Production Products & Services Companies

Slave Lake, AB, CAN

Talmek Energy Services LTD. provides Compressors-Repair, Engines-Natural Gas-Repair & Service, and Pumps services in Slave Lake, AB.

Clearwater and Charlie Lake oil development depends on repeatable drilling locations that can hold value across changing oil prices. Tamarack Valley Energy Ltd. is a Calgary-based oil and gas producer focused on responsible, value-driven development in Alberta. Our Production Products & Services profile is built around operated oil development, not outside service supply. We develop long-life resource plays and report operational activity tied to reserves, production momentum, and field execution. Drilling Products & Services applies to our own Alberta drilling inventory. The official project focus names low-risk oil development drilling locations in the Clearwater and Charlie Lake plays, which guides how we plan capital, wells, and production growth. From Calgary, our team manages Tamarack Valley Energy Ltd. production and drilling activity around Alberta oil assets. The core service conversation is resource development in the Clearwater and Charlie Lake plays.

Edmonton, AB, Canada

Septic tanks, cisterns, and wastewater treatment systems need concrete that matches the site and the storage load. Tanks-A-Lot manufactures precast concrete tanks in Edmonton for Alberta and BC projects that need septic, sewage holding, or water storage capacity. We have built tank systems since 1982. Our product line includes septic tanks, sewage holding tanks, and water cisterns. We also build wastewater treatment tanks, catch basins, and sumps. We make 2-piece tanks and modular tank systems that can be used on their own up to 7,500 gallons or clustered to 100,000 gallons. From our Edmonton plant, we supply precast tank systems across Alberta and BC for septic storage and wastewater handling.

Calgary, AB, Canada

Controls, electrical field work, and start-up planning have to connect before an energy project can move from design into operation. Tarco Consulting Inc is a Calgary-based boutique EPC delivering automation control systems, engineering, digital solutions, and E&I field services for energy and industrial sites. We bring more than 25 years of experience to automation, construction, and commissioning work. Our teams plan the control system, electrical and instrumentation scope, field installation, and start-up path as connected project stages. Automation and process control work often sits between engineering intent and operating equipment. We build that bridge with control systems, digital tools, project engineering, and field services for facility, rotating equipment, and turbomachinery applications. Tarco works from Calgary with service reach that includes Red Deer, Houston, and energy-sector project sites. Our project conversations can start at engineering, construction planning, commissioning, or start-up when an automation or E&I scope needs one accountable delivery path.

Calgary, AB, Canada

Downhole intervention work needs tools built for coiled tubing, wireline, snubbing, and completion jobs. Taylor Oil Tool Inc designs and manufactures durable oilfield Tools and Fishing Tools for those applications, with Calgary listed as the Canadian profile location. Our tool line is built for downhole use where fit, durability, and delivery timing affect the job plan. The source evidence states that Taylor Made Oil Tools has rented, sold, and used its tools worldwide. Quality control is part of how we build and release products. We work under a Quality Program aimed at products and services that meet customer requirements and are free from deficiencies. Instrumentation is not the main supported service in the supplied evidence. The supported buying need is oilfield downhole tools for coiled tubing, wireline, snubbing, completion, and fishing situations.

Brooks, AB, CAN

Well testing can lose time when equipment has to be hauled, staged, and tied in before readings begin. TC Mobile Vessels Limited handles mobile production testing and gas well testing from Brooks, Alberta for oilfield sites in Alberta and Saskatchewan. We bring production testing equipment to the wellsite so flow, pressure, and production data can be gathered with less field delay. That service is built for oil and gas wells that need practical test results without adding avoidable trucking or setup steps. Our mobile testing approach is aimed at efficient, cost-controlled field work. We focus on safe production tests that help keep oilfield decisions moving during evaluation, cleanup, and operating checks. For Alberta and Saskatchewan wellsite planning, our Brooks team can discuss mobile production testing needs, field access, and the test setup required for the well.

Airdrie, AB, CAN

A facility startup needs electrical and instrumentation work finished in the right order before control moves to full operation. Techmation Electric & Controls delivers electrical contractors and instrumentation service from Airdrie for commercial, heavy industrial, energy, and oil and gas facilities. Our construction and maintenance teams handle electrical and instrumentation scopes across new builds, operating sites, and facility changes. We also provide 24-hour service for field issues that affect production, control, or safe operation. Commissioning and start-up work is a defined part of our service. We take facilities from substantial completion toward Care, Custody and Control with electrical and instrumentation teams built for systematic checkout and handover. Techmation has delivered value to the oil and gas industry for more than 30 years and was founded in 1995. Our Airdrie team plans construction, maintenance, and commissioning around site access, control requirements, and the operating state of the facility.

Woodbridge, ON, Canada

A calibration bench, control setup, or data system has to produce readings that can be trusted. Technel Engineering Inc works from Woodbridge as a Canadian representative for instrumentation, calibration, and data acquisition lines. We focus on pressure calibration equipment, transducers, barometers, hydraulic control, and electrical calibration standards. These instruments fit measurement jobs where pressure, temperature, or electrical values must be checked and recorded. Custom pressure calibration systems are part of our history. Our first custom pressure calibration bench was commissioned in 1999, and we now build small and large calibration systems around customer measurement needs. For facilities, labs, and technical teams in Canada, our instrumentation line connects measurement hardware with calibration and data acquisition requirements. The Woodbridge office can help define the right setup for a specific test or system.

Edmonton, AB, Canada

Large electric motors drive pumps, fans, compressors, and process equipment where downtime is expensive. From Edmonton, TECO-Westinghouse Motors (Canada) Inc. supplies electric motors and controls for petrochemical, electric utility, water and wastewater, marine, mining, metals, and other industrial facilities. We design and produce motor and control products for heavy-duty electrical applications. In petrochemical and utility settings, that means matching motor performance to the load, environment, and control needs of the asset. Our Canadian head office is in Edmonton, Alberta. The product focus is electric motors and controls, with pumps noted as a related assigned category only where the motor package serves rotating equipment needs. When a plant, utility, mine, or process facility needs electric motors in Edmonton or through Canadian distribution channels, our team can work through product selection and local office coordination.

High River, AB, CAN

Tecumseh Industries Ltd. is dedicated to protecting our planet Based in High River, AB.

Edmonton, AB, Canada

In 2021, we were certified as women-owned and women-led. We are nationally certified through WBENC. Our leadership team and our culture of diversity and inclusion is one of our greatest strengths. Our values pair perfectly with those of our customer base, and we are proud to be reflective of the communities we serve.

Teine Energy Ltd is a privately held Calgary-based oil and gas company focused on the acquisition and development of crude oil assets in Western Canada.

North York, ON, Canada

Ultra-trace mercury analytical equipment manufactured by Tekran Instruments Corporation. All systems use CVAFS detection technology.

Calgary, AB, CAN

Telematic Controls Inc provides Control & Control Systems, Instrumentation, Instrumentation-Process Control services to oil and gas operators in Calgary, AB and across Western Canada.

Grande Prairie, AB, Canada

Field data loses value when it stays trapped at the device. Teleo works from Grande Prairie on automation and instrumentation that connects equipment, telemetry, and software for industrial sites. We connect instrumentation and equipment so live readings can feed predictive maintenance, performance tracking, and resource planning instead of staying isolated at the asset. Our Tresel Gateways give a practical path to real-time telemetry when hardware and software need to work together across demanding site conditions. That structure suits pumping and facility assets that need a clearer operating view from one system.

Montreal, QC, Canada

Manufacturers a unique corrosionmitigation system that has the ability to treat and stop crevice corrosion and pack rust on steel infrastructure.

Calgary, AB, CAN

Onshore Drilling Company | About Precision Drilling Innovating for a Brighter Future High Performance Meets High Value Precision delivers safe and sustainable services and technology to the oil and gas industry. We’ve helped countless customers reduce risks and costs at wellsites across the globe thanks to our Target Zero commitment, industry-leading drilling technology, and a demand for High Performance, High Value in every facet of our work. Our Services Precision creates value for our custome. Based in Calgary, AB.

Calgary, AB, Canada

Resource and industrial facility projects need ground and environmental decisions that hold up in the field. Terracon Geotechnique works from Calgary across Western Canada as environmental engineers, with geotechnical engineering, geological services, and environmental management for resource, industrial, and infrastructure projects. We help project teams understand soil, site, and environmental conditions before they affect design, construction, or compliance planning. Environmental assessment work gives land use, ground conditions, and project risk a clear technical review. Field technologists and professional staff are part of how we deliver practical answers. Our experience reaches across resource-based projects and infrastructure work where safety, quality, and site access shape each stage of the job. For remediation, soil remediation, reclamation, or environmental audit planning, our role is to connect field evidence with engineering judgment. Terracon has served Western Canada projects for over 30 years, with Calgary as a base for regional resource and industrial work.

Calgary, AB, CAN

TestAlta provides Production Testing, Gas Well Testing services to oil and gas operators in Calgary, AB and across Western Canada.

Calgary, AB, Canada

A gas turbine outage can turn a small missing part into a larger production or power problem. Texacana Turbines Inc. supplies gas turbine parts from Calgary and supports field service needs where turbine availability depends on the right component at the right time. We have supplied parts, turbine overhauls, exchanges, and complete turbine packages since 1995. That range helps when a customer needs more than a gasket but does not want every request treated like a new capital project. Fuel control valves and other gas turbine components require source knowledge, inspection judgment, and supplier relationships. Our direct relationships with major component manufacturers help support parts supply and service-industry requests. For turbine work, the planning conversation starts with the unit, failed component, service target, and timing. We can also support consulting as a purchaser, inspector, or project adviser when the request is tied to gas turbines and their applications.

Delta, BC, Canada

Since 1978, as one of Western Canada's largest wire & cable distributors, Texcan offers quality electrical cable products from leading manufacturers.

Stettler, AB, CAN

METALEX. Steel Building Solutions About Products Start Your Project ABOUT METALEX Building infrastructure across Canada and the USA since 2002 OUR STORY Metalex Metal Buildings Inc. is a Canadian manufacturer and builder of metal building systems, headquartered in Stettler, Alberta. Customers come to Metalex when their building scope is on the critical path and needs to be done right. We design, manufacture, and erect self-framing steel buildings, rigid frame structures, and polyurethane insulated panel systems for energy, industrial, agricultural, and commercial projects across Canada and the USA.

Calgary, AB, Canada

When the temperature drops, the liquids inside pipes and vessels can freeze or fall off spec before anyone notices. From Calgary, we run Therminator Heat Trace Systems to keep that from happening on industrial and oilfield sites. We work in electric heat tracing, the systems that wrap pipes, tanks, and process lines to hold them at a steady temperature through an Alberta winter. Our focus is freeze protection and process temperature maintenance for oil and gas, plant, and other industrial facilities where a cold line can shut down production. We have been a Calgary heat tracing company since 2004, and we understand how punishing the climate can be on exposed piping. Our aim is to design and install tracing that performs when it is needed most and keeps your process flowing. If you have lines that need protection this winter, reach out and we can walk through the options.

Gormley, ON, Canada

Thermo Fisher Scientific enables our customers to make the world healthier, cleaner and safer. Delivering technology, pharmaceutical and biotechnology services.

Gormley, ON, Canada

Thermo Fisher Scientific enables our customers to make the world healthier, cleaner and safer. Delivering technology, pharmaceutical and biotechnology services.

Mississauga, ON, Canada

Temperature measurement has to stay accurate in process equipment, hazardous areas, and custody transfer service. Thermo-Kinetics Company Limited manufactures instruments in Mississauga for process control and measurement applications. We design and manufacture thermocouples and RTDs for temperature and process control. Each sensor is built by engineers and technicians using production equipment selected for accuracy and repeatable results. Our instrument work is suited to facilities that need temperature readings tied to control, safety, product quality, or transfer measurement. The Mississauga shop supports clients facing process control and measurement challenges across Canadian industrial operations. Thermo-Kinetics carries CSA approvals for electrical and hazardous environments, along with Industry Canada approval for custody transfer applications. Those approvals matter when the instrument is part of regulated measurement service, hazardous-location equipment, or a process control package that has to meet defined requirements.

Calgary, AB, Canada

We deliver engineered solutions that enhance operational awareness, safety, reliability, and efficiency to deliver the lowest total cost of ownership. Thermon offers over 250 products, software and services across multiple brands, providing a range of offerings from boilers, transportation heaters, and liquid load banks to tubing bundles and heat trace. We are the silent guardians of critical infrastructure. From the relentless demands of chemical plants and the intricate networks of rail and transit to the vital pulse of power generation, we innovate solutions that ensure optimal operation, protect critical assets, and maximize efficiency.

Saskatoon, SK, Canada

Grinding circuits and dewatering systems need process gear that can handle wear, solids, and flow changes. Thurston Machine Inc. in Saskatoon supplies centrifugal pumps and slurry isolation valves for tough process applications. Screening machines and centrifuges round out the plant package when material handling depends on the right machine. Process filters help when waste stream reduction or solids handling needs a different approach. We bring industry knowledge to troubleshooting. Pump and valve issues are matched to the duty instead of guessed at. Screening and filtration needs can be reviewed the same way, with representatives and agents across Canada extending the reach beyond Saskatoon.

Sherwood Park, AB, CAN

Compressor downtime can stop a gas plant or field compression package fast. From Sherwood Park, Tiger Machining repairs natural gas engine and compressor components for natural gas service across Alberta, British Columbia, and Saskatchewan, with repair capability available across Canada. We machine replacement compressor parts from CNC and manual equipment, backed by a large spare-parts inventory and thousands of component drawings. That helps move a failed valve, engine part, or compression component from measurement to repair without starting from a blank page. Our shop handles specialty components, fusion coating, plasma fusion spray, and metallizing for worn or damaged parts. These services help restore fit, surface condition, and service life on equipment used in compression, pumping, and field repair settings. Two field machining trucks work from our Sherwood Park location for site-based repair needs. When a natural gas repair cannot wait for a long shop cycle, we plan the machining path around the part, the package, and the outage window.

Calgary, AB, Canada

Apostolos Kantzas in Calgary, Alberta, PERM Inc. began as a Special Core Analysis and R&D laboratory for the oil and gas industry. Originally located on the University of Calgary campus and known as the Tomographic Imaging and Porous Media Laboratory (TIPM Lab), the company expanded and moved to an off-campus facility in 2012. specializes in Special Core Analysis and Enhanced Oil Recovery studies, offering advanced services such as full-diameter corefloods under high pressure and temperature, and complex relative permeability measurements with integrated scanning.

Edmonton, AB, CAN

Overfill prevention starts before a truck tank leaves the loading site. Titan Logix Corp. designs and manufactures Instrumentation, Gauges, and Fleet Management technology from Edmonton for bulk liquid transportation fleets hauling oil, water, and chemicals. We build mobile liquid measurement solutions for tanks and truck fleets. Our level gauges and data tools help manage product levels, reduce spill risk, and keep liquid hauling information connected to the fleet plan. Bulk liquid Transportation has different measurement demands than a fixed facility tank. A mobile tank gauge has to work with vibration, route changes, loading events, and delivery records while the truck is in service. For more than 25 years, we have focused on advanced measurement solutions for bulk liquid trucking. Our Edmonton team supports tank and fleet projects where liquid level data, overfill prevention, and vehicle tracking need to work together.

Lloydminster, AB, Canada

Well intervention slows down when access, data, purging, and pumping are treated as separate jobs. Titanium Energy Services builds coiled tubing service from Lloydminster around that sequence. We supply E-Coil and wireline for down-hole well intervention and wellbore data. Nitrogen purging and fluid pumping round out the job when gas, liquids, or pressure need to be managed on site. The same crew and equipment also fit pipeline facility services, oil and natural gas exploration, and cavern servicing. Our Lloydminster team matches the tools to the well, facility, or pipeline task.

Calgary, AB, Canada

Heat transfer equipment for steam, hot water, glycol, and hot oil service has to be built for pressure, temperature, and long operating life. TIW Western manufactures heat transfer equipment from Calgary, including steam generators and fired heaters for Western Canadian industrial and energy applications. We support enhanced oil recovery once-through steam generator knowledge, fired heaters, steam and hot-water systems, glycol heating, hot-oil applications, parts, service, emergency support, proposal estimating, and high-temperature fabrication. COR certification and a safety-quality focus are important trust signals for equipment built at this scale. For oil sands, production, facility, and industrial heat-transfer projects, TIW Western's value is specialized manufacturing depth. The service fits customers who need equipment knowledge, parts support, and engineering conversation around demanding thermal applications.

Stettler, AB, Canada

Central Alberta oilfield packages often have to arrive ready for site connection, controls, and measurement. TKS Controls Ltd builds new oil and gas packages in Stettler, including separators and metering packages with instrumentation and electrical prewire options. We started in 1988 as an instrumentation and repair business serving the oil patch in and around Central Alberta. Pneumatic control maintenance and calibration remain part of the base behind our newer package builds. When packages head to site, our electrical and instrumentation scope helps reduce field wiring, control setup, and commissioning gaps.

Fort St John, BC, CAN

Northern piping and valve stations can turn small temperature problems into shutdown work when insulation or heat tracing is wrong. TMI Insulators handles mechanical insulation and heat tracing from Fort St. John for nearby oilfield and industrial sites. We insulate process piping and valves where temperature control affects maintenance access and daily operation. Heat tracing protects exposed lines and equipment when winter conditions put fluid movement or freeze protection at risk. The local service history goes back to 1986 through the supported source context. That history counts on Fort St. John area projects where weather, access, and operating temperature shape the insulation plan. For mechanical insulation or heat tracing, planning starts with the asset, access condition, operating temperature, exposure, and installation window. The job should be shaped around the system before material and crew timing are locked in.

Rocky Mountain House, AB, CAN

TNT Pipeline Services is an innovative alternative resource company, ready to assist you with integrity solutions for pipelines. Based in Rocky Mountain House, AB.

St Albert, AB, CAN

TNT Production Testing Inc provides Production Testing, Gas Well Testing services to oil and gas operators in Sylvan Lake, AB and across Western Canada.

Red Deer, AB, Canada

Field moves in Alberta and British Columbia often need the truck and the equipment in the same plan. Horizon Oilfield Rentals in Red Deer handles oilfield equipment-rental and trucking for jobs where hotshot trucking, winch tractors, and trailer options have to match the site schedule. Flygt and trash pumps handle wet ground, blowdown work, and site water that cannot wait. Flare tanks, fire suppression, and boiler water are part of the same job flow when fluid control and safety are part of the day. Our transportation side runs with highway tractors and light trucks for oilfield trucking across Western Canada. Recovery and blowdown work stay tied to the transport plan so the right unit reaches the right pad or facility without extra handoffs. The Red Deer branch plans rental equipment and trucking around the load, site, and timing for Alberta and British Columbia oilfield jobs.

Edmonton, AB, CAN

A well service crew loses time when a pump, valve, or motor is missing at the wrong moment. Topco Oilsite Products Ltd. keeps oilfield supply moving for drilling, production, and well service work across Western Canada. Pumps and valves handle fluid movement at the jobsite. Electric motors, thread compound, and urethane products cover replacement and maintenance needs in the shop and at the wellsite. We have supplied oilfield consumables since 1976. Our Edmonton counter stays tied to well service products and related construction supply needs in Alberta. When a job needs a matched part family, our team can match the right product to the wellsite, shop, or production application.

Calgary, AB, CAN

Methane can become a site problem during pipeline blowdowns, storage cavern service, and well testing. From Calgary, we build incinerators for oil and gas and waste-management jobs that need clean combustion without flame, smoke, or odor. Our systems are engineered for more than 99% combustion efficiency. That performance helps during pipeline maintenance and workovers when the burn stream has to stay controlled. We also build for energy production and industrial sites where environmental limits and visible impact shape the job. Our Calgary team can size the combustion system around the application and operating window.