Cracks and corrosion in pipe, welds, and pressure equipment rarely show on the surface until something fails. At Canada Inspection Associates, we carry out non-destructive inspection that finds those flaws early, working with oil and gas clients out of the Leduc area in Alberta.
Our inspection focuses on checking the integrity of welds, piping, tanks, and structural steel without cutting into or damaging the asset. By testing components in place, we help a facility confirm that its equipment is sound and safe to keep in service, which supports both reliability and regulatory requirements.
We report findings clearly so a site can plan repairs or sign off on a job with confidence. Our inspectors understand the conditions found at wellsites, plants, and fabrication shops, and we schedule around the realities of field work. When a project needs trustworthy results on the condition of critical equipment, we provide the testing and documentation that keep operations moving safely.
Industrial instrumentation keeps site data steady. We represent equipment lines for power transmission, vibration monitoring, and process weighing. Our engineering and consultation support helps match the right solution to the site and the application.
We also handle commissioning and on-site inspections. Calibration and system checks are part of the scope too. We serve oil and gas, mining, and forest sites. Chemical and packaging sites are also in reach. Agriculture, food, and OEM sites are in reach too.
From Edmonton, we help teams with practical guidance for installed equipment. If a specific instrument or system check is needed, we can map the next step.
Cantest Solutions Inc provides Tanks-Testing, Chains, Meters, Pumps, Cathodic Protection, Testing Equipment, Well Inspection, Tanks, Valves, Associations services to oil and gas operators in Airdrie, AB and across Western Canada.
We deliver fast, high-quality maintenance and repair services for complex industrial process infrastructure. Since 1983, HPC Industrial’s innovative, cost-effective service options, our highly experienced technicians and staff, and our commitment to Environmental, Health and Safety processes and practices have made HPC Industrial a preferred choice for leading refineries and petrochemical companies. The success of our industrial leak-sealing services paved the way for innovation and growth into our current set of service lines. As industry demands change, our customers can count on HPC Industrial to innovate.
We serve oil, gas, and agriculture from southwest Saskatchewan. Our team handles oilfield inspection, pressure testing, and quality control for field projects.
We also keep training, dispatch, and safety services close to the job.
From Surrey we make castings and heavy-duty components for oil and gas jobs.
Our shop also makes inserts and nuts for transport use. Winches and anvil components round out our heavy-duty range.
Charter Coating Service (2000) Ltd is most helpful to understand through the job behind parts supply around Calgary, AB. Coating and inspection are treated as related parts of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on.
Our parts supply scope starts with the condition of the asset. It can reduce downtime by finding replacement items quickly. The coating side helps customers connect the request to the job condition and next decision. For customers in Calgary, AB, that means the first call can start with the asset, access point, schedule, or part that actually drives the job.
With inspection, the important details are fit, access, timing, and handoff. It can check condition before the next stage starts. The fabrication side helps customers turn measurements and wear points into buildable parts. The customer can explain what is broken, what has to fit, and what has to move before the request turns into a quote or service plan.
Protective coatings works best when it is tied to the way the job will be installed or repaired. That capability helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
Parts supply can mean different things in a shop, plant, field, or branch setting. Here, the published details connect it to oil and gas. That gives customers a better way to place the service in a real job.
Most industrial calls start with something practical. A part has to be made. A unit has to be checked. A system has to keep running. We frame parts supply with coating so the next step can be tied to the asset, timing, and site condition. In Calgary, AB, that may mean a shop visit, a branch conversation, a field dispatch, or a quote request tied to a real job.
The value is not just in naming parts supply. It is in showing how the scope connects to an asset, location, or schedule. Coating gives the customer another route when the first need changes. The services are expanded into decisions and conditions instead of being left as loose terms.
The final test is whether the path feels clear. Parts supply, coating, inspection and fabrication should point to a real job discussion, not a loose category block. This scope connects to oil and gas. In Calgary, AB, that means connecting the capability to a branch, shop, field, or project decision the customer can act on. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next. If a branch or yard is involved, that context can change the quote path and the schedule. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect parts supply to the equipment, people, and schedule behind the request. Calgary, AB also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When coating enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories. A stronger request usually names the asset, the location, the timing, and the condition that created the need. Those details help show whether the need is a quick supply question or a deeper repair discussion. If the same job moves toward fabrication or inspection, the customer still has a way to keep the conversation connected. Rental planning and field response can also change the schedule when the source evidence supports those capabilities.
Chinook Industrial Ltd gives engineering a practical operating frame around Calgary, AB. Manufacturing and repair planning are treated as related parts of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on.
Our engineering scope starts with the condition of the asset. It can turn requirements into buildable technical choices. The manufacturing side helps customers build equipment around the pressure, fit, and operating need. For customers in Calgary, AB, that means the first call can start with the asset, access point, schedule, or part that actually drives the job.
With repair planning, the important details are fit, access, timing, and handoff. It can find the fault and choose a repair path. The process-equipment care side helps customers keep conveyors and mill assets easier to maintain. The customer can explain what is broken, what has to fit, and what has to move before the request turns into a quote or service plan. Coating works best when it is tied to the way the job will be installed or repaired. It can connect the request to the job condition and next decision. The machining side helps customers bring worn parts back to usable dimensions. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
Engineering changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes maintenance and repair. That keeps the page close to the source facts without drifting into broad claims.
The service conversation should move quickly from label to task. With engineering and manufacturing, that means naming the asset, the failure point, the supply need, or the site condition early. Around Calgary, AB, that keeps the request grounded in the place where the job will actually happen.
The practical benefit is less confusion at the start of the job. When engineering is explained through real use cases, the customer can ask a sharper question about the asset, schedule, or site condition. Manufacturing gives that request a related path when the first issue turns into a part or repair question. Around Calgary, AB, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope.
The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with engineering and then connecting it to manufacturing, repair planning and process-equipment care keeps that conversation anchored. This scope connects to maintenance and repair. Listed as established in 2002, the operation also has a continuity signal for repeat local purchasing. Around Calgary, AB, the scope is tied to what a customer can discuss and the operating setting it fits. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect engineering to the equipment, people, and schedule behind the request. Calgary, AB also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When manufacturing enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories. A stronger request usually names the asset, the location, the timing, and the condition that created the need. Those details help show whether the need is a quick supply question or a deeper repair discussion. If the same job moves toward fabrication or inspection, the customer still has a way to keep the conversation connected.
A weld, casting, vessel, or structural member can look sound and still need test data. CIC Inspection & Consulting Ltd. provides non-destructive testing from Edmonton for oil and gas, construction, and industrial assets across Western Canada.
We support metallurgical lab testing, structural steel inspection, and equipment inspection when the job needs more than a visual check. Our staff includes CWB, CGSB, and AWS certified personnel, with independent laboratories and satellite offices across Canada.
Refractory services are part of our shutdown and turnaround work, where access, heat exposure, and repair timing have to line up before the unit goes back online. Since 1982, we have kept inspection and consulting tied to the condition of the asset and the outage window.
Pipeline construction needs eyes in the field when route conditions, contractor activity, and safety requirements change through the day. CJB Ventures Inc delivers oilfield inspection services and pipeline construction consulting from Lethbridge for oil and gas projects.
We were created to provide construction supervision services to the oil and gas industry. Our inspection team works on pipeline construction projects where field judgment, daily reporting, and ethical conduct are part of the job.
Facility and construction consulting support project owners who need experienced supervision on oilfield scopes. When welding, blasting, fencing, remediation, meters, treaters, or signs are part of the project, we keep those activities tied to the inspection and construction plan rather than treating them as separate stand-alone jobs.
CJB has operated since 2000, with a Lethbridge base for southern Alberta oilfield construction work. Our role is practical field oversight for pipeline and facility projects that need inspection services aligned with construction activity.
Quality Without Compromise About Us Clear Image Inspection Ltd. is an independent Non Destructive Examination company based in central Alberta. We carry out field inspection services of piping welds using radiography, magnetic particle inspection, liquid penetrant inspection and hardness testing.
CMMinspect Inc provides Inspection-Service, Engineers-Mechanical, Inspection Services, Specialty Services, Pumps services to oil and gas operators in Edmonton, AB and across Western Canada.
> About Our Company Superior Trenching Ltd. Your Name Your Number How can we help. has been involved in the Alberta construction industry for 38 years and counting. We are an established, well-respected contractor in the residential and development community with an excellent track record.
With headquarters in Edmonton, a second facility in Red Deer and stocking warehouses in Bonnyville, AB and Grande Prairie, AB , we are strategically positioned to serve our clients efficiently and effectively. Our Edmonton and Red Deer locations house state-of-the-art manufacturing and certification divisions, enabling us to deliver top-notch products and services tailored to meet the diverse needs of our customers. From rigging equipment and accessories to comprehensive inspection, training, and recertification services, we are committed to excellence in every aspect of our business. At Continental Chain & Rigging, we pride ourselves on our dedicated team of professionals whose expertise and enthusiasm drive our success.
Industrial motors rarely fail on a schedule or in a clean shop setting. Continental Electric repairs and rewinds electric motors and generators from Calgary and Edmonton, with field teams available for Alberta and Western Canadian sites.
Our repair path covers high-voltage motor and generator assets, VPI, coil rewinds, bearing replacement, machining, balancing, and final testing. That keeps fault finding and repair planning tied to the same asset instead of splitting the job across several shops.
On-site electrical calls add testing, industrial electrical maintenance, and predictive maintenance for driven machinery in the field. Dry ice cleaning is available when motors or electrical gear need residue removed without water or disassembly.
Motor failure can stop a pump, fan, or compressor with little warning. Continental Electrical Motor Services handles electric motor repair, generator repair, and on-site electrical support from Edmonton and Calgary for industrial sites across Western Canada.
We repair and rewind motors and generators up to 13.8 kV. Shop capabilities include VPI and coil rewinds. We also handle bearing replacement and machining.
On-site testing, vibration analysis, and predictive maintenance help track performance issues before the shutdown grows. Dry ice cleaning removes dirt, oil, and residue from motors and electrical equipment without water or disassembly.
Since 1986, our Edmonton and Calgary teams have kept plant equipment moving for Alberta industry. We also handle new motor sales when a repair is not the right path.
Corrpro provides Pipe-Locating, Pipeline-Leak Detection, Pipeline-Repair, Protective Coatings, Protective Coatings-Inspection, Pig Tracking, Corrosion-Control, Corrosion-Monitoring, Cathodic Protection, Inspection-Pipeline services to oil and gas operators in Edmonton, AB and across Western Canada.
is locally owned Edmonton, Alberta company which provide services to all of Alberta’s overhead crane needs with certified crane technicians. Our overhead crane and hoist services are performed by dedicated personnel devoted to service excellence with a personal touch, and we have provided client’s equipment in safe working order since 1989. Crane Tech Service & Repair Ltd. offers a variety of services available to help maximize the performance of your industrial cranes.
Asset Searches & Process Serving In Wilmington, Delaware Our experience runs deep & our successes are numerous, yet our motivation is simple. In our years of practice the goal has always been to deliver the most effective results for each and every one of our esteemed clients. That core principle is backed by a true commitment to treating clients with the attention and respect they so rightfully deserve. Experience We have more than 20 years of experience in the industry.
Drilling and service rig valve failure can create pressure control risk at the worst time. D Valves Ltd manufactures oil and gas safety valves in Edmonton, including Kelly Cock, Safety, Retrievable IBOP, Float Sub, and Back Pressure Valves.
We build valves for drilling companies, service rig companies, and oilfield equipment companies. Our Edmonton shop also repairs, services, and pressure tests many valve types, including non-OEM valves and gate valves.
Custom manufacturing is available when a standard valve does not match the job. We use design and engineering controls on manufactured products and follow regulatory and industry requirements for quality and service.
Since 1988, our valve manufacturing and pressure testing focus has stayed close to oilfield pressure control. Service rig and drilling customers can plan repair, test, or replacement needs around the valve type and field application.
Exploration and completion programs need test equipment that can move with the well plan. Dark Star Production Testing Ltd. handles production testing and gas well testing from Red Deer for Alberta oil and gas wells.
We have operated in Alberta since 2006. Our field offering is built around well completions, production testing, testing equipment, and the tools needed through different phases of exploration.
Tank capacity is part of the way we plan changing site conditions. Our fleet includes 15 tanks in different sizes, supported by related equipment for oil and gas testing needs.
Pipeline support and pigging are included when they connect to the well testing or flowback scope. We plan each setup around expected fluids, site access, and the information needed from the test.
focused on helping clients improve operations, material handling, maintenance, safety, and compliance. By 2000 it became clear that audits and inspections were not being adequately performed in most organizations and so The Checker was created and quickly became the industry standard for checklist inspection books. In 2010, we saw the opportunity for inspection / audit software and introduced The Checker Software, a powerful tool that enables organizations to develop a comprehensive, systematic audit/inspection program.
When an electric motor stops, a pump, generator, or control system can fall out of service fast. DTR Services repairs electric motors in Lethbridge and keeps generators and pumps turning across Southern Alberta oil and industrial sites.
Seal replacement and vibration checks help identify the fault before a small issue spreads. Our field team also handles programming and technical calls, so the repair stays matched to the motor and controls around it.
Since 2006, we have kept 24/7 emergency response available for urgent motor, generator, and pump calls. Agriculture, manufacturing, and oilfield production sites use that shop route when rotating machinery needs to come back quickly.
E-MAC Corrosion Inc provides Corrosion-Control, Cathodic Protection, Inspection-Pipeline services to oil and gas operators in Edmonton, AB and across Western Canada.
A fleet repair delay can turn one disabled truck into a scheduling problem across the day. ETR Truck and Trailer Repairs handles diesel truck repair in Red Deer for vehicles and trailers that need shop attention before the next job.
We repair heavy-duty trucks, medium-duty trucks, and light-duty units. Trailer, bus, RV, and heavy-equipment jobs can move through the Red Deer shop when a customer needs diagnosis before parts and labour are committed.
Coolant system repair is one published area. Diesel diagnostics, inspections, electrical faults, and mechanical repairs each depend on finding the failed system before the unit returns to duty.
Earl's history in Red Deer dates back to 1985. Repair planning starts with the unit type, fault symptoms, urgency, inspection requirement, and whether the job belongs in the shop or needs mobile help.
Echo NDE starts the job conversation with repair planning around Red Deer, AB. The nearby scope includes pipeline and inspection. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our repair planning scope starts with the condition of the asset. It can find the fault and choose a repair path. The pipeline side helps customers connect the request to the job condition and next decision. For customers in Red Deer, AB, that means fewer vague calls and a better start for quoting or planning.
With inspection, the important details are fit, access, timing, and handoff. That capability helps customers check condition before the next stage starts. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Repair planning can mean different things in a shop, plant, field, or branch setting. Here, the published details connect it to oil and gas and maintenance. That gives customers a better way to place the service in a real job.
The service conversation should move quickly from label to task. With repair planning and pipeline, that means naming the asset, the failure point, the supply need, or the site condition early. Around Red Deer, AB, that keeps the request grounded in the place where the job will actually happen.
The value is not just in naming repair planning. It is in showing how the scope connects to an asset, location, or schedule. Pipeline gives the customer another route when the first need changes. That makes the page more helpful without turning it into a long service series. Planning stays clearer when repair planning remains close to pipeline. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Red Deer, AB sets the local context without turning the description into a street-address block.
The final test is whether the service path feels clear. Repair planning, pipeline and inspection should point to a real job discussion, not a category dump. This scope connects to oil and gas and maintenance. In Red Deer, AB, that means connecting the capability to a branch, shop, field, or project decision the customer can act on. The detail should also help a customer decide what to do next. A person can check whether repair planning belongs in the first call. They can also see when pipeline should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when repair planning remains close to pipeline. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Red Deer, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in pipeline where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether repair planning belongs in the first call. They can also see when pipeline should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in pipeline where it helps clarify the next step. That keeps the path helpful without adding a loose series.
A casing job leaves little room for thread damage, poor torque control, or slow rig-floor response. From Lac La Biche, Edcon Power Tongs & Oilfield Services Ltd runs power tongs for oil and gas casing and tubular running work.
We use integral power tongs and casing running tools on well casing operations. Computer torque monitoring adds a recorded makeup process when connection control is part of the job requirement.
Thread washing and inspection services fit the same casing workflow. Clean, checked threads help reduce avoidable connection issues before tubulars are made up at the wellsite.
Edcon is Alberta owned and focused on the Canadian energy sector. Our service area includes northern and central Alberta field locations such as Cold Lake, Conklin, Fort McMurray, Slave Lake, Medicine Hat, and Wabasca.
EMS Canada Inc provides Pipeline-Contractors, Corrosion-Control, Inspection-Pipe services to oil and gas operators in Crossfield, AB and across Western Canada.
Equipment and trained people for oil and natural gas production and operations. Based in Grande Prairie, Alberta, serving Western Canada including the Montney and Duvernay. Based in Grande Prairie, AB.
Leading environmental management. talk to Ambipar ESG is with Ambipar From management software to Circular Economy, Ambipar has everything your company needs to gain value in the ESG context. Check out our 2022 sustainability report with our advances in the ESG agenda and everything we do to preserve the world, today, and for future generations.
Toxicity questions need test equipment that gives a biological read, not a guess. From Brampton, we supply biotoxicity and mutagenicity test kits through Environmental Bio-Detection Products for environmental labs and spill-response programs.
Our mutagenicity tests come in 96-well and 384-well microplate formats for DNA-damage screening.
We also work with qPCR-based microbial community tools and other molecular biological methods when environmental questions need more than a single endpoint.
EBPI has worked with the US EPA on Gulf of Mexico oil spill projects, and we back our products with application support after purchase.
A wellsite route, creek crossing, or spill area can create environmental risk before construction or cleanup begins. EverGreen Enviro Corp. handles environmental audits, environmental monitoring, reclamation, remediation, and waste management from Carlyle, Saskatchewan for upstream oil and gas work.
We help plan flowline routes, creek crossings, well sites, and access locations on government and private land. That field planning includes forested areas, prairie grasslands, and cultivated land where route choice affects disturbance, approvals, and reclamation needs.
Our environmental testing work includes water well testing and gas migration testing. We also complete impact assessments, site audits, wildlife and vegetation risk evaluations, and environmental site supervision for projects that need field evidence before the next decision.
Spill response and closure work require a practical remediation plan. We develop salt and oil spill remediation programs, supervise field activities, manage drilling waste requirements, and plan reclamation so the site can move toward accepted land condition.
