Drilling Products & Services Companies

Sylvan Lake, AB, CAN

Torque Rathole Drilling Inc provides Rat Hole Drilling, Pile Drivers services to oil and gas operators in Sylvan Lake, AB and across Western Canada.

Energy supply decisions often cross oil, gas, renewables, and power at the same time. TotalEnergies operates from Paris La Défense as an integrated multi-energy company that produces and markets oil, biofuels, natural gas, green gases, renewables, and electricity. Our Production Products & Services profile centers on energy production and marketed energy supply. The portfolio spans liquid fuels, gas, renewable power, and electricity, which gives industrial and energy readers one view of the main production and marketing lines. Construction can be part of new energy capacity. The supplied source notes a 440 MW project in the Philippines reaching financial close and starting construction, which shows active development work in the energy sector. For project, investor, or industrial inquiries, our headquarters contact point in Paris La Défense routes requests by subject so the right energy topic can be handled directly.

Western Canadian gas development depends on large land positions, repeatable wells, and careful cost control. Tourmaline Oil Corp works from Calgary as Canada’s largest natural gas producer, with core operations in the Alberta Deep Basin and NEBC Montney. Our Drilling Products & Services and Production Products & Services profile reflects exploration, development, acquisition, and production in Western Canada. The Alberta Deep Basin position includes 3 million acres, while the NEBC Montney area is described as one of Canada’s largest Montney producer platforms. Natural gas growth needs operating discipline as much as land scale. Tourmaline’s public material points to long-term growth through exploration, development, and acquisition, with operational and cost efficiencies guiding shareholder returns. For oil and gas readers following Canadian natural gas, our Calgary office connects the Deep Basin and Montney asset base with production planning, emergency response, and corporate contact channels.

Bentley, AB, CAN

Frac sand has to move on time, and the trailer choice shapes the rest of the day. TR Transport Inc. runs oilfield transportation from Bentley for sand hauling, tractor service, and flat deck work across Western Canada. Our sand hauling fleet includes 30 ton pneumatic sand trailers, 42 ton hopper bottom units, and 100 ton sand containers. We also move cement, chemicals, and other oilfield materials for field work that depends on clean loading and practical storage on site. With 38 maintained tractor units in the fleet, dispatch can line up the right unit for hauling and equipment movement. TR Transport has operated since 1998, with service centered on Western Canada routes and oilfield logistics.

Calgary, AB, Canada

Trailmaster Off Road Industries Ltd is a Calgary, AB-based provider of Pipe-Bending services.

Saskatoon, SK, Canada

Training or licensing gaps can slow a job before equipment reaches site. Trans Industrial Driver Training handles safety training and driver training from Saskatoon, with courses delivered at our training facility and on-site throughout Western Canada. We train through Trans Industrial Certified Instructors. Our course paths include driver training programs, motorcycle rider training, safety training programs, and licensing information for people who need clear instruction before moving into regulated field or transportation roles. Occupational health and safety training is supported by safety audits and consultations. That gives employers one place to plan training needs, review site expectations, and prepare workers for jobsite rules. Our Saskatoon team can discuss course timing, on-site training needs, and driver training program options for Western Canada clients.

Claresholm, AB, Canada

Trans Source Drilling Ltd is a Drilling-Contractors company based in Claresholm, AB.

Claresholm, AB, Canada

Based in Claresholm, AB, Transprovincial Drilling specializes in Drilling-Contractors.

Calgary, AB, CAN

Trendon Bit Service Ltd provides Bits services to oil and gas operators in Calgary, AB and across Western Canada.

Calgary, AB, CAN

Oil sands drilling around Fort McMurray puts heavy pressure on planning, safety, and rig performance. From Calgary, Treo Drilling Services LP works as a Drilling-Contractor with a modern fleet active in the oil sands and across Western Canada. We built Team Treo around three operating strengths: safety, innovation, and operational efficiency. Those priorities guide how we prepare drilling programs, manage rig activity, and keep field decisions tied to job requirements. Safety Services are part of our drilling model, not a separate afterthought. We use safety training and field practices to support rig operations where changing ground, weather, and schedule demands can affect each shift. Our main service area is Western Canada, with a strong base of activity in the Fort McMurray oil sands. We plan drilling service around the asset, the site conditions, and the performance expected from each rig.

Calgary, AB, Canada

TREQUAL Process Equipment Ltd - supplier for quality process equipment in Canada - Products List Based in Calgary, AB.

Nisku, AB, CAN

Bit choice affects drilling cost, hole progress, and repair planning. Tri-Bit Services Ltd supplies bits from Nisku, Alberta, with a focus on tricone and PDC bits for drilling, HDD, and workover needs. We have specialized in tricone and PDC bits since 1989. As an authorized supplier for Valco Rock Bits, we carry U.S.-made Valco products, including open bearing and sealed bearing bits for drilling applications. Premium rerun milltooth and TCI bits give drilling teams another option when the job needs proven bit inventory without starting from new every time. Our stock includes premium rerun bits across milltooth and TCI cutting structures. Repair and retipping keep bit planning tied to the real condition of the tool. Our Nisku shop can discuss new bits, used bits, PDC repair, and retipping around the drilling interval and the bit style already in service.

Calgary, AB, CAN

In deep and complex Western Canadian wells, pressure-pumping choices affect completion efficiency, stimulation results, and later well intervention. Trican Well Service is a Calgary oilfield services team focused on hydraulic fracturing, cementing, acidizing, coiled tubing, and nitrogen services for oil and gas activity in Western Canada. Our hydraulic fracturing work is tied to completion design and field execution. We match pumping capacity, fluids, and technical planning to the formation and treatment goal. Cementing and acidizing solve different pressure and flow problems. Cementing helps establish isolation during well construction, while acidizing is used when the well or near-wellbore needs a treatment to improve flow. Coiled tubing brings intervention options to long-reach horizontal wells and vertical wells without a full workover rig. Our nitrogen services add lift, displacement, and cleanout capability when the job calls for controlled pressure and fluid movement. Since 1979, Trican has built its service base around Canadian oil and gas fields. Our Calgary team plans pressure-pumping, coiled tubing, and technical solution work around the well program, the location, and the operating window.

Winnipeg, MB, CAN

Selkirk Silica began operations over 50 years ago as a supplier to the foundry, blasting and water filtration industries in Canada. Several years later Trig Industrial was formed to meet the increasing need to supply non-silica and low silica products to sandblasting and surface preparation industries. In 2013 the company was acquired and under new ownership, it expanded into new areas including recreational sands, landscaping and environmental products, as well as abrasive blast equipment. We are certified in accordance with the requirements of the ISO 9001:2015 standard.

Provost, AB, CAN

A stuck fish or a worn bit run can slow a wellsite fast. Trilogy Oilfield in Provost rents downhole tools for drilling and completions. We also support fishing and well abandonment work through our Provost, Weyburn, and Kindersley operating units. We own our tools and track service and repair records for each run. That keeps the rental fleet ready for service rig, coiled tubing, and wireline work. Our inventory includes fishing tools, jars, packers, and drill collars. Magnets, mills, and bits round out the core rental fleet. Trailer-mounted VentureTech and Bowen power swivel packages are available for remedial drilling and fishing operations. We keep the focus on the downhole problem, the well condition, and the run objective.

Calgary, AB, CAN

Bending the possibilities. We have the right equipment and the right people to deliver every time. Based in Calgary, AB.

Richmond, BC, Canada

Responsible development needs field-ready environmental advice, especially when a project crosses land, water, access, or construction constraints. Triton Environmental Consultants Ltd. works from Richmond and offices across Western Canada as an environmental consulting team for development and resource-related projects. We focus on practical environmental solutions with local relevance. Our professional services support planning, assessment, mitigation, and reporting where project activity needs to meet environmental expectations before and during field execution. Pipeline, transportation, reclamation, remediation, and environmental assessment needs can each change the way a site is planned. Triton’s role is to bring the right environmental scope into the project so field decisions, schedule, and compliance needs stay connected. Our Western Canada team is available for project support from early environmental review through field-stage follow-up, with Richmond serving as the local BC contact point.

Grande Prairie, AB, CAN

RB Oilfield Hauling Inc proudly provides winch tractors, pickers, bed trucks, crane rentals, and hotshot trucking to Grande Prairie and across Western Canada.

Calgary, AB, Canada

Triumph Tubular & Supply Ltd is a Oil Country Tubulars company based in Calgary, AB.

Charlie Lake, BC, CAN

Trottier Pipe Handlers provides Pipe-Handling Tools & Equipment services to oil and gas operators in Charlie Lake, BC and across Western Canada.

Edmonton, AB, Canada

Truck Master Manufacturing & Equipment is an Edmonton-based manufacturer of custom truck bodies, tanks, and specialized oilfield service vehicles, including sandblasting rigs, vacuum units, and mechanical service trucks.

Carlyle, SK, Canada

For over 17 years, Gilliss Casing Services has been providing services and equipment to meet the needs of South East Saskatchewan in a timely and safe manner. Certified professionals. Call (306) 634-6768. Located in Estevan, Saskatchewan S4A2H7.

Lanigan, SK, Canada

TSL Mechanical (2019) handles buried utility work and water and sewer repairs around Lanigan, SK. We use hydrovac, excavation, and trenching to open up the site before repair or replacement starts. Our two hydrovacs handle daylighting buried utilities and pothole work for posts. They also support sump cleaning and sewer cleaning. When the job calls for it, we bring them in for pressure testing, grain tank cleaning, and trenching. We also work on water treatment plants and sewage lift stations. We install stainless steel header piping and PVC filter piping after the concrete work is finished. Copper domestic piping and mechanical air venting complete the system at the plant or lift station. When a line fails, we repair water breaks and sewer line breaks. We also replace water main valves and fire hydrants. For new or changed service, we handle house service replacements, septic tank installation, and well line installation. Pitless well installation rounds out the scope when the site needs that connection.

Long open-hole sections can stall before the well reaches target depth. TTS Drilling Solutions works from Leduc, Alberta with drilling products and services built around extended reach downhole tools for oil and gas drilling and casing installation. We design and supply rental tools for drilling operations that need better reach, lower drag, and controlled movement through difficult wellbores. Our XRV tool is tied to improved casing installation using expendable downhole vibratory tools. The main fit is tools-downhole work where the drilling plan needs open-hole reach or casing movement support. Completion products and services are supported when the same tool planning connects the drilled wellbore to the next stage of the operation. Our Leduc team can discuss available rental tools and the drilling operation they need to support before equipment is requested for the next well.

Calgary, AB, Canada

Tucker Wireline Services Canada Inc is a Wireline Services company based in Calgary, AB.

Drilling programs need steady field control when plans change. Twilight Drilling Ltd. works from Nisku as a Drilling-Contractors partner for oil and gas resource extraction, with a personal approach to land drilling service and day-to-day project needs. We keep our drilling decisions close to the field. Our team is built around conscientious service, competent drilling knowledge, and the ability to adapt when a well plan, schedule, or site condition needs attention. Safety is part of how we run the job, not a side note. Our mission includes continual improvement in safety performance with the people working beside us. For drilling conversations in the Nisku area, our administration and operations contacts can connect the project scope with the right internal lead.

Fort St John, BC, CAN

Twylight Pressure Controls Ltd provides Wireline Services services to oil and gas operators in Fort St John, BC and across Western Canada.

Saint-Laurent, QC, Canada

Today, we have nineteen locations in over half a million square feet of building space and more than 400 employees. The Green Line Group consists of three operating divisions; Green Line Hose & Fittings, Green Line Manufacturing, and Pulsar Hydraulics. In Alberta we enjoy partnerships with Hose Headquarters. We are a Canadian owned, privately held company.

Calgary, AB, CAN

A PDC bit has to match the formation, the drilling plan, and the directional target. Ulterra LP works from Calgary with bits and drilling tools for oil and gas directional drilling where high ROP and durability are part of the job. We focus on PDC bit design and drilling support for lateral and directional wells. Our Mitigator technology is built for above-bit drilling problems such as stick-slip and BHA survivability, where vibration can shorten tool life and slow progress. Ulterra began in 2005 with a focus on rapid bit design and responsive manufacturing. We are described on our site as the #1 North American PDC bit provider, with more than 500 employees worldwide and more than 25 global manufacturing and sales sites. From Calgary, our team supports drilling conversations around bit selection, formation response, and downhole tool performance for oilfield and mining applications.

Olds, AB, Canada

Fire extinguishers, emergency lights, masks, and safety gear need to be ready before a site incident. In Olds, Ultimate Safety Alberta Ltd. handles safety training and response products for industrial, construction, and facility workplaces. We inspect fire extinguishers, fire suppression systems, and emergency lighting. That keeps critical response items current for shops, yards, and active project areas. First aid training and mask fit testing are part of the same practical safety setup. Our team trains people for workplace response while supplying protective clothing and safety products for the job. The Olds branch gives central Alberta customers a local safety stop for inspections, training, and product needs tied to active workplaces.

Slave Lake, AB, CAN

Unique Boring provides horizontal directional drilling for pipeline, river, road, and utility crossings plus gravel sales and oilfield services from Slave Lake, Alberta. COR certified, ComplyWorks and ISNetworld member.

Calgary, AB, Canada

Mud separation can decide whether a drilling or cleanup job stays under control. United Oilfield builds high speed, high volume decanting centrifuges in Western Canada for solids-liquid separation in mud, waste control, environmental cleanup, and industrial processing. Our Calgary team works with centrifuges that need more than a quick repair. We inspect the unit, run diagnostics, restore worn parts, and remanufacture components to meet or surpass OEM specifications. When a processing setup needs a different answer, we modify or remanufacture centrifuges around the material, flow rate, and separation goal. That can mean adapting equipment for mud handling, rendering, waste control, or cleanup work where solids need to be removed from liquids with less downtime. We service most makes and models as well as our own centrifuges. Our role is to keep separation equipment working in the shop, in the plant, or behind field operations that depend on controlled fluid and solids management.

Airdrie, AB, CAN

United Oilfield Inc provides Shale Shakers & Screens, Centrifuges services to oil and gas operators in Airdrie, AB and across Western Canada.

Calgary, AB, Canada

Universal Power Solutions provides well servicing and power generation equipment from Calgary, Alberta, supporting oil and gas production operations.

Edmonton, AB, CAN

A failed valve test or trim change can hold up return-to-service plans. In Edmonton, Universe Machine Corporation repairs and modifies valves, performs hydro-testing, and machines large parts for oil, gas, forestry, mining, and heavy industrial assets. We have served heavy industry since 1965. Our shop is an authorized repair and modification center for numerous valve manufacturers, and we can refurbish valves back to OEM specifications. Large and specialized machining equipment lets us take on parts that do not suit small general shops. Welding and fabrication support repair scopes when new material, fit-up, or manufactured components are needed. For valve repair or hydro-testing tied to pressure equipment, our Edmonton team plans around the part condition, test requirement, and return-to-service target. Machine shop and welding capability stay close to the repair path instead of being treated as separate handoffs.

Edmonton, AB, Canada

Large valves and worn heavy-industry parts need a shop that can hold tolerance, repair damage, and test the result before the part goes back into service. Uniwest Machining & Manufacturing Ltd is tied in the source packet to Universe Machine in Edmonton, where heavy-industry machining, welding, hydrotesting, and valve repair have supported customers since 1965. Our strongest source-backed path is the shop route around industrial components. Machining brings the part back to specification, welding and cladding handle repair or build-up needs, and hydrotesting or valve repair helps confirm whether the component is ready for service. For a machining or valve request, the planning points are the component, drawing or tolerance, damage condition, pressure-test need, and whether OEM refurbishing is part of the scope. We keep the path tied to the part that has to return to the field or facility.

Sylvan Lake, AB, Canada

Based in Sylvan Lake, AB, Urban Dirtworks Inc specializes in Directional Drilling-Horizontal Crossings.

Balzac, AB, CAN

Environmental drilling often starts where soil, groundwater, or ground stability must be checked before a project can move forward. Val's Drilling Ltd works from Balzac with Environmental Drilling Contractors service for geotechnical, environmental, exploration, and reclamation drilling. We began with seismic shot hole drilling and later shifted our focus to geo-environmental drilling as field needs changed. That background fits oil and gas, construction, reclamation, and environmental site programs that need boreholes placed with care. Our fleet includes rigs set up for changing ground conditions. ODEX, rock coring, and angle drilling options help us handle tougher drilling locations where access, formation, or sample goals affect the plan. For Balzac-area drilling programs, we match the drilling method to the investigation purpose. Our team handles environmental and geotechnical drilling where the data has to stand up for site planning, reclamation, or exploration decisions.

Mississauga, ON, Canada

We offer diverse vehicle cleaning services, for exteriors & interiors , in a plaza with Petro canada gas station , Valvoline Express Care oil change center , 8 self-service bays , Alpha auto mechanic, and Eggsmart restaurant. Enjoy amenities like free Starbucks Coffee and WiFi in our comfortable waiting area. A one-stop shop for vehicle care, perfect for enjoying breakfast while we service your car. Enjoy environmental benefits, enhanced appearance, and affordable unlimited monthly wash packages for a clean vehicle.

Langley, BC, Canada

Van Ingen Services Ltd provides Pipe-Bending services in Langley, BC.