Drilling Products & Services Companies

Calgary, AB, CAN

Reservoir coring gets expensive when recovery targets, tool design, and rig timing are not planned together. Foothills Resource Services Ltd. works from Calgary on coring programs for oil and gas projects that need core recovery and dependable equipment. We began as Foothills Diamond Coring and have provided coring services since 1960. That history connects field coring with the design and manufacture of coring equipment, so the tool plan can match the formation and drilling program. Foothills publishes conventional coring, wireline coring, specialty coring, site services, coring equipment, pre-set drilling, hydrostatic testing, project management, and provision of services. The public site also emphasizes rates of penetration, core recovery, secure retrieval, and quality cores for enhanced analysis. For a Foothills request, the planning details are core objective, formation, barrel and bit selection, wireline need, testing requirement, rig timing, and whether the job needs field execution or equipment support. Pricing, insurance, and emergency availability are not published in the reviewed source text.

Remote mine and industrial sites need drilling plans that match ground conditions, water control, and access limits. Foraco Calgary Canada Ltd works from Calgary, AB, with oil sands mine drilling and industrial drilling capability tied to Foraco International's global drilling group. We drill for mineral exploration and industrial water needs, including wells used for drinking water, irrigation water, and industrial water. That experience supports mine dewatering planning where reliable water access and subsurface knowledge are part of the same jobsite problem. Foraco has operated since 1961 and reports 255 operating drill rigs across its worldwide presence. Our teams are built for difficult field settings, including remote locations, Arctic territory, deserts, rain forests, and high-altitude areas. For oil sands, mining, and industrial clients near Calgary, our drilling conversations start with the site condition, target depth, water objective, and field access. The goal is a drilling plan that fits the asset, the terrain, and the operating window.

Nisku, AB, CAN

Drill pipe and OCTG inspection work has to catch damage before it reaches the next run. Force South Inspection Services handles pipe inspection, drill pipe services, and mobile field repair from Nisku for oilfield tubular programs. Our Nisku operation includes in-plant inspection and field service. Evidence from the site names bottom-hole assembly inspection, transverse electromagnetic drill pipe inspection, refacing, and straightening. We also work in OCTG inspection and repair, threading, manufacturing, and tubing protection. These service families connect shop inspection with the repair steps needed to return tubulars to a usable condition. Force Inspection Services Inc. was established in 2003 and is headquartered in Nisku, Alberta. Our inspection and threading work is planned around pipe condition, tool string demands, and field schedules for Western Canadian oilfield activity.

Calgary, AB, CAN

Foremost Industries is a diversified energy equipment manufacturer and service provider delivering drilling rigs, hydrovac units, tanks, vessels, industrial coatings, and off-highway vehicles to oil and gas operators across Western Canada and internationally. Formed through the 2013 consolidation of Universal Industries, Maloney Industries, Corlac, and Peaceland Fabrication, Foremost combines over 75 years of manufacturing expertise with ISO 9001, ASME, and CWB certifications. With 248.8M in 2025 revenue and a strong multi-year backlog, Foremost is the equipment partner energy producers depend on for reliable, engineered solutions.

Medicine Hat, AB, CAN

What starts as a drawing or a worn-out part often ends up on our shop floor in Medicine Hat. Form-Tech Machining and Fabrication Ltd grew from a small machine shop founded in 1993 into a full-service contract manufacturer, and we still treat every job as a problem to be solved with care. Our plant runs multi-axis and conventional CNC machining alongside laser, water-jet, plasma and oxy-fuel cutting. We roll and brake plate, weld in aluminum, stainless and carbon steel, and finish parts with powder-coating and sandblasting under one roof. Keeping these steps in house means we can hold tight tolerances and move a job from raw stock to a finished, coated piece without shipping it around. We machine and fabricate for oil and gas, mining, utilities, defence, agriculture and government customers. Some need a single precision part, others need a full production run, and we scale to either. If you have a component that has to be exact, or a fabrication job that needs steady hands and the right tooling, send us the details and we will tell you how we would build it.

A rig package can stall when pipe-handling gear, pump parts, or flow-control items are sourced one piece at a time. Forum Energy Technologies Canada connects the Edmonton office with FET product lines for upstream, midstream, subsea, and intervention jobs. Our drilling path starts on the rig floor. FET publishes pipe handling, hoisting, iron roughneck, pipe spinner, catwalk, mud handling, fluid-end, pump, and drill-pipe float valve products for rig packages that need compatible components. Production and midstream requests move through a different set of decisions. We can point a request toward produced-fluid handling, choke and control valves, gate valves, sand separators, gas production units, line heaters, heater treaters, gas dehydration, pigging hardware, vapor recovery, piping skids, or ASME-code vessels. FET also manufactures downhole, completion, coiled-tubing, wireline, subsea, and valve products under a large brand portfolio. For an Edmonton request, the planning details are application, pressure duty, tool family, brand compatibility, spare-parts need, and whether the answer belongs in drilling, production, intervention, or subsea equipment.

Long-reach horizontal wells need a drilling plan that holds pace across the pad. Fox Drilling LP is a Southern Alberta Drilling-Contractor with operations in Central and Northern Alberta, focused on pad batch drilling for oil and gas wells. We specialize in pad drilling where repeatable rig moves, well sequence, and horizontal reach shape the program. This is the setting where our high-performance drilling rigs are used. Established in 2009, Fox Drilling has built an advanced fleet over more than a decade and a half. Our drilling service is built around safe execution, quality field performance, and HSE discipline. From our Lethbridge base, we plan drilling activity for Southern Alberta and support programs farther north when the project calls for our rig capability.

Slave Lake, AB, CAN

Frank's Power Tongs Ltd provides Tongs-Power services in Slave Lake, AB.

Nisku, AB, Canada

Large fabricated assemblies need room to move before blasting and coating can begin. Frank's Sandblasting & Painting handles industrial sandblasting and blasting from multiple Nisku, Alberta plant locations for equipment, steel, and facility components that require controlled surface preparation. Our Nisku plants are built for heavy work. Plant 1 has eight 15 tonne overhead cranes running the length of the facility, Plant 3 has two 5 tonne overhead cranes, and Plant 5 has three 15 tonne overhead cranes. That handling capacity helps us stage heavier parts through blasting and coating steps without treating every job like a small shop item. Coating quality is managed with named quality-control contacts, including NACE Coating Inspector Level 2 personnel listed for our Nisku locations. This shows up on industrial coating jobs where surface profile, coating condition, and inspection discipline need to stay tied to the same production plan. We work from Nisku for industrial customers planning sandblasting, blasting, and coating work around part size, crane handling, and plant availability.

La Crete, AB, CAN

ABOUT US – Frontier Auto [email protected] Employee Login 1-780-928-3885 1-780-928-2146 “After hours call out # 780-285-2885. A call out charge will apply" Specializing in quality auto parts, industrial and farm supply. Pages Navigation Menu HOME ABOUT US CAREERS CONTACT US CREDIT APPLICATION ABOUT US Frontier Auto & Industrial Supply has been a highly recognized source for automotive , farm and industrial parts in the La Crete area. Based in La Crete, AB.

Grande Prairie, AB, Canada

Environmental and commercial sites around Grande Prairie often need shallow drilling before monitoring, assessment, or construction work can move ahead. Frontier Enviro-Drilling Ltd. handles auger drilling as an environmental drilling contractor for Grande Prairie and Peace River projects. We are recognized locally for safe, experienced, and efficient drilling. Our field work is built for environmental and geotechnical drilling needs where ground conditions, access, and schedule all affect the plan. Auger drilling is used when a site needs soil information, environmental sampling access, or geotechnical data without a larger drilling setup. We match the approach to commercial sites and field conditions in the Peace Region. Our Grande Prairie drilling team can plan environmental drilling contractor work around the site, the target depth, and the project timing. The same local service base also supports Peace River jobs that need practical geotechnical drilling response.

Sundre, AB, Canada

Frontier Machine & Fabrication offers Blasting, Construction, Demolition, Fittings, and 5 more service areas services from Sundre, AB.

Red Deer, AB, Canada

Well integrity issues can shut in production and complicate abandonment plans. Performance Energy Services handles remedial cementing and well servicing for oilfield wells across Alberta and Saskatchewan. We focus on cement placement jobs that correct isolation, seal problem intervals, and set up the next field step. Our field planning centers on pressure control, pumping requirements, and site access for active wells and legacy wells alike. From Alberta, we plan remedial cementing scopes around Western Canada well conditions.

Donalda, AB, Canada

Full Circle Plastics transforms recycled materials into sustainable products for your projects. Help us build a greener future with innovative plastic solutions!

Wetaskiwin, AB, CAN

About - G&B Rubber Products (1998) Ltd Skip to main content We are a locally owned and operated production facility located in Wetaskiwin, Alberta, and 80 kilometers south of Edmonton. For over the past 50 years we have manufacturered rubber products and components for oilfield and industrial use. We produce in many different types of elastometers such as Aflas, HNBR/HSN NBR, Natural, Neoprene, Urethane and Viton . Based in Wetaskiwin, AB.

Fox Creek, AB, CAN

Soft access, heavy lifts, and short-notice transport are common problems around Fox Creek field sites. G & L Crane & Specialized Hauling works from Fox Creek with crane rental and specialized hauling for industrial and oilfield jobs. Our lift planning can pair cranes or knucklebooms with hauling when a load needs both services. We also run winch tractors and hotshot service for field moves that need fast transport or pulling capacity. Ground conditions often decide whether a job can start. We rent 8 by 40 foot and 8 by 20 foot matting for wet or uneven access, and we rent light towers when visibility is part of the site plan. Heavy equipment adds another layer for local field needs. Track skid steer, loader, and excavator availability helps with site handling around the same Fox Creek service base. Scrap metal bins and garbage bins are available with delivery and pickup service. Our Fox Creek dispatch plans crane rental, trucking, matting, tower, and bin needs around local access and timing.

Bonnyville, AB, CAN

Turnaround cleaning can stall a site when confined spaces, wash water, and access controls are left until the last minute. GForce Oilfield Services Inc works north of Bonnyville with vacuum truck service and high pressure cleaning for oilfield and industrial sites that need the cleaning plan shaped before activity begins. We began as Gervais Trucking in 1992 and became GForce in 2004. In 2012, our team moved deeper into high pressure cleaning, giving oilfield and industrial customers a stronger path for wash jobs tied to access, safety, and turnaround timing. Confined-space cleaning needs trained people and a clean sequence. Vacuum truck capacity can be coordinated with high pressure water cleaning and trucking around the material, entry conditions, disposal needs, and field controls. Our Bonnyville field response is built for cleaning scopes where downtime, site access, and wash water handling affect the day. The right plan starts with the space, the residue, the access point, and the service window.

Calgary, AB, CAN

G.S.K. Transport Ltd provides Core-Vans, Trucking-Hot Shot services to oil and gas operators in Calgary, AB and across Western Canada.

Grande Prairie, AB, CAN

G. P. Masonry Supply provides Concrete-Products, Septic Tanks, Geotextiles services to oil and gas operators in Grande Prairie, AB and across Western Canada.

Calgary, AB, Canada

Fluid condition can change a maintenance plan before a failure reaches the field. Metro Tech Systems Ltd is our Calgary laboratory for fluid analysis of petroleum products, lubricants, and oil filter debris, with service to clients throughout North America. We test and report on fluid samples used in oilfield, fleet, plant, and industrial equipment. Clear analysis helps maintenance teams understand contamination, wear debris, lubricant condition, and product quality before the next service decision. Our laboratory and consulting work has focused on petroleum products and lubricants since 1969. We pair proper testing with plain interpretation, so results can be used in a shop, plant, or field maintenance setting. For Calgary-based fluid analysis, our team handles petroleum product testing, lubricant analysis, and oil filter debris review for equipment programs across Western Canada and wider North American operations.

Edmonton, AB, CAN

Garritty And Baker Geotechnical Drilling Inc provides Drilling-Contractors, Environmental Contractors, Environmental Drilling Contractors services to oil and gas operators in Edmonton, AB and across Western Canada.

Specialized blowout preventer and well control equipment provider offering sales, service, repair, and recertification to ensure safe drilling operations.

Regina, SK, Canada

Pipeline coating and tank assets depend on clean steel and a finish that holds under weather, abrasion, and buried service. General Sandblasting & Painting Ltd. handles sandblasting and protective coating from Regina for construction, facility upgrades, and infrastructure projects. We prepare steel surfaces so the coating can bond to tanks, structural steel, and pipeline-related assets. The surface profile is planned around the specification, site conditions, and asset shape. For pipeline coating applications, our certified applicators work to CSA Z245.30. Large jobs can move through our Regina workforce and blasting capacity when the schedule calls for industrial-scale surface preparation.

Calgary, AB, Canada

Heavy crude loses value when the stream is hard to upgrade. Genoil Inc. develops oil and gas technology in Calgary for heavy-oil upgrading, petroleum engineering, and oily water separation. Our GHU technology history started in 1998 under Canadian Environmental Equipment and Engineering Technologies Inc. That development path sits behind the upgrader and environmental line. Genoil also describes low-cost environmental solutions for diesel shortages and product inventory gaps. From Calgary, we keep the focus on upgrading capacity, separator needs, and making more transportation fuel from existing crude volumes.

Tilley, AB, CAN

Casing jobs need tong capacity matched to pipe size and field conditions. George's Power Tong Services Ltd supplies Tongs-Power service from Tilley for oilfield casing operations across Central and Southern Alberta. We are a family-run oilfield service business with history back to 1988. Our tools include conventional and integral power tongs for casing sizes from 13 3/8 inches down. The job is narrow and practical: bring the right power tong setup to the wellsite, handle casing connection makeup, and keep field readiness clear before the run. Our Tilley-based team plans power tong availability around casing size, location, and oilfield schedule across Central and Southern Alberta.

Prince George, BC, Canada

Ground risk needs clear subsurface data before a road, mine, plant, dock, or industrial site moves ahead. From Prince George, Geotech Drilling Services works as a drilling contractor for geotechnical, exploration, environmental, and construction drilling across Canada, the United States, South America, and Greenland. We drill to define what sits below the surface. Geotechnical drilling confirms ground conditions for infrastructure planning, while exploration drilling helps assess a property before major development money is committed. Environmental drilling is used when soil, groundwater, or other subsurface material must be checked and monitored. Our marine services add near-shore drilling and testing for sites where access, water depth, and ground conditions affect the plan. Geotech is a multi-discipline surface, marine, and underground drilling team. Technically advanced equipment and skilled field personnel let us build drilling programs around access, sample quality, ground conditions, and project scope. Our Prince George team can plan drilling contractor work for geotechnical, exploration, environmental, construction, marine, surface, or underground programs where the subsurface answer has to be dependable.

Grande Prairie, AB, Canada

We understand and recognize that safety is a company-wide obligation, and is not to be taken lightly. By continuing to focus on frequently updating and improving our safety standards we continue to not only meet, but exceed the ever-changing scope and dynamic of the oil and gas industry. SAFETY STATISTICS Throughout the history of Bexson Transport, we have maintained an exceptional safety rating exemplifying our companies level of professional, efficient, and safely executed operations. Bexson Transport's is a Satisfactory Audited company with a current Risk Factor Score of 0.000.

Fort St John, BC, CAN

A casing job can lose time when the connection is dirty, the torque record is unclear, or the tong fleet is not ready. Giant Power Tongs works from Fort St. John on casing services for oil and gas activity in northeastern British Columbia and northern Alberta. Our field path covers tubular running, threadwashing, computer torque monitoring, and thread inspection. Those services keep the casing workflow focused on connection condition, make-up control, and the next joint in the string. Giant Power Tongs operates as a division of Stuart Wood Ventures Ltd. and has served the region since 2008. The public site lists six tong trucks for field work, giving the operation a defined service fleet rather than a vague gear claim. Safety and compliance appear in the structured fields where they belong. The public profile keeps the selling story centered on casing service, tubular running, and Fort St. John field coverage.

Calgary, AB, CAN

Gibson Energy provides Mud Additives, Paraffin Control, Crude-Transporters, Hazardous Goods-Sealed Sour Oil Transportation, Waste Management, Completion Services, Trucks-Tank services to oil and gas operators in Calgary, AB and across Western Canada.

Calgary, AB, CAN

Pressure control parts have to match the wellsite job and the test requirement before they go back into service. GKD Industries Ltd. machines wireline equipment in Calgary for oil and gas pressure work. Our shop also builds hammer unions and valves for flow control work. When a standard part does not match the connection or the repair scope, we machine the component here. Testing is part of the path. We perform hydrostatic pressure testing and hardness testing. Magnetic particle testing, ultrasonic thickness testing, and surface finish checks round out the inspection path. From our Calgary machine shop, we handle well stimulation and slickline pressure control equipment with the drawing, dimensions, and test requirements already defined.

Okotoks, AB, CAN

Wellsites, road projects, and rural facilities need clean water delivered in the right volume before the job stalls. From Okotoks, Glacier Water Transport hauls potable water for Calgary, Rocky View County, the MD of Foothills, and select nearby areas. Our water hauling covers fresh water supply for well site shacks, consultant shacks, boilers, rig tanks, casing integrity tests, frac tanks, and holding ponds. Those are field situations where water timing affects drilling, completions, testing, or site readiness. Water spreading is part of our construction and road building service. We handle dust control on streets, haul roads, and job sites, plus compaction water spreading for road work and product piles. Since 1993, we have specialized in large-volume potable water hauling in southern Alberta. Glacier Water Transport plans each delivery around the destination, water volume, and site use so the truck arrives ready for the application.

Wainwright, AB, CAN

Internal pipe, tanks, and welded steel need coating systems that stand up to corrosion. Global Fusion Coating Inc. handles protective coatings and abrasive blasting from Wainwright, Alberta, for pipeline, vessel, and industrial applications. We specialize in 100% solids based coating, FBE lining and coating, internal liquid lining, and airless coating application. These coating methods help protect pipe interiors and steel surfaces exposed to service conditions. Post weld heat treat oven capability adds another step for fabrication and repair work tied to coated pipe and welded components. Our blasting and coating process is built around surface preparation, application control, and timely service. Health, safety, and environmental protection are built into our daily coating operations. For Alberta pipeline and industrial coating needs, our Wainwright shop focuses on corrosion-control work from preparation through final application.

Calgary, AB, Canada

Long pipeline spreads and transportation corridors need survey control that stays accurate over distance. Global Raymac Surveys handles land surveying, geomatics, and pipeline survey work from Calgary for projects across Western Canada. Our team takes on RPRs, small commercial construction, and large pipeline construction that stretches hundreds of kilometres. We have 9 locations and field teams across Alberta, Saskatchewan, and British Columbia, so route work and construction staking can move with the job. Mobile mapping is part of that service. We operate Canada's first Trimble MX9 unit, which can capture a million points per second with sub-inch accuracy at highway speeds. Since 1978, we have completed more than 16,000 projects. That experience fits survey programs where turnaround, route length, and data quality set the job plan.

Leduc, AB, Canada

Global Service Rig & Repair (2005) Ltd offers Rig-Manufacturers services from Leduc, AB.

Calgary, AB, Canada

When OCTG or line pipe shows up late, well construction slows. Global Steel Ltd in Calgary keeps those pipe orders moving for wellsite and pipeline work across Alberta. We also coordinate primary cementing equipment and wellhead gear on jobs that need more than line pipe alone. Sucker rods and markers cover the smaller-piece needs. Pup joints stay in the order when spacing needs exact lengths. Established in 1990, our Calgary base coordinates storage and delivery for Canadian well construction and pipeline projects.

Red Deer, AB, CAN

FET’s Global Coiled Tubing solutions include coiled tubing equipment for sale, engineered for onshore and subsea operations. Request a quote today! Based in Red Deer, AB.

Dawson Creek, BC, Canada

Go Welding & Fabrication provides custom fabrication, sandblasting, welding, and tank building from Dawson Creek, British Columbia, serving oil and gas and industrial clients in the Peace River region.

Earth Drilling provides oil sands mine drilling and geotechnical drilling services from Calgary, serving operators across Alberta with precision drilling solutions.

Rocanville, SK, Canada

High-pressure piping and shop-built steel work need clean layout and sound welds. Goodman Steel & Ironworks (1986) Ltd in Rocanville handles metal fabrication and machining for oil and gas projects and industrial steel work across southeastern Saskatchewan. Structural steel and platework move through the same shop. Tanks and pressure vessels come through as well, along with industrial piping for projects that need shop-built steel before install. Surface preparation and industrial paint finish parts before they leave the yard. Our engineering support stays with the job when drawings or technical review need to sit beside the fabrication plan. The same team is a member of the Association of Professional Engineers & Geoscientists of Saskatchewan.

Brooks, AB, Canada

Oilfield freight in Brooks needs a carrier that understands short notice and site timing. Gopher Hot Shot has run from Brooks, Alberta since 1997, moving hot shot loads for oilfield work across southeastern Alberta. We keep light towers and pipe trailers with rails available for jobs that need night lighting or pipe handling at site. That rental support sits beside the transport plan instead of becoming a separate delay. Yearly CVIP inspections, an alcohol and drug policy, and monthly safety meetings back the fleet. Our Brooks base stays close to the kind of oilfield movement and rental support that remote work needs.