Pumps

High River, AB, CAN

Tecumseh Industries Ltd. is dedicated to protecting our planet Based in High River, AB.

Calgary, AB, Canada

A gas turbine outage can turn a small missing part into a larger production or power problem. Texacana Turbines Inc. supplies gas turbine parts from Calgary and supports field service needs where turbine availability depends on the right component at the right time. We have supplied parts, turbine overhauls, exchanges, and complete turbine packages since 1995. That range helps when a customer needs more than a gasket but does not want every request treated like a new capital project. Fuel control valves and other gas turbine components require source knowledge, inspection judgment, and supplier relationships. Our direct relationships with major component manufacturers help support parts supply and service-industry requests. For turbine work, the planning conversation starts with the unit, failed component, service target, and timing. We can also support consulting as a purchaser, inspector, or project adviser when the request is tied to gas turbines and their applications.

Saskatoon, SK, Canada

Grinding circuits and dewatering systems need process gear that can handle wear, solids, and flow changes. Thurston Machine Inc. in Saskatoon supplies centrifugal pumps and slurry isolation valves for tough process applications. Screening machines and centrifuges round out the plant package when material handling depends on the right machine. Process filters help when waste stream reduction or solids handling needs a different approach. We bring industry knowledge to troubleshooting. Pump and valve issues are matched to the duty instead of guessed at. Screening and filtration needs can be reviewed the same way, with representatives and agents across Canada extending the reach beyond Saskatoon.

Red Deer, AB, Canada

Field moves in Alberta and British Columbia often need the truck and the equipment in the same plan. Horizon Oilfield Rentals in Red Deer handles oilfield equipment-rental and trucking for jobs where hotshot trucking, winch tractors, and trailer options have to match the site schedule. Flygt and trash pumps handle wet ground, blowdown work, and site water that cannot wait. Flare tanks, fire suppression, and boiler water are part of the same job flow when fluid control and safety are part of the day. Our transportation side runs with highway tractors and light trucks for oilfield trucking across Western Canada. Recovery and blowdown work stay tied to the transport plan so the right unit reaches the right pad or facility without extra handoffs. The Red Deer branch plans rental equipment and trucking around the load, site, and timing for Alberta and British Columbia oilfield jobs.

Edmonton, AB, CAN

A well service crew loses time when a pump, valve, or motor is missing at the wrong moment. Topco Oilsite Products Ltd. keeps oilfield supply moving for drilling, production, and well service work across Western Canada. Pumps and valves handle fluid movement at the jobsite. Electric motors, thread compound, and urethane products cover replacement and maintenance needs in the shop and at the wellsite. We have supplied oilfield consumables since 1976. Our Edmonton counter stays tied to well service products and related construction supply needs in Alberta. When a job needs a matched part family, our team can match the right product to the wellsite, shop, or production application.

Calgary, AB, Canada

TREQUAL Process Equipment Ltd - supplier for quality process equipment in Canada - Products List Based in Calgary, AB.

Edmonton, AB, Canada

Tri-Alta Oilfield Industries LTD. Tri-Alta Oilfield Industries represents unmatched quality and availability of Electrical Submersible pumps, rods pumps and accessories for the pumping industries. Canadian Owned and operated assembly, testing and warehousing since 1979.

Red Deer, AB, Canada

High-pressure reciprocating pumps depend on fluid end expendables that can take chemical exposure and hard service. Triangle Pump Components Inc. manufactures pump valves, plungers, packing, and stuffing box components from Red Deer for pump users in demanding applications. Our Resista valve is built for acid, hazardous chemicals, chlorine, and small solids under pressures up to 15,000 psi. That capability fits pump work where the valve has to keep sealing through aggressive fluids and abrasive conditions. We also make pump expendables using the same design focus behind our valve and plunger products. The Red Deer shop supports application-specific component choices when a pump package needs the right valve, packing, or stuffing box part. Triangle has been tied to pump component manufacturing since 1919. Our team keeps the conversation centered on the fluid end, the pumped media, the pressure range, and the component life needed for the application.

Edmonton, AB, CAN

Need heavy-duty truck or trailer repair? Truck Zone serves Edmonton, Lloydminster, Bonnyville & Nanaimo with expert diesel service. Call now to schedule. Based in Edmonton, Edmonton, AB.

Calgary, AB, Canada

Wajax will continue to provide the full range of services, expertise, and support that NorthPoint has proudly delivered. You’ll continue working with the same trusted teams, dedicated to providing the quality, reliability, and expertise you’ve come to expect. For questions or additional information, please contact your local representative or [email protected].

Calgary, AB, CAN

Accurate analyzer readings depend on more than the analyzer head. Twister Instrumentation & Process Solutions Inc works from Calgary on instrumentation and custom filtration for Western Canadian process applications where sample systems must keep process fluid steady, clean, and measurable. Our Instrumentation work focuses on analyzer support equipment. Tubing, heaters, filters, pumps, regulators, and related components are selected to condition the sample before it reaches a remotely located analyzer. Process streams can be difficult to sample when pressure, temperature, flow, or contamination changes. We build around the full sample path so plant and facility instruments can measure composition with fewer avoidable interruptions. Many products are kept in stock for off-the-shelf delivery, while custom engineered sample systems are used when the process service needs a more specific arrangement. From Calgary, our team supports instrumentation, meters, heaters, pumps, and sample system needs tied to industrial process measurement across Western Canada.

Nisku, AB, Canada

From small projects to large, we work closely with you and strive to meet your requirements and exceed your expectations, ultimately presenting you with an exceptional product. We Offer A Full Line Of Services to ensure that your equipment is always ready to do the job when you are. Company Mission To deliver exceptional products to our customers in the Industrial Services Equipment market. Why Choose Us Our team is dedicated to producing equipment that can work as hard as your team does.

Nisku, AB, Canada

Discover premier hydraulic services in Edmonton, Canada with us. Our air hydraulics company specializes in hydraulic service, repair, cylinder maintenance, and pumps solutions. Trusted among hydraulic companies for expert air hydraulics.

Edmonton, AB, Canada

Pipe coating failures start with corrosion and wear. Universal Coating Inc. in Edmonton pairs protective coatings with CeRam-Kote pipe coating solutions for oil and gas surfaces that need longer service life. We formed in 1999 to work with industries facing harsh wear and corrosive environments. As the western Canadian distributor of CeRam-Kote products, we connect local coating needs with a wider product line. That fits pipe coating, equipment protection, and industrial surface repair where exposed metal needs a tougher finish. Our Edmonton team keeps the focus on corrosion control for Western Canadian sites.

Mississauga, ON, Canada

We offer diverse vehicle cleaning services, for exteriors & interiors , in a plaza with Petro canada gas station , Valvoline Express Care oil change center , 8 self-service bays , Alpha auto mechanic, and Eggsmart restaurant. Enjoy amenities like free Starbucks Coffee and WiFi in our comfortable waiting area. A one-stop shop for vehicle care, perfect for enjoying breakfast while we service your car. Enjoy environmental benefits, enhanced appearance, and affordable unlimited monthly wash packages for a clean vehicle.

Aurora, ON, Canada

Corrosive liquids and wastewater duties need pumps that match the fluid, flow, and treatment process. From Aurora, Vissers Sales Corp works with heavy duty industrial water pumps and water treatment equipment for chemical, processing, and industrial facilities across Canada and the USA. Our pump selection includes equipment built for harsh liquid handling in chemical and wastewater treatment applications. We pair that pump work with related valves, tanks, mixers, and filtration solutions when the process needs a complete water treatment path. Instrumentation and meters matter when dosing, flow, or treatment performance must be controlled. We source industrial water treatment equipment from established manufacturers and apply it to facility systems that need safe operation and regulatory compliance. Plant upgrades, replacement pump needs, and chemical dosing changes can be planned around the process fluid and operating duty. Our Aurora team focuses on equipment choices that fit industrial water treatment, chemical handling, and processing facility requirements.

Clairmont, AB, Canada

With roots deep in the industry, we’ve cultivated a reputation built on trust and quality. Get to know us and see our dedication in every endeavor. Years Experienced 0 + Over 20 Years of Combined Industry Experience. From Our Family To Your Family Established in 2020 by Cole & Derek Sutherland – Code Rentals is locally owned and operated in Grande Prairie, Alberta.

Calgary, AB, CAN

Warrior Manufacturing Services designs and manufactures oilfield equipment from Calgary, including mud pumps, cementing units, fracturing equipment, and custom-built drilling and completions tools for operators worldwide.

Toronto, ON, Canada

Municipal, construction, and industrial jobs need pump packages matched to the fluid being moved. Wastecorp Pumps Inc. manufactures fluid-handling pumps in Toronto for government agencies and construction professionals. We build diaphragm and double disc pumps for different pumping duties. Trash and dry prime pumps cover other transfer needs. Plunger pumps sit beside vacuum pumps when cleanup or transfer jobs need a different package. Vacuum trailers and vacuum trucks add mobile handling options. Sewer jetting systems and pump parts cover maintenance or cleaning needs. Marine pumps extend the range for water applications. Water trailers are built for on-site water delivery, dust control on construction sites, and heavy equipment washing.

Estevan, SK, Canada

Pump trouble at a wellsite needs the right technical handoff before field time is lost. Weatherford Canada LTD supports pump-related oil and gas work from Estevan, Saskatchewan. Our contact point keeps requests close to the right Weatherford team when the job starts with production equipment condition, site timing, or a pump issue. Wireline and inspection jobs can follow the same direct handoff. For southeast Saskatchewan operations, the Estevan location gives oil and gas teams a Weatherford contact for wellsite work tied to production systems.

Calgary, AB, CAN

Weatherford Canada Partnership in Calgary connects drilling, evaluation, completion, and production activity through a global energy-services platform. We keep the Canadian office tied to field execution while the wider Weatherford network adds digital tools for planning and performance. On the well-construction side, we handle directional, horizontal, and underbalanced drilling. Cementing gear and drill-collar rental fit the same downhole phase. Wireline and logging help move the well into evaluation. Production testing, flow measurement, completion tools, and packers carry the job toward producing assets. Sand control, plunger lift, pump systems, wellhead hardware, and pipeline testing give mature wells and surface lines another practical path when conditions change.

Calgary, AB, Canada

As a key contributor to the Canadian economy and its subsequent prosperity, we’re excited by the challenges and opportunities ahead. Thank you to our incredible clients and partners. YEARS' PROCESS SOLUTIONS SQUARE FOOT FACILITY SQUARE FOOT SERVICE CENTRE Located in Calgary, Alberta, Canada, a short drive from the beautiful Rocky Mountains, Welco offers a centralized location for supply and service to clients across Western Canada. With Technical Solutions Specialists in British Columbia, Alberta, Saskatchewan and Manitoba, Welco is able to provide fast, efficient and cost-effective process solutions for industrial mixing, moving and pumping applications.

Edmonton, AB, Canada

When an industrial engine part is worn beyond a simple swap, the repair moves into measurement, machining, and rebuild planning. Weldangrind Ltd operates an Edmonton engine machine shop for Engines-Diesel & Gas-Repair & Service, including industrial engine repair and rebuild work. We have been rebuilding and repairing engines in Edmonton since 1960. Our technicians work on engine blocks, cylinder heads, crankshafts, connecting rods, camshafts, and pump-related components for gas, diesel, and compression applications. A crankshaft, cylinder head, or block problem can affect a truck, construction unit, compression package, or heavy-duty machine in different ways. Our shop capability lets us match the repair to the part condition instead of treating every engine issue as a replacement job. The Weldangrind Group also added DK Machine and Diesel Component Rebuilders, expanding crankshaft rebuilding and cylinder head rebuilding capability. Our Edmonton team is built for one-of-a-kind engine machining needs where the part, tolerance, and operating duty have to be considered together.

Calgary, AB, CAN

Rotating equipment selection affects flow, uptime, maintenance access, and package reliability in industrial and energy facilities. Westcomm Pump & Equipment supplies engineered pump and rotating-equipment packages from Calgary, with additional branch coverage in Edmonton and Vancouver. Westcomm works with ANSI and API pump applications, centrifugal and AODD pumps, rotary gear and progressive cavity designs, reciprocating units, air compressors, agitators, and mixers. The service model extends beyond distribution into engineering, packaging, servicing, rentals, and training, giving facility maintenance planners a path from product selection through support after installation. Founded in 1997, Westcomm has represented pump equipment in carbon capture, water and wastewater, and industrial markets. For oil and gas facilities, carbon capture projects, process plants, and utility systems, contact Westcomm about the pump package needed for the application.

Calgary, AB, CAN

Western Pump provides Pumps, Pumps-Submersible, Sewage-Treatment, Camps-Manufacturing services to oil and gas operators in Calgary, AB and across Western Canada.

Calgary, AB, Canada

Western Technical Systems provides HVAC, refrigeration, and mechanical services from Calgary. They support oil and gas facilities with heating, cooling, pump systems, and building mechanical infrastructure.

Edmonton, AB, CAN

Industrial parts can lose performance when residue stays in ports, screens, threads, or small passages. Western Ultrasonics cleans parts in Edmonton with ultrasonic cleaning services and sells CSA certified ultrasonic cleaners for shop and plant use. We work with filters, tools, pumps, valves, dies, chains, and other components that need controlled cleaning without aggressive manual scraping. Ultrasonic energy reaches small surfaces and hidden areas that are hard to clean by hand. For more than 25 years, we have supplied industrial and commercial ultrasonic cleaning equipment in Canada. Our product line includes custom industrial cleaners, tabletop cleaners, transducer packs, generators, and cleaning chemicals. Repair is part of the same lifecycle. We service ultrasonic machines, parts, transducers, and generators so cleaning systems can stay in use at the shop or facility. Our Edmonton team can help match the cleaning method, equipment size, and chemistry to the part condition and production need.

Calgary, AB, Canada

A pump train failure can stop a plant, delay commissioning, or push maintenance cost into the next shift. Westpower works from Calgary and Edmonton on pumps and rotating equipment for industrial and pipeline facilities, with millwright and mechanical repair capacity around that core need. Our strongest source-backed path follows rotating equipment through its life cycle. Selection and installation planning help before start-up, while repair, maintenance, optimization, and upgrades help keep pumps and mixers aligned with process demand. For a Westpower request, the planning points are asset type, failure mode, site location, lifecycle stage, and whether the job needs shop repair or field activity. We keep the pump conversation tied to the operating problem instead of a general parts list.

Acheson, AB, CAN

Remote power and site equipment need to match the load, runtime, and field conditions before they leave the shop. From Acheson, Alberta, Westquip Diesel Sales works with diesel engines and gas-powered generator sets for industrial sites across Western Canada. We distribute diesel engines and engine power units, then build Westquip-branded generator sets for power generation needs. Natural gas powered generator sets are part of that same equipment family when a site calls for gas fuel instead of diesel. Water pumps and light towers round out the field equipment we manufacture. These products serve construction, industrial, and energy sites that need pumping capacity, temporary lighting, or engine-driven power in one equipment plan. Westquip has operated since 1981 as an industrial diesel engine sales centre and power generation manufacturer. Our Acheson facility handles diesel engine sales, power units, generator sets, water pumps, and light towers with Western Canadian service needs in view.

Calgary, AB, CAN

WestRon Pumps, Compressors & Blowers/Vacuum provides Pumps, Compressors-Gas Sales services to oil and gas operators in Calgary, AB and across Western Canada.

Nisku, AB, Canada

CVS Controls Ltd has decades of experience and is led by three core principles: customer service, being capable and diverse and providing a quality product at a competitive price. Our solid growth has come from ensuring that our products are completely interchangeable with the industry’s leading brands and manufactured to strict quality control standards. Applications serviced by CVS Controls Ltd include Oil & Gas, Petrochemical, HVAC, Mining and Pulp & Paper. CVS Controls Ltd is certified and registered ISO 9001:2015 manufacturing facility with our head office located in Nisku, Alberta, Canada.

Edmonton, AB, Canada

A building envelope failure can affect heat, air, moisture, light, sound, and long-term facility performance. Williams Engineering Canada works from Edmonton on consulting engineering for new construction and existing buildings in property, social infrastructure, and energy, resources, and industry sectors. Our Edmonton team focuses on the design, construction, and performance of the building envelope. That includes practical engineering decisions for controlled environments, building durability, and infrastructure that has to perform through Alberta operating conditions. Construction planning is stronger when design intent, existing conditions, and performance targets are checked together. We work with owners, developers, designers, and builders on infrastructure where envelope systems must protect the asset and support efficient operation. Sustainable infrastructure is part of the project requirement for many industrial and public assets. Our engineering work connects resource-efficient design with the mechanical and construction realities of buildings that must stay serviceable over time.

Calgary, AB, Canada

Measurement problems can throw off chemical feed, valve response, and pump control in a plant or utility system. WJF Instrumentation Ltd. works from Calgary on analytical and process control instrumentation for industrial facilities across Western Canada. We help with instrumentation selection, recommendations, repair, troubleshooting, startup, and hands-on training. Our service experience covers water treatment, chemical manufacturing, power generation, pulp and paper, and similar process industries. A common water treatment application is chlorine analysis tied to valve and pump adjustment through a chemical feed pump. That kind of control loop is where instruments, meters, valves, and pumps need to work together instead of being treated as separate parts. Calgary stock helps us replace consumable items and respond to new measurement applications without starting every job from scratch. Our instrumentation team serves Western Canada, including British Columbia, Alberta, Saskatchewan, and Manitoba.

Brooks, AB, Canada

A wellsite or pipeline job can change quickly when fluids, pressure, cleanup, and safety all land in the same field window. Xtreme Oilfield Technology works across Western Canada with pressure trucks and vacuum trucks for Alberta and British Columbia oilfield sites. Our field package is strongest where one job needs more than one unit. Combination units, flushby units, and rental gear can be planned alongside pipeline pigging, hydrotesting, tank cleaning, well cleanouts, and sand cleanup. For Xtreme dispatch planning, the key variables are site location, pressure need, fluid volume, pipeline or wellsite scope, tank requirement, and safety coverage. We keep the field plan tied to the equipment that has to be on location.

Medicine Hat, AB, Canada

Oilfield maintenance gets harder when pressure trucks, vacuum trucks, safety coverage, rentals, and cleanup have to be coordinated separately. At Xtreme Oilfield Technology, we simplify that planning from St. Paul, Alberta with oilfield maintenance equipment for pipeline work, well servicing, tank cleaning, fluid handling, and turnaround projects across Western Canada. More than two decades in operation gives us practical experience on jobs where timing, safety, and site readiness are not optional. A project may start with fluid movement, then shift into tank cleaning, pigging support, hydrotesting, confined-space entry, spill cleanup, or well cleanout work. We are set up for those overlapping oilfield needs. Our equipment includes pressure trucks, vacuum trucks, flushby units, coil tubing, combination units, rental equipment, and tank-cleaning tools. Instead of coordinating disconnected vendors for related oilfield tasks, clients can work with one regional team for maintenance, cleanup, testing, and wellsite service requirements.

Calgary, AB, CAN

A process plant slows down when a mixer, pump, or heat exchanger has to wait on the right documents. At Zazula Process Equipment in Calgary, we repair mechanical mixers, gear boxes, vacuum pumps, blowers, and chemical injection pumps from the same shop. Our team keeps manuals, engineering documents, and schematics on hand, which helps the repair move from diagnosis to parts planning. Mechanical mixers, static inline mixers, metering pumps, vacuum pumps, injection quills, and heat exchangers fit the water and wastewater side. We also do custom fabrication with welding procedures from carbon steel to super nickel alloys. That gives process jobs a shop path when chemical, heat, or corrosion demands shape the build.

Calgary, AB, CAN

ZIRCO Ltd. provides innovative industrial accessories and environmental solutions for Oil & Gas, Landfill, Wastewater Treatment, and industrial applications across Western Canada. Based in Calgary, AB.