Access roads, pads, yards, and foundations start with dependable material supply. Knelsen Sand & Gravel works from the Grande Prairie area with ready-mix concrete and sand and gravel for construction, municipal, commercial, and industrial projects across Western Canada.
We process raw aggregates into spec products and recycle materials that can be reused. That aggregate work supports road building, site grading, drainage layers, and concrete production where consistent material is needed.
Portable ready-mix concrete helps when a project is far from a fixed plant or needs concrete closer to the pour. Our concrete and precast product lines serve practical construction needs for infrastructure, facilities, and field sites.
Knelsen also has in-house construction, maintenance, and transportation capability tied to concrete, aggregate, and asphalt work. For energy-adjacent infrastructure in northwestern Alberta, our material supply can be planned around haul distance, site access, and project stage.
A drilling program can lose time when the first phase is not set up for the next one. Komat Drilling works as a Drilling Contractors team from Weyburn, Saskatchewan, with specialty drilling and pre-setting services for oil and gas programs in Western Canada.
Since 2003, we have focused on efficient alternatives for Canadian oil and gas drilling work. Our role is to help set the drilling plan up with the right specialty service before larger program costs build.
Pre-setting is a practical fit when a program needs early-hole work handled with speed, control, and clear planning. Specialty drilling gives us room to solve site-specific drilling problems without treating every well program the same way.
Our Weyburn drilling team plans Western Canada scopes around the program objective, field conditions, and the point where specialty drilling can reduce delay in the wider oil and gas schedule.
A lifting failure or welding-machine outage can stop a shop, plant, or fabrication bay before the job is ready. Kristian Electric Ltd works from Calgary, Edmonton, and Saskatoon on overhead cranes, hoists, and welding equipment for industrial facilities.
Our overhead lifting work helps production floors and maintenance shops keep cranes and hoists ready for daily use. Welding equipment service supports fabrication bays where machine downtime can block the next repair or build.
For a Kristian Electric request, start with the crane or hoist type and the facility location. Welding machine issues, inspection needs, and parts requirements shape the technical path.
Water supply problems can stop a rural site, industrial yard, or recreational facility from working the way it should. L & B Water Services Ltd handles water well drilling, water well testing, pump work, cistern systems, and water treatment from Stony Plain for Edmonton and central Alberta.
We design and install cistern tank systems when a site needs stored water with dependable delivery. Pumps, pressure tanks, and variable speed drives are matched to the water demand so the system can move water where it is needed.
Water testing and treatment help identify quality issues before a system is sized or changed. Filtration and treatment work is planned around the water source, the building demand, and the operating setting.
Since 1988, our team has worked across community, business, industrial, and recreational water systems in Alberta. Our Stony Plain water service team can plan drilling, pump testing, treatment, and cistern work around the site water need.
HVAC and structural steel need tight coordination before material reaches the site. In Edmonton, L A Brayer Industries Ltd fabricates structural steel, plate, and HVAC systems for facility, institutional, and commercial projects.
We handle structural steel fabrication, plate fabrication, plasma cutting, and welding from an Edmonton shop with design and engineering capability tied to the build. That gives each project a clearer path from drawing to fabricated component.
Our HVAC fabrication and installation experience applies to heating, ventilation, and air conditioning systems for larger facilities. We focus on ducting and related fabricated assemblies where field fit, air movement, and access affect the final result.
L A Brayer Industries Ltd is certified by the Canadian Welding Bureau to CSA Standard W47.1 for fusion welding of steel structures. For structural steel and plate fabrication, that standard is part of the service itself, not a side note.
Our Edmonton team plans fabrication around the project type, drawing requirements, and site installation needs for facility builds.
L A Power is a leading holding company specializing in commercial and residential rental properties in Lethbridge, AB. We also offer expert services in signage and hydrovac solutions, ensuring quality and reliability for all your property and service needs.
Today, we honor that legacy while stepping confidently into the future under new ownership. Expect the same reliability you’ve always known, now backed by modern improvements and expanded services. Something exciting is happening.
Casing jobs need clean threads, controlled torque, and equipment that fits the service-rig plan. K&S Power Tongs runs power tong services from Lloydminster for oil and gas work across the Alberta-Saskatchewan region.
Our field setup includes conventional and integral power tongs, Volant casing running tools, and computer torque-turn systems. Thread washing and inspection help when pipe condition threatens the schedule, while rentals and light hauling cover the logistics around the casing job.
For a tong request, the planning points are casing size, thread condition, torque documentation, rig timing, rental need, and hauling requirement. We keep the power tong path tied to the connection program on the well.
Leading Edge Heat Treating Services Ltd provides Heat Treating-Metals, Heat Exchangers services to oil and gas operators in Edmonton, AB and across Western Canada.
Energy projects need tank and pressure equipment fabrication that is planned around code, weld procedure, and field fit-up. Leading Manufacturing Group Inc. manufactures steel storage tanks, pressure vessels, fittings, structural assemblies, and pressure piping from Nisku for energy-sector work in Alberta and Saskatchewan.
We build around the asset first. A storage tank, pressure vessel, or piping package may need fabrication, welding, blasting, coating, painting, insulation, and quality control before it is ready for site delivery.
Our ABSA authorization covers ASME Section VIII Division 1 pressure vessels, ASME B31.1 power piping, ASME B31.3 process piping systems, Category H fittings, and pressure welder testing. Those standards are part of the pressure equipment service itself.
Since 2010, our manufacturing locations have served energy projects that need custom steel work rather than off-the-shelf equipment. Our Nisku team can plan fabrication scope for tanks, pressure vessels, structural assemblies, fittings, and pressure piping tied to Alberta and Saskatchewan facilities.
A jar has to deliver the right impact downhole after heat, torque, and hole conditions change the job. Lee Oilfield Service Ltd. works from Edmonton on hydraulic oilfield jars for drilling and fishing applications.
We manufacture, assemble, service, test, and rent jars built from Canadian-made components. The shop machines critical areas to close tolerances, uses heat-treated 4145H or better steel stock, and can modify designs for special operating conditions.
Servicing is handled as a full teardown and test path. Jars are tested before dismantling, cleaned, inspected, checked with magnetic particle or ultrasonic techniques when parts are in question, rebuilt with new seals and hydraulic fluid, then tested again against published operating values.
Lee Oilfield has more than five decades of jar-use experience behind its product work. H2S-resistant tools are available on request, and rental terms are published for jobs that need jar access without a purchase.
NXL Technologies designs, machines and manufactures custom coiled tubing and wireline pressure control equipment for oil & gas companies throughout the world. Based in Red Deer, AB.
was founded by Tracy Peacock and Al Simard which have a combined 20 years’ experience in the communications industry. It had always been a dream to run a company of their own. “We have worked well as a team and we both believe in exceptional customer service. Without the Customer, there is no business.” Some of Our Amazing Clients Harvest Operations Corp.
Leross Oilfield Service Ltd gives customers a clearer starting point for manufacturing around Calgary, AB. The nearby scope includes repair planning, parts supply and inspection. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our manufacturing scope starts with the condition of the asset. It can build equipment around the pressure, fit, and operating need. The repair planning side helps customers find the fault and choose a repair path. For customers in Calgary, AB, that means fewer vague calls and a better start for quoting or planning.
With parts supply, the important details are fit, access, timing, and handoff. It can reduce downtime by finding replacement items quickly. The inspection side helps customers check condition before the next stage starts. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Drill pipe works best when it is tied to the way the job will be installed or repaired. That capability helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
Manufacturing changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes oil and gas and repair. That keeps the page close to the source facts without drifting into broad claims.
Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect manufacturing with repair planning so the request can move from a rough need into a clearer service discussion around Calgary, AB.
The practical benefit is less confusion at the start of the job. When manufacturing is explained through real use cases, the customer can ask a sharper question and avoid sending the request to the wrong place. Repair planning gives that request a related path when the first issue turns into a part or repair question. Around Calgary, AB, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope.
The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with manufacturing and then connecting it to repair planning, parts supply and inspection keeps that conversation anchored. This scope connects to oil and gas and repair. Listed as established in 2007, the operation also has a continuity signal for repeat local purchasing. Around Calgary, AB, we describe the scope a customer can discuss and the operating setting it fits. Planning stays clearer when manufacturing remains close to repair planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Calgary, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use manufacturing as the anchor, then bring in repair planning where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether manufacturing belongs in the first call. They can also see when repair planning should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when manufacturing remains close to repair planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Calgary, AB sets the local context without turning the description into a street-address block.
100% locally owned & operated. We carry top quality professional tools, accessories, fasteners, safety products and more for your needs. Shop online, call, email or visit us in-store!
Hotsy Pressure Washers We are a proud to be a Western Canada and North Dakota dealer for the globally-known Hotsy brand of hot and cold pressure washers. Regardless of your industrial, commercial or residential application, we have a powerful cleaning solution. In fact, we have over 100 models available. Water Blast Manufacturing If you need more than a standard unit, Water Blast Manufacturing can build the exact cleaning system you need.
Dry wood fibre can be part of a drilling mud additive program when the job calls for a clean residual lumber product. LI'l Shaver supplies kiln-dried spruce and pine wood shavings from Olds, Alberta, with sawdust and drilling mud additives listed in our product scope.
Our shavings come from spruce and pine lumber and are dried in Alberta's cool Canadian climate. The result is a very dry shaving product with no additives or preservatives.
Because the shavings are residual products, we do not cut trees for the express purpose of making them. That gives mud additive customers a fibre source tied to lumber processing rather than a separate harvest stream.
We have operated from Olds since 1980, supplying wood shavings, sawdust, and drilling mud additive material for customers that need dry, consistent fibre products.
When an overhead crane or hoist is due for inspection, production can slow down fast. Lifting Equipment Ltd. in Calgary handles overhead crane and hoist inspections for oil and gas, industrial, and petrochemical sites across Alberta and Western Canada.
We also handle lifting-device service and equipment sales for the material handling gear that keeps shops and plants moving. Installation and engineering come into play when a crane or hoist needs more than inspection alone.
Our Calgary team plans crane and hoist work around plant access, shop schedules, and field windows across Western Canada.
Linde Canada Inc Did you know that your internet browser is out of date. Alternatively, you can visit us through a mobile device (smart phone or tablet).
was created to provide utility line locating services to anyone proposing to conduct ground disturbance. Many organizations or private landowners have secondary services past the meter that need to be located before the works starts. offers the best rates in Southern Alberta to help you locate your privately owned facilities.
Little Guy Rentals has been Alberta's Access Mats specialists since 2004. We offer rig mats, swamp mats and high performance composite matting. Based in Leduc, AB.
Check out our amazing inventory of products that are regularly updating. Bishop Industrial Products Ltd. Bishop Industrial Products Ltd. Return to shop 0 Cart About Us Products Services Partners Terms. Bishop Industrial Products Ltd., i s a multi-line distributor of world class products specializing in Pump, Pressure Wash and Air Compressor Equipment and related accessories.
was founded by Tracy Peacock and Al Simard which have a combined 20 years’ experience in the communications industry. It had always been a dream to run a company of their own. “We have worked well as a team and we both believe in exceptional customer service. Without the Customer, there is no business.” Some of Our Amazing Clients Harvest Operations Corp.
A casing run depends on tong setup, torque control, and field technicians who know the wellsite pace. TNT Integrated Services supports Tongs-Power operations across Alberta and Western Canada, including profile coverage tied to High Prairie.
We work with power tongs and pipe jacks for casing jobs. Torque monitoring and thread inspection support connection makeup when premium or API casing is part of the program.
Our technicians bring oilfield backgrounds from well servicing and tubular handling. TNT Power Tongs field staff have operated across a wide range of well types, with advanced torque technology used in current field service.
For High Prairie-area casing activity, our support is built around wellsite readiness, measured makeup, and power tong gear matched to the casing plan.
Logan Completion Systems provides Fishing Tools, Tools-Downhole, Completion Tools, Packers services to oil and gas operators in Lloydminster, AB and across Western Canada.
Lost circulation in drilling mud can slow a well plan and waste fluid. Lone Pine Supply Ltd. supplies lost circulation material and cellulose absorbents from Linden, Alberta for oilfield, environmental, and agricultural applications.
We have served these markets since 1997. Our mud-related supply focus is lost circulation material, often called LCM, used when drilling fluid is being lost into formations and the fluid system needs support.
Cellulose absorbents serve a different site need. They are used where spills, moisture, or cleanup requirements call for absorbent material suited to environmental and field conditions.
For oilfield mud and absorbent supply from Linden, our team keeps the product conversation tied to LCM, cellulose absorbents, and the site use case driving the order.
Lonestar Oilfield Services 2009 Inc provides Drilling-Motors Downhole, Tools-Downhole services to oil and gas operators in Camrose, AB and across Western Canada.
Rig mat access starts in the shop before it reaches a lease road or industrial yard. From Nisku, Lougheed Welding & Fabrication works with welding and rig mat capability for oilfield and industrial access needs in Alberta.
Our Nisku location gives projects a local welding contact in one of Alberta's main energy service hubs. The source evidence names rig mats, welding, and fabrication, so our profile stays focused on matting and welding work rather than unrelated services.
When access conditions call for matting, welded components and fabricated mat structures need to stand up to repeated moves and heavy equipment. We keep that service conversation tied to rig mats and practical field access from our 18 Avenue shop in Nisku.
With multiple locations and a commitment to top-quality service , we ensure that your vehicle stays in peak condition—without the wait. History & Milestones of Lube City Our Journey: From Humble Beginnings to Alberta’s Premier Oil Change Provider At Lube City , our story is one of growth, dedication, and a commitment to excellence in vehicle maintenance. Since our founding, we’ve worked hard to establish ourselves as Alberta’s go-to quick oil change service. August 1990 : Established as Lube City with two stores in Regina and one in Saskatoon, Saskatchewan.
We specialise in borehole drilling for the agricultural, industrial, domestic and geothermal industries as well as water treatment and distribution. Water Treatment No matter how big or small, M&D Drilling offer tailor made solutions designed to suit your application and budget. No matter what your water source or process we can help.
Water supply work can stall a farm, acreage, commercial site, or oilfield location when the well, pump, or haul plan is not ready. From Strathmore, M & M Drilling Co Ltd handles Water Well Drilling and related water services across Alberta, southwestern Saskatchewan, and southeastern British Columbia.
We drill water wells, install casing, clean wells, and abandon wells when a site needs a proper closeout. Artesian well work is also part of our drilling scope in Wheatland County and the wider service area.
M&M Pumps Inc. adds pump installation and service for the same water system needs. We also handle pressure system work when a well requires dependable delivery after drilling.
Production Testing is available for residential, commercial, and oilfield water applications. Water Hauling and conditioning can be planned around access, timing, and the water demand at the site.
