Specialty Services Companies

Stephenville, NL, Canada

EFCO Enterprises LTD General Contractor Electrical Services Stephenville Based in Stephenville, NL.

Nisku, AB, CAN

Leading specialist in sealing applications and their market, Freudenberg Sealing Technologies supplies and develops as a service partner serving customers in a wide variety of industries. Contact us for the right sealing application now. Based in Nisku, AB.

Elk Point, AB, CAN

Frog Lake Oilfield Services provides Insulation and Steam Cleaning services in Elk Point, AB.

Rimbey, AB, CAN

Frontier Construction Prod Ltd is a Rimbey, AB-based provider of Steam Cleaning services.

Nisku, AB, Canada

Frontier Mechanical Services Inc supports jobs that do not fit neatly into one trade box. When equipment needs design help, a fabricated part, or a field repair, we pull the mechanical side, the shop side, and the service side into the same conversation. In Nisku, that shows up when downtime is expensive and the first answer has to lead to a real repair path. Our work is built to keep the job tied to the asset, the site condition, and the next step, not to a loose service label. That is the difference between a long handoff and a workable scope. A lot of our work starts with hydraulic systems. We handle initial design and troubleshooting. We also handle repair and installation of hydraulic systems and related components. That gives us a way to deal with the fault itself, not just the symptom that showed up downstream. When the system has to move, hold pressure, or respond on command, the job depends on a repair path that makes the equipment easier to install, easier to service, and easier to bring back into use. Hydraulic work often decides whether a machine sits idle or gets back into the cycle cleanly. Fabrication is where a worn part becomes something practical again. We support welding and fabrication. We also handle machining and manufacturing so components can be repaired, modified, or built to suit the job. Those steps matter when fit, tolerance, and finish affect the result. A quick patch is not enough on parts that have to tie in cleanly or survive repeated service. Pipeline work and pressure equipment add another layer of care, because the part has to suit the system and the operating condition, not just the shape of the old piece. Our electrical, instrumentation, and automation work keeps the control side connected to the mechanical side. Power, signals, and control logic do not help if the equipment cannot be installed or troubleshot without creating a second problem. We use those capabilities to support systems that depend on reliable field connection and clear diagnostics. That can reduce the gap between a mechanical repair and the controls work that follows it. It also gives our team a better way to trace a problem when the fault lives in more than one place. Parts supply is part of the service here, not an afterthought. We support pumps and motors. We also work on valves, cylinders, and other industrial equipment and machinery, including all brands where the fit and application make sense. That shows up when a repair stalls because someone is still hunting for the right component. With the parts side in the same conversation, the job can move from failed part to replacement, rebuild, or installation with fewer stops. The schedule gets easier to manage when the part, the repair plan, and the final install all stay lined up. We also work in the setting that makes the most sense for the job. Some repairs belong in the shop, while others need to happen on site with mobile service. In-house and on-site capability lets us choose the place that fits the access, the deadline, and the asset condition. That shows up on field equipment, plant equipment, and custom-built components because the best fix is not always the one that starts in the same place. A job can begin with diagnosis in the shop and still end with a field installation when that is the cleaner path. The Frontier Mechanical approach is built to keep the job connected. Design work stays tied to troubleshooting and repair. Installation stays tied to fabrication and machining. Parts supply stays in the same path as the repair plan. Our team can follow the scope from the first look at the fault to the final install, which helps keep the next decision practical. Project management helps keep each step in sequence when the job moves between shop, site, and supplier. For oilfield and industrial work around Nisku, that means one shop conversation can cover the mechanical problem, the part, and the field result that has to happen next. When the job starts with a worn component or a hydraulic issue, we can map it to the repair, build, or installation that gets the system back to work.

Red Deer, AB, Canada

Well integrity issues can shut in production and complicate abandonment plans. Performance Energy Services handles remedial cementing and well servicing for oilfield wells across Alberta and Saskatchewan. We focus on cement placement jobs that correct isolation, seal problem intervals, and set up the next field step. Our field planning centers on pressure control, pumping requirements, and site access for active wells and legacy wells alike. From Alberta, we plan remedial cementing scopes around Western Canada well conditions.

Donalda, AB, Canada

Full Circle Plastics transforms recycled materials into sustainable products for your projects. Help us build a greener future with innovative plastic solutions!

Red Deer, AB, Canada

Futura Signs is a Red Deer, AB-based provider of Signs services.

Wetaskiwin, AB, CAN

About - G&B Rubber Products (1998) Ltd Skip to main content We are a locally owned and operated production facility located in Wetaskiwin, Alberta, and 80 kilometers south of Edmonton. For over the past 50 years we have manufacturered rubber products and components for oilfield and industrial use. We produce in many different types of elastometers such as Aflas, HNBR/HSN NBR, Natural, Neoprene, Urethane and Viton . Based in Wetaskiwin, AB.

Grande Prairie, AB, Canada

G & L Heating Cooling in Hartselle, AL is your licensed HVAC professional delivering residential and commercial services. Call (256) 773-2997.

Fort Nelson, BC, Canada

Bumper to Bumper Store in Fort Nelson, BC. Auto Parts Store Near Me Français Visit the Bumper to Bumper website Store details Auto Parts Near Me Bumper to Bumper - G. Wide selection of quality parts – Find exactly what you need. We have an extensive inventory of high-quality auto parts and accessories. Whether you need replacement parts or upgrades, we have the parts you need to keep your vehicle running smoothly.

Lloydminster, AB, Canada

G Force Diesel Service repairs heavy-duty trucks at our Lloydminster and Estevan shops. We keep the diesel side practical for construction units, oilfield haulers, and transportation fleets that need shop time before returning to the road. We handle diesel maintenance, engine repair, and CVIP inspections for commercial vehicles. Certified mechanics check the truck for road safety, then correct the mechanical faults that can stop a haul or field day. The two-shop footprint keeps diesel repair and inspection capacity close to border-region trucking routes and oilfield haulers.

Bonnyville, AB, CAN

Turnaround cleaning can stall a site when confined spaces, wash water, and access controls are left until the last minute. GForce Oilfield Services Inc works north of Bonnyville with vacuum truck service and high pressure cleaning for oilfield and industrial sites that need the cleaning plan shaped before activity begins. We began as Gervais Trucking in 1992 and became GForce in 2004. In 2012, our team moved deeper into high pressure cleaning, giving oilfield and industrial customers a stronger path for wash jobs tied to access, safety, and turnaround timing. Confined-space cleaning needs trained people and a clean sequence. Vacuum truck capacity can be coordinated with high pressure water cleaning and trucking around the material, entry conditions, disposal needs, and field controls. Our Bonnyville field response is built for cleaning scopes where downtime, site access, and wash water handling affect the day. The right plan starts with the space, the residue, the access point, and the service window.

Wanham, AB, Canada

G M Sallis Steaming is a Wanham, AB-based provider of Steam Cleaning services.

Grande Prairie, AB, Canada

GP Backhoe Services provides backhoe, excavating, and well abandonment services from Grande Prairie, Alberta, supporting oilfield operators in the Peace Country.

Airdrie, AB, Canada

Garry's Heating Services is a Airdrie, AB-based provider of Battery-Operating services.

Calgary, AB, CAN

Enerflex enhances productivity and profitability through tailored services, addressing customer needs with expert solutions. Based in Calgary, AB.

Calgary, AB, CAN

A gas processing project can drift quickly when scope, approvals, equipment sizing, and construction support are handled as separate problems. Gas Liquids Engineering works from Calgary with EPCM and project engineering for oil and gas facilities that need technical control from concept through execution. We bring engineering, drafting, procurement, construction management, and regulatory planning into one project path. That structure helps when refrigeration, CO2 handling, gas treating, liquids fractionation, or acid gas injection changes affect more than one part of a facility. Small projects are a defined part of our service model. Debottlenecking, upgrades, and field changes need the same discipline as larger EPCM work because a small facility change can still affect permits, tie-ins, operating limits, and schedule. With 225 engineers, designers, consultants, and administrators serving Canadian and international markets, our Calgary team can move oil, gas, hydrogen, power, and carbon reduction projects from early scope into practical execution support.

Burlington, ON, Canada

In Burlington, we keep refrigeration and process technology moving for food, beverage, and pharmaceutical plants. GEA Process Technology Canada Inc works on the machinery behind those lines when stable cooling and reliable process equipment matter. Our GEA InsightPartner Blu-Red Care service uses machine data and refrigeration expertise to watch condition changes and obsolescence reporting. Remote support and service agreements help maintenance planners see what needs attention next. We also cover automation around milk reception through finished product, along with the components tied to that workflow. That keeps the Burlington branch close to the same production stream from intake to output.

Salmon Arm, BC, Canada

Leading Generator Sales, Service, Maintenance in Ontario +1-705-653-1116 About Us Geco has been in the generator business since 1999. When we first opened, we were just a small two-person operation that installed generators. Since then, we have expanded our team, as well as the services we offer. These services include generator maintenance and diagnostics, warranty work, ordering parts and accessories for the DIYers, while also continuing to install new generators and much more.

Edmonton, AB, Canada

Crane-equipped service bodies have to carry tools, parts, and lift gear without wasting bed space. General Body & Equipment Ltd. builds custom truck bodies and crane-equipped work trucks in Edmonton for Western Canadian fleets. We build mechanic bodies and lube trucks around how the unit will load and reach the jobsite. Crane decks and specialty oilfield trailers are built through the same design and fabrication path. Our shop also handles repair, warranty parts, and custom fabrications when a standard body will not match the route or load. That keeps the build, service, and parts side under one roof for field trucks.

Red Deer County, AB, CAN

General Oilfield Services Inc is an energy industry service provider based in Red Deer County, AB. Contact them for reliable oilfield services and solutions.

Calgary, AB, Canada

Heavy crude loses value when the stream is hard to upgrade. Genoil Inc. develops oil and gas technology in Calgary for heavy-oil upgrading, petroleum engineering, and oily water separation. Our GHU technology history started in 1998 under Canadian Environmental Equipment and Engineering Technologies Inc. That development path sits behind the upgrader and environmental line. Genoil also describes low-cost environmental solutions for diesel shortages and product inventory gaps. From Calgary, we keep the focus on upgrading capacity, separator needs, and making more transportation fuel from existing crude volumes.

Red Deer, AB, Canada

Cold field conditions and heavy fluids put pressure on heating and pumping packages. In Red Deer, GenTex Industries Inc builds hot oil units and heaters for oilfield jobs that need controlled heat, fluid movement, and long service life. We design and build oilfield heating systems for real field use. Pumping and fluid-transfer packages sit beside that work, with pressure trucks and custom builds available when a standard unit does not fit the job. High- and low-pressure heating units are available from 2.5M Btu up to 21M Btu. That range gives us room to match heater capacity to demanding field conditions without guessing at the duty cycle. Testing, inspections, maintenance, and long-term support keep GenTex units working after delivery. Our Red Deer team can discuss a new build, support need, or heating application tied to field conditions.

Dartmouth, NS, Canada

Canada’s governments depend on geoscience to inform policy, man Based in Dartmouth, NS.

Waterloo, ON, Canada

50+ YEARS OF POSITIVE REVIEWS IN KITCHENER WATERLOO 255+ YEARS OF COMBINED EXPERIENCE Affordable HVAC Service & Installations Our approach has always been to listen first. Fully understanding your needs makes it simple to develop practical and cost effective solutions. GET A FREE QUOTE On a budget. We have a financing option to match.

Trochu, AB, Canada

George Adams Trucking provides Trucks-Tank services in Trochu, AB.

Calgary, AB, Canada

​GeoTrek is a full service engineering, geomatics and geotechnical company operating in Alberta. Based in Calgary, AB.

Edson, AB, Canada

Gering Gravel Sales offers multiple aggregate products and hauling services to the Edson area with over 43 years of experience. 24/7 Answering Service.

East Coulee, AB, Canada

Gerlinger Bros Oilfield Svc is a Trucks-Vacuum company based in East Coulee, AB.

Strathmore, AB, CAN

SafeBlu, formerly Get Real Testing, has been a trusted provider of fire safety services in Strathmore and Calgary since 2003. They offer fire extinguisher inspection, fire suppression systems, drug and alcohol testing, and safety services for the oil and gas industry.

Red Deer, AB, Canada

GFI Systems Inc. gives customers a clearer starting point for repair planning around Red Deer, AB. The nearby scope includes fleet management and trucking. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make. Our repair planning scope starts with the condition of the asset. It can find the fault and choose a repair path. The fleet management side helps customers connect the request to the job condition and next decision. For customers in Red Deer, AB, that means fewer vague calls and a better start for quoting or planning. With trucking, the important details are fit, access, timing, and handoff. That capability helps customers connect the request to the job condition and next decision. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Repair planning changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes oil and gas and maintenance. That keeps the page close to the source facts without drifting into broad claims. Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect repair planning with fleet management so the request can move from a rough need into a clearer service discussion around Red Deer, AB. The practical benefit is less confusion at the start of the job. When repair planning is explained through real use cases, the customer can ask a sharper question and avoid sending the request to the wrong place. Fleet management gives that request a related path when the first issue turns into a part or repair question. Around Red Deer, AB, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in fleet management where it helps clarify the next step. That keeps the path helpful without adding a loose series. The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with repair planning and then connecting it to fleet management and trucking keeps that conversation anchored. This scope connects to oil and gas and maintenance. Listed as established in 1992, the operation also has a continuity signal for repeat local purchasing. Around Red Deer, AB, we describe the scope a customer can discuss and the operating setting it fits. Planning stays clearer when repair planning remains close to fleet management. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Red Deer, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in fleet management where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether repair planning belongs in the first call. They can also see when fleet management should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when repair planning remains close to fleet management. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Red Deer, AB sets the local context without turning the description into a street-address block.

Sherwood Park, AB, CAN

Industrial waste and soil issues need a disposal path that can handle solids, liquids, and contaminated material without splitting the job into separate plans. From Sherwood Park, GFL Edmonton connects local service needs to GFL Environmental's North American waste management and environmental services network. We handle solid waste management, liquid waste management, and soil remediation for industrial, commercial, infrastructure, and community settings. For oil and gas facilities, that scope can support waste handling, disposal planning, and environmental cleanup tied to tanks, yards, plants, and field locations. Our services also include industrial service capacity backed by a large fleet of trucks and equipment. The same operating base supports vacuum truck needs, oil spill clean-up, remediation, and contaminated soils handling where those services are available through the local branch. GFL operates across Canada and the United States. Our Edmonton-area team is part of that wider service network for customers who need waste management and environmental field support around Sherwood Park and nearby industrial corridors.

Stettler, AB, Canada

Recognized by our signature fleet of bright green trucks and equipment, we offer a wide range of environmental and industrial services to businesses, communities and households, providing a consolidated and sophisticated approach to meeting our customers’ needs. We believe that, by providing safe, accessible and cost-effective solutions, we encourage greater environmental responsibility and allow our customers and the communities we serve to be Green For Life. We recognize that our customers rely on us to provide viable alternatives to more traditional waste management options, including solutions that help them meet their own sustainability goals. GFL’s safety culture, ‘Safe For Life’, reflects our ongoing pledge to the health and safety of every worker, subcontractor, visitor, and member.

Fort St John, BC, CAN

A casing job can lose time when the connection is dirty, the torque record is unclear, or the tong fleet is not ready. Giant Power Tongs works from Fort St. John on casing services for oil and gas activity in northeastern British Columbia and northern Alberta. Our field path covers tubular running, threadwashing, computer torque monitoring, and thread inspection. Those services keep the casing workflow focused on connection condition, make-up control, and the next joint in the string. Giant Power Tongs operates as a division of Stuart Wood Ventures Ltd. and has served the region since 2008. The public site lists six tong trucks for field work, giving the operation a defined service fleet rather than a vague gear claim. Safety and compliance appear in the structured fields where they belong. The public profile keeps the selling story centered on casing service, tubular running, and Fort St. John field coverage.

Calgary, AB, CAN

Gibson Energy provides Mud Additives, Paraffin Control, Crude-Transporters, Hazardous Goods-Sealed Sour Oil Transportation, Waste Management, Completion Services, Trucks-Tank services to oil and gas operators in Calgary, AB and across Western Canada.

Grande Prairie, AB, Canada

CNC plasma cutting is the main shop service behind our signs and fabrication pieces in the County of Grande Prairie. Gizmo's Welding Ltd works with design and cutting needs for business signage, custom decorative signs, personalized pieces, and production runs. A sign project often needs clean layout, repeatable cutting, and metal that matches the final use. We handle in-house design and cutting so custom signs and shop-cut parts can move from idea to finished metal with fewer handoffs. Our welding background also supports cutting for fabrication projects. When a local shop, contractor, or industrial customer needs plate parts or custom metal shapes cut for the next build, we can quote CNC plasma cutting based on the part and production need. Grande Prairie-area customers use our signs and cutting service for one-off pieces and repeat runs where shape, finish, and turnaround need to be planned together.

Calgary, AB, CAN

Pressure control parts have to match the wellsite job and the test requirement before they go back into service. GKD Industries Ltd. machines wireline equipment in Calgary for oil and gas pressure work. Our shop also builds hammer unions and valves for flow control work. When a standard part does not match the connection or the repair scope, we machine the component here. Testing is part of the path. We perform hydrostatic pressure testing and hardness testing. Magnetic particle testing, ultrasonic thickness testing, and surface finish checks round out the inspection path. From our Calgary machine shop, we handle well stimulation and slickline pressure control equipment with the drawing, dimensions, and test requirements already defined.

Edmonton, AB, CAN

Forum Energy Technologies’ GHT coolers and industrial radiators are built for high ambient temperatures, extreme conditions, and mission‑critical cooling applications across global markets. Based in Edmonton, AB.

Calgary, AB, Canada

Long pipeline spreads and transportation corridors need survey control that stays accurate over distance. Global Raymac Surveys handles land surveying, geomatics, and pipeline survey work from Calgary for projects across Western Canada. Our team takes on RPRs, small commercial construction, and large pipeline construction that stretches hundreds of kilometres. We have 9 locations and field teams across Alberta, Saskatchewan, and British Columbia, so route work and construction staking can move with the job. Mobile mapping is part of that service. We operate Canada's first Trimble MX9 unit, which can capture a million points per second with sub-inch accuracy at highway speeds. Since 1978, we have completed more than 16,000 projects. That experience fits survey programs where turnaround, route length, and data quality set the job plan.