleet is not ready for the ground and weather conditions. Prentice Creek's equipment list and service pages support a profile built around field readiness rather than a vague construction label. Oilfield, civil, and forestry work also share one practical problem: access changes constantly. A lease road may need grading after weather. A forestry route may need maintenance before traffic increases. A civil site may need earth moved before a contractor can start the next phase. We treat those as connected field problems because the same equipment discipline helps keep the route or site usable. Since 1981, Prentice Creek has served customers that need ground, roads, and access managed around real field conditions. The next conversation should name the route, site, season, equipment need, and whether the job involves earthmoving, road maintenance, bridge installation, or snowplowing. That gives the customer a clearer path than a generic request for construction help. The first practical step is to define the access problem. A road may need maintenance, a site may need earthmoving, a crossing may need a portable bridge, or winter conditions may require snowplowing. Starting with the route, season, and field condition helps match the equipment plan to the job. That approach also helps when oilfield and forestry access overlap. The same road can serve several users, and one missed maintenance step can affect the next truck, machine, or field visit. We keep the service conversation tied to access continuity so the route stays usable for the people and equipment that depend on it.

Taber, AB, Canada

At Prime Rentals Ltd, we keep construction rentals ready in Taber for contractors who need lift, heat, pumping, and tool capacity close to the job. Our rental yard serves construction sites and industrial facility projects where weather, access, and timing shape the day. Heaters help keep cold-weather tasks moving, pumps handle water movement, and welding gear or tools fill gaps for repair and setup. Cooper Equipment Rentals backs the local branch with locations across Canada. From Taber, we help southern Alberta contractors match the machine class, attachment, and rental window to the site plan.

Nisku, AB, CAN

Priority Projects in Nisku builds oil and gas production equipment for field and facility jobs that need a package shaped around the site. We combine sales, rentals, and custom fabrication so the equipment can match pressure, flow, and footprint. We started as a rental company and grew into custom packaging while we kept building the rental fleet. That lets us cover temporary units, refurbished customer-owned equipment, and new packaged builds from the same shop. Our work also covers pressure vessels and hydro-testing. We add instrumentation and controls when the package needs them. We can build in valves or heaters as part of the same system. Customer-owned equipment can be refurbished by Priority Projects and stored for reasonable periods after purchase or repair. Our Nisku team keeps the shop work tied to the next installation or changeover.

Winnipeg, MB, Canada

Pritchard Engineering, proudly serving Winnipeg and beyond since 1923. Our customers represent a range of industries, both public and private, including agriculture, mining, aerospace, heath care, construction, manufacturing, retail and transportation. This range, as well as our expertise in five key divisions, enables us to provide complete, informed, expert solutions. Pritchard provides a breadth of industrial products and services, and is committed to providing the very best in manufacturing, sales, service and distribution.

Regina, SK, Canada

Regina oil and gas parts need welding and fabrication that hold up after the component returns to hard service. Pro-Metal Welding & Machine works from a 50,000-square-foot facility on shop-built components for pipeline and oilfield infrastructure. Our strength is the mix of shop disciplines under one roof. Welding and machining help bring components back to specification, while fabrication and coating support new or repaired parts before they return to the field. For a Pro-Metal request, the planning details are component type, drawing or tolerance, weld requirement, coating need, and whether the part belongs in pipeline or drilling service. We keep the shop path tied to the part that has to survive the job.

Edmonton, AB, Canada

Welcome to ProArc, Established in 1991, ProArc is India’s leading manufacturer of CNC Plasma and laser Cutting Machines serving 2000+ customers globally.

Fox Creek, AB, CAN

Oilfield maintenance around Fox Creek often needs welding and small construction without dragging the site into a long outage. ProFoxx Energy Services handles that work from Fox Creek, with facility construction and oilfield maintenance on the same team. We also build around welding and small construction when pipe-related repair or ducting work needs to happen on site. Large-diameter ducting fabrication and repair sit alongside that field repair when access, fit, and turnaround timing matter. Hydro-testing, road maintenance, and snow removal keep pressure work and winter access on track. Our Fox Creek team stays close to the operating area so maintenance, fabrication, and access work can move as one job.

Edmonton, AB, CAN

Construction employers can lose work before a project starts when bid rules, labour models, and procurement policy block fair competition. Progressive Contractors Association of Canada is a national construction association based in Edmonton, representing more than 140 contractors whose workers belong primarily to the CLAC union. We advocate for competitive construction markets across Canada. The policy role connects contractors, entrepreneurs, owners, and government discussions around procurement, labour rules, and the conditions that shape major construction work. PCA represents members across construction sectors, including mechanical, electrical, pipeline, bridge, civil, and utility-related contractors. That is association representation and advocacy, not direct field contracting. From Edmonton, our work connects national construction policy with Alberta and western Canadian concerns. The service value is a clearer voice for open competition and the progressive unionized model in Canadian construction.

Kamloops, BC, Canada

Process equipment that wears too fast can slow production. Progressive Polyurethane Products Inc. casts urethane and rubber wear parts in Kamloops for equipment that sees abrasion, impact, and repeated contact. We handle large pours for process equipment and custom parts in different sizes and material compounds. Our shop works with polyurethane, vulcanized rubber, and bonded rubber. We also build steel-backed pieces with embedded ceramics or tungsten carbide when the duty cycle calls for longer service. Pulley, roller, and wheel builds are common, along with scraper blades and spray urethane. We also make custom cast parts around the shape of the asset and the surface that takes the load. We have been casting urethane since 2000. Our Kamloops team matches the part to the wear pattern and pour size before production starts.

Edmonton, AB, CAN

Proline Pipe Equipment Inc. in Edmonton manufactures and distributes specialized pipeline construction gear for oil and gas, plant construction, and utility supply needs. We keep the focus on pipe handling, pipe bending, and the consumables that keep field fabrication moving. The product base starts with pipeline tools and fabrication supplies. Welding-related items sit beside slings, gauges, gloves, pumps, seals, and instruments when pipe yards and construction sites need orders assembled around the actual build sequence. Proline has served domestic and international pipeline customers from Alberta for more than 50 years. That history gives the Edmonton order desk context for pipe-yard timing, plant scope, and delivery planning.

Calgary, AB, Canada

Pipeline and processing sites need controls that can be tested, maintained, and brought back under power without wasted handoffs. Pronghorn Controls Ltd handles electrical and instrumentation work from Calgary across Western Canada and the US. We support oil and gas and pipeline sites. Petrochemical and industrial sites use the same field response when controls need attention. We combine instrumentation and electrical service when the control package spans more than one system. Field automation sits alongside thermal imaging and combustion service when heat, load, or burner condition has to be checked in the field. Since 1981, we have supported large industrial, agricultural, and mining sites. Oil and gas, pipeline, and petrochemical jobs fit the same service model when the controls scope needs a Calgary base and cross-border reach. When a site needs electrical fault-finding, instrumentation repair, or a planned automation upgrade, we keep the scope tied to the field conditions on site.

Dawson Creek, BC, Canada

Throughout the years, we’ve navigated the complexities of the sector, from remote locations to challenging environments, consistently delivering high-quality solutions. Our deep understanding of industry standards, safety protocols, and the evolving needs of our clients allows us to provide tailored services that optimize efficiency and minimize downtime. Whether it’s maintenance, repair, or emergency support, we can handle any challenge that comes our way with confidence and precision.

Grande Prairie, AB, CAN

Propipe Group Ltd provides Facilities-Installation, Fabricators, Contractors-General Oilfield services to oil and gas operators in Grande Prairie, AB and across Western Canada.

Okotoks, AB, Canada

Proud Canadian Welding Svc Ltd is best understood through the customer job behind welding around Okotoks, AB. The nearby scope includes fabrication. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make. Our welding scope starts with the condition of the asset. It can repair or modify metal when fit and access are tight. The fabrication side helps customers turn measurements and wear points into buildable parts. For customers in Okotoks, AB, that means fewer vague calls and a better start for quoting or planning. A narrow service label is rarely enough on its own. The stronger question is what has to be built, repaired, checked, moved, or kept online. We use welding as the anchor and bring in fabrication where it helps define the next step in Okotoks, AB. This kind of detail also reduces handoff risk. If the first call is about welding, the customer can still see when fabrication belongs in the same discussion. Okotoks, AB adds the local planning layer, especially when timing, access, or branch response affects the job. That keeps the request from bouncing between unrelated categories. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use welding as the anchor, then bring in fabrication where it helps clarify the next step. That keeps the path helpful without adding a loose series. Planning stays clearer when welding remains close to fabrication. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Okotoks, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use welding as the anchor, then bring in fabrication where it helps clarify the next step. That keeps the path helpful without adding a loose series. A good close should leave the customer with a practical next conversation. That starts with welding and may extend into fabrication. Listed as established in 2011, the operation also has a continuity signal for repeat local purchasing. Okotoks, AB gives the location context without copying a full address. The next move should be clear: ask about the service, the asset, the timing, or the quote path. The detail should also help a customer decide what to do next. A person can check whether welding belongs in the first call. They can also see when fabrication should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when welding remains close to fabrication. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Okotoks, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use welding as the anchor, then bring in fabrication where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether welding belongs in the first call. They can also see when fabrication should be part of the same conversation. That keeps the path practical without adding sectors that do not belong.

Regina, SK, Canada

We specialize in commercial , industrial and marine projects, including installation of new equipment and maintenance of existing services. All of our employees are licensed and insured for your protection. Please. with your questions or comments, or to schedule a service appointment.

Grande Prairie, AB, CAN

Pipeline spreads need rental gear that can move from access prep to pipe handling without a late yard scramble. Provincial Rentals works from Grande Prairie with heavy duty contractor rentals and pipeline gear for industrial and oilfield construction. Our pipeline rental line supports power, lighting, pipe bending, testing, and field-office setup. Generators and light towers cover site utilities. Bending machines, test trailers, office trailers, and Athey trailers support spread-style activity. Earthmoving machines are available for site preparation and construction access. Each unit is inspected and serviced before it leaves the yard, giving the field plan a clearer condition baseline before mobilization.

Fort McMurray, AB, CAN

Pruden Contracting Ltd is an energy industry service provider based in Fort McMurray, AB. Contact them for reliable oilfield services and solutions.

Calgary, AB, Canada

Facility pipe spools need fit-up and weld quality before they reach the field. Pyramid Prefab Piping Ltd. handles pipe fabrication and welding from SE Calgary, with a 5-acre yard, a 5,000 square foot alloy welding building, and an 18,600 square foot main fabrication shop. Our shop-built piping is planned around material control, clean welds, and less rework at installation. The same setup handles alloy welding and core fabrication when a job needs a controlled shop handoff. With more than 50 years of experience behind the name, we keep the focus on fit-up, materials, and the move from shop to site.

Nisku, AB, CAN

Network Solutions - Original domain name registration and reservation services with variety of internet-related business offerings. Quick, dependable and reliable. Based in Nisku, AB.

Edmonton, AB, Canada

Welds, alloys, and repair plans need a clear answer before parts go back into service. Qualimet - Welding Engineering works from Edmonton with materials engineering, welding consulting, and non-destructive testing across Western Canada. We handle fabrication and commercial construction projects where weld quality and material choice shape the next step. Our team looks at the metal, the joint, and the service condition together. That fits shop or field jobs where a part needs a technical answer before it goes back into service. We pair engineering consulting with non-destructive testing so weld quality and material condition can be checked without cutting into the part. More than 50 years of industry experience sits behind the consultation work. We handle welding engineering and metallurgical review before fabrication or field work continues.

Saskatoon, SK, Canada

Our friendly, knowledgeable staff can help you find the right tool for the job, or the right machine for your shop. With over 25 years experience selling everything from manual lathes and mills to 5-axis CNC machines, Quality Cutting Tools has the in-house expertise to guide you toward the right purchase for you or your business. Our Saskatoon-based service technicians have over 25 years experience troubleshooting and repairing both electrical and mechanical issues with tools, machines, and automation lines. We also offer ongoing preventative maintenance packages to ensure potential issues are caught before they become business-critical shutdowns.

Fort McMurray, AB, Canada

QUALITY ELECTRIC SALES & SERVICE LIMITED We opened in Port-of-Spain, Trinidad and Tobago in 1989 in response to a contract to service six drive motors and large generators for a diesel-electric cruise ship. Customers will find that our machine shop is in a 2,500 sq. ft.-facility outfitted with large-capacity equipment that accommodates oversized components.

Edmonton, AB, Canada

Quality Mechanical Group Ltd is a Contractors-Plumbing & Heating company based in Edmonton, AB.

Medicine Hat, AB, Canada

Electrical faults can stop a shop, building, or jobsite with little warning. Quick Way Electrical & Security handles electrical contracting in Medicine Hat for commercial, residential, and industrial facility systems. We repair existing systems and complete new installations when power, controls, or security wiring has to be brought into line. Construction electrical work sits beside service calls, so the same team can move between new builds and fault repair. Since 1985, our Medicine Hat electricians have worked through older wiring, added equipment, and changing code requirements. We also provide 24-hour emergency response when a power issue cannot wait for the next regular appointment.

Okotoks, AB, Canada

Petroleum facility and industrial building jobs need electrical work that stays on schedule. Quigley Electric Ltd handles electrical contracting from Okotoks for commercial, industrial, residential, petroleum, and service jobs across southern Alberta. Our office has been active since 1971, and we plan electrical jobs around site access, budget, and schedule. That keeps each job practical when timing and safe execution have to stay aligned. For electrical packages in Okotoks and nearby southern Alberta, we keep the scope clear before mobilization.

Fort Assiniboine, AB, Canada

The owner of this domain has not yet uploaded their website. Based in Fort Assiniboine, AB.

Calgary, AB, Canada

Raven Electric - Certified Quality Electrical Service Free Estimate: (604) 834-2635 Email: [email protected] Call Now About Us / About Us R. Raven Electric 25 Year History & Counting We're a team of certified electricians, with deep roots in several local communities. Our passion for our line of work, and care for quality service has helped us become a trusted staple in the lower mainland electrical world. We work diligently to ensure each and every project goes off without a hitch.

Nisku, AB, Canada

R S Machine & Manufacturing Ltd is a Nisku fabrication and machine shop. We build and rebuild oilfield components for drilling work from our Nisku shop. Our team manufactures RSM brand oilfield products and repairs tongs, elevators, bushings, drill pipe, collar slips, BOP components, and Kelly drives. When a rig part needs machining or custom welding, we rebuild it for return to service. We have served Alberta's oil and gas, industrial construction, agriculture, and manufacturing industries since 1985.

Leslieville, AB, CAN

R. Pollitt Oilfield Construction Ltd is an energy industry service provider based in Leslieville, AB. Contact them for reliable oilfield services and solutions.

Elkhorn, MB, Canada

Manitoba’s Oilfield Electric and Automation Company — Elkhorn, Manitoba — Phone 1.204.845.2315 Search this website Home Services Careers. Our History R.T. Jebb Electric Ltd was opened for business in 1971, and has since then been completely dedicated to our customer’s success. We have specialized in the oil industry, and believe our singular focus in that area has produced the most dedicated, talented, and experienced Electricians available.

Brooks, AB, Canada

Our belief is quality supersedes quantity. He joined a construction crew in 1998, and rough framed houses and condominiums, until moving to AB in May of 2000. He found work with a local contractor, framing custom homes around the Brooks Ab area that first summer.

Grande Prairie, AB, Canada

When a repair needs a torch on site, moving the part can cost more time than bringing the welder in. Ray Jacob Welding handles portable welding and on-site fabrication in Grande Prairie for project work that has to stay in place. We handle MIG and TIG repairs on steel jobs. Aluminum and cast iron follow a different path, with brazing available when the joint calls for another process. The shop is set up for project-site welding in Grande Prairie, so field work and fabrication stay on one path instead of splitting between travel and shop time.

Edmonton, AB, Canada

Vac truck downtime can stop a field job, so Rayline Welding Ltd keeps repair practical from its Edmonton shop. We provide custom welding and fabrication repair for units that need to return to work across British Columbia, Alberta, and Saskatchewan. Vac truck repair is the clearest fit. Wallenstein and Vacutrux units are part of the day-to-day shop focus, and the team can handle damaged components when welding or fabrication is the right path. Rayline is family run, with more than 55 years of combined experience and 27 years serving clients. For an industrial facility or field cleanup fleet, the value is a local shop that understands the truck and the repair target.

Red Deer County, AB, Canada

Deep foundation construction is critical when heavy structures need reliable load support in difficult ground. Red Deer Piling Inc works from Red Deer County as Pile Drivers and piling specialists for industrial, commercial, and government projects across Alberta, British Columbia, and Saskatchewan. We build drilled straight shaft and belled caissons for foundation scopes that need size, depth, and soil conditions reviewed before drilling starts. Our equipment and technical experience also cover vibro work, earth retention systems, CFA, tiedowns, and micropiles. Heavy shoring and foundation projects often change once subsurface conditions are opened up. Our piling team plans around access, ground behavior, and constructability so the foundation method matches the site. Our Red Deer County base serves regional foundation projects where piling, caissons, and shoring need experienced field execution.

Red Deer, AB, CAN

Red Flame Industries offers specialized pipeline services, including hot tapping, NDT, and custom manufacturing, across Canada with safety and quality at the forefront. Based in Red Deer, Red Deer, AB.

Sherwood Park, AB, CAN

Red-D-Arc Welderentals provides Welding-Equipment Rental services to oil and gas operators in Sherwood Park, AB and across Western Canada.

Grande Prairie, AB, CAN

About | Rees NDT Inspection Services Ltd. We are a 24/7/365 inspection company that has been proudly serving Northwestern Canada since 1978. We have decades of experience and a reputation for reliability providing trusted N.D. Based in Grande Prairie, Grande Prairie, AB.

Bonnyville, AB, Canada

Regent Electric - Electrical Contractor, Electrician Home Design and Build Solar Energy Fire Alarm Service Past Projects Lighting About Us. About Us Regent Electric is an electrical contractor in Bonnyville and has been servicing the Lakeland area since 1979. We have completed projects all across Alberta, as well as in BC and Saskatchewan. We provide professional service and quality workmanship. See our Past Projects section for a small sample of the many projects we have completed.

Nisku, AB, Canada

Hydraulic gear takes a beating on industrial and oilfield jobs, and a leaking cylinder or failed pump can stop a machine cold. We are Reliance Hydraulic Systems & Mechanical Service Ltd, working out of Nisku to keep that equipment running. Our shop handles hydraulic cylinder and system repair along with general mechanical work for clients in the construction and energy trades. Sitting in the Nisku industrial park puts us close to the oil and gas service companies that depend on hydraulics every day, and we build our schedule around getting their machines back to the job. We are a small, hands-on outfit, so the people who diagnose a problem are the same ones who fix it. That keeps the turnaround tight and the communication direct. Customers bring us cylinders, pumps, and mechanical assemblies that need rebuilding or repair, and we focus on doing the job once and doing it right so the gear holds up under field conditions.

Fort McMurray, AB, Canada

CEDA has a proud history in North America. With roots extending back to 1973, we have been bringing innovative technologies, equipment and processes into the field to ensure the success of our clients’ projects. CEDA's talented and experienced team is committed to delivering world-class solutions to help our clients maximize production, mitigate risk and avoid costly outages, always with safety top of mind. We see our job as: Understanding your challenge Offering solutions and owning the execution of the solutions Helping you to drive down costs and increase productivity Why CEDA.