Oversize loads need the route checked before the truck rolls. Medicine Hat Pilot Car & Hot Shot Inc plans Pilot Car Service from Medicine Hat for Western Canada and U.S. moves that need standard pilot trucks, pole cars, steermen, or route surveys.
Our hot shot trucking keeps smaller time-sensitive freight moving across Alberta, Saskatchewan, and nearby cross-border lanes. This suits construction, oilfield support, and industrial transport when parts or tools need direct movement.
Traffic control and flagger support are available for wide-load movement, equipment access, and construction traffic around the haul. We match the pilot plan to the route, the load profile, and the timing at each road segment.
Since 2012, our Medicine Hat dispatch has focused on pilot trucks and hot shot runs where fast coordination and clear road support are central to the move.
Mel's Backhoe & Steaming provides excavating, grading, pipeline, reclamation, road building, and steaming services from Stettler, Alberta, supporting oil and gas operations in east-central Alberta.
Pressure and flow control start with the right valve package. We build around API 6D check valves and trunnion ball valves for jobs that need dependable shutoff in pipeline and pressure equipment service. We also supply floating ball valves and integrated actuator packages so the valve choice, the operator style, and the system rating stay aligned from the start. From Edmonton, we support teams that need a package they can install, inspect, and put into service without turning the valve into a separate sourcing job. That cuts down on last-minute substitutions and keeps the order tied to the actual operating condition, not a generic catalog pick.
Our trunnion ball valve line is aimed at demanding pipeline applications where shutoff has to stay dependable under load and repeated service. Floating ball valves and API 6D check valves serve different parts of the same operating plan. One design may suit isolation on a line section. Another may make more sense where backflow prevention or pressure control is the priority. We keep that choice practical. It helps maintenance planners match the valve to the flow path, the service interval, and the risk they are trying to reduce, instead of asking one product family to handle every duty.
Actuation shows up when the valve has to operate as part of a larger control strategy. Our integrated actuator packages are built for extreme environments and are meant to work with the valve, not around it. Across the product line, we offer API-compliant designs with fire-safe and NACE-compliant options, plus full-bore configurations. That gives our Edmonton team room to support sites that need more than a manual valve. It also helps keep the equipment easier to install, easier to service, and easier to integrate into automated or remotely operated systems when the rest of the asset already depends on consistent valve movement.
We put inspection in the foreground because release quality affects the job after the crate leaves our door. Meridian Valve uses rigorous factory inspection and third-party witnessing so each valve ships to spec. That shows up when a shutdown window is short, when the next crew is already scheduled, or when a package needs to be verified before it reaches the site. The point is to catch mismatches before they become field delays. We back our API 6D check valves, trunnion ball valves, and floating ball valves with a 48-month warranty from date of shipment. The warranty supports the product life we expect, and the inspection process supports the condition it leaves here in.
Parts supply and fabrication support keep a valve order from stalling when the system needs a replacement component or a package built to match the rest of the installation. That is where a catalog line stops being enough. A project may already have a housing, an actuator requirement, or a pressure equipment standard in place. We keep the job centered on those details so the valve conversation stays linked to run time, installation readiness, and the spec already set by the project. For plant turnarounds, pipeline work, or other pressure equipment jobs, that approach can shorten handoffs and make the final package easier to put into service.
If you are planning a pipeline package, replacing a pressure valve, or matching actuation and inspection requirements to a new or existing system, our Edmonton team can help scope the right valve family and support path. We handle valves and parts and fabrication as a planned part of the job. We use inspection and equipment to keep the service scope practical instead of turning it into a handoff between vendors. That keeps the next step practical: pick the valve type, confirm the operating standard, and move the order toward a package that is ready for the site instead of a bundle of separate components.
Safety apparel often needs decoration that will hold the logo without weakening the garment choice. Merit Embroidery & Printing Ltd. works in Calgary with promotions and apparel decoration for Alberta accounts and customers across North America.
We handle precision digitizing, embroidery, and heat pressed logos when branded clothing needs clean detail. For industrial and field-service apparel, we also stock Nomex FR embroidery thread for fire retardant safety garments and toques.
Patch sewing is part of our shop capability. We can sew embroidered patches, name bars, woven labels, logos, and PVC patches onto garments and safety apparel when a uniform program needs consistent placement.
Since 2006, our Calgary embroidery shop has grown into one of the larger wholesale embroidery houses in Western Canada. Apparel programs that need FR embroidery, safety garment branding, or detailed logo work can be planned through our local production team.
Western Canadian projects often need building space before a long conventional construction schedule can catch up. Metal Structure Concepts works from Kelowna on Buildings-Metal and Construction projects using pre-engineered steel buildings for industrial and commercial sites.
We serve British Columbia, Alberta, Saskatchewan, Manitoba, and Northern Canada. That regional focus fits shops, storage buildings, service facilities, and other metal building projects where weather, delivery distance, and occupancy timing shape the plan.
Pre-engineered steel buildings give us design flexibility, faster construction times, quicker occupancy, and lower initial and maintenance costs. Those advantages are practical on industrial yards and facility sites that need durable enclosed space without overcomplicating the build.
MSC also works through a partnership with Alpine Steel Buildings, adding more support for customers planning metal building projects. Our Kelowna team can match building layout, insulation needs, and construction timing to the site and intended use.
A missing tag or unclear hazard label can slow maintenance and create risk on an industrial site. Metalmark Engraving builds custom engraving and signs in Edmonton for equipment identification, safety marking, and durable plant or shop labeling.
We engrave stainless steel, aluminum, wood, plastic, acrylic, and other surfaces when the job calls for a permanent mark. Stainless steel engraving is a strong fit for harsh areas where printed labels may fade, peel, or wear off.
Industrial signage is a core part of our shop. We make labels and signs for safety hazards, operating components, and commercial or industrial applications that need clear wording and long service life indoors or outdoors.
Our roots go back to Stamco Engravers in 1949. Today, our Edmonton shop handles custom metal products and engraving projects where material choice, graphics, and readable marking need to be planned before production.
Meter-Man Flow Products 2006 Ltd provides Samplers & Sampling Equipment, Meter Sampling services to oil and gas operators in Red Deer, AB and across Western Canada.
As a key ingredient in fertilizers or as a low-carbon fuel, when produced sustainably, ammonia offers a pathway to addressing global food security and decarbonization challenges. Methanex produces 340kt of ammonia annually at its Beaumont facility. Multiple Ammonia Production Pathways Ammonia can be produced conventionally from natural gas (gray ammonia), with carbon capture (blue ammonia), or from renewable energy and water via electrolysis (green ammonia). Companies are exploring these pathways to develop low-carbon ammonia solutions.
We serve patients of all ages in St. Albert, Edmonton and surrounding Alberta communities. We have been at our present location for well over two decades. Our Mission Gateway Family Medical Clinic focuses on providing every patient with personalized health care throughout their lifetime.
Weld quality problems can delay fabrication, repair, and pressure-related field work. In Calgary, MICA NDT Inspection & Consulting Ltd handles Inspection Services for projects that need non-destructive testing and certified welding inspection before materials move forward.
We perform visual testing, ultrasonic testing, and magnetic particle inspection. These NDT methods help find surface defects, internal flaws, and weld issues without cutting into the part being checked.
Our inspection work is built around welding and material integrity. We support engineering, fabrication, and industrial repair situations where inspection records and clear findings are needed before the next project step.
Our Calgary inspection service is available for NDT and welding inspection planning where visual, ultrasonic, or magnetic particle methods are the right fit.
Inline pipeline inspection needs electronics that can survive vibration, battery limits, and confined tool space. Microlynx Systems Ltd designs rugged battery-operated electronics in Calgary for pipeline inspection and analysis systems, along with other industrial electronics and software projects.
We take hardware and software from concept into production. That can include electronics design, firmware, wireless networking, Windows applications, web applications, database work, and utility software when those pieces belong in the same engineered system.
Resource development, utilities, transportation, manufacturing, security, agriculture, defense, and logistics customers have used our electronics engineering depth for more than 35 years. Since 1984, our focus has been designs that work in real operating environments.
Pipeline tools and field equipment often need custom design rather than an off-the-shelf board. Our Calgary team builds the electronics and software stack around the inspection job, power limits, enclosure needs, and data workflow.
Adele Duguay Adele is an award-winning designer who loves plants, people, and patterns. She has a degree in Landscape Horticulture from Guelph, Ontario and owned a garden centre and landscape company for 9 years in Temiskaming Shores. She has certificatees in Permaculture Design, Color of Woman Intentional Creativity, and Feng Shui. She has an eagle eye for spatial and harmonious balance.
Metal building projects need drawings, materials, and schedule to land together. Mid-West Design & Construction builds custom pre-engineered steel buildings from Medicine Hat for agricultural and commercial sites across Alberta.
We run design-build projects as a general contractor and keep the building package tied to planning, implementation, and quality control. Our scope includes new building construction, renovations, and maintenance packages for existing buildings.
Our project history includes agricultural buildings for Viterra, Bayer, Monsanto, DuPont, Cargill, Pioneer, UFA, Case, Western Tractor, and Richardson. We also build office buildings and car dealerships when the scope calls for a full turnkey path from design through completion.
From Medicine Hat, we can plan a steel building or renovation around use, schedule, and long-term upkeep.
A fuel site or bulk plant loses revenue quickly when product cannot be measured, moved, or dispensed. Mid-West Pump (90) Ltd works from Lethbridge on petroleum transfer systems, compressor-related needs, and fuel-site installation.
Meters, pumps, registers, and fuel dispensers sit at the center of our petroleum path. Tank fittings, valves, nozzles, and hoses support the same transfer system when a site needs product movement restored or upgraded.
Installation and conversion work can involve air compressors and hoists. Larger projects may add lubrication equipment, propane systems, or bulk plant construction. Above-ground tanks, dikes, piping, and custom fabrication are handled when the site scope expands. Emergency calls are published for fuel sites and transfer systems outside normal hours.
MRC Global is a leading global distributor of pipe, valve and fitting (PVF), products and services to the energy and industrial markets. Based in Calgary, AB.
Midwest Fabricators Ltd. specializes in custom metal fabrication, laser cutting, plasma cutting, waterjet cutting, machining, and welding. No job too big or too small. Get your free quote today.
Midwest Laboratories. Providing third party analytical testing to our clients for over 40 years. Our vision is to be the trusted name in the industry that delivers science like no one else in the world, through innovation, teamwork and dynamic service.
Oil, gas, and construction sites need safety coverage that can move with changing field conditions. Safety First Industrial Canada delivers Safety-Programs and workplace medical service across Western Canada from its Alberta base, with experience serving industrial job sites since 1996.
When a project needs first aid coverage, prevention planning, or health and safety personnel, we bring trained staff and field-ready equipment to the site. Our work is built around active industrial settings where response time, clear procedures, and practical prevention all affect daily operations.
We serve the oil and gas industry, construction projects, and other industrial clients that need health and safety support in Western Canada. Decades of field experience help us plan around remote locations, changing weather, and the pace of site activity.
Our team focuses on workplace safety, medical response, and prevention programs for industrial employers. Safety First Industrial Canada plans each assignment around the site, the people on shift, and the safety coverage required for the job.
Production equipment has to match pressure, flow, and field operating needs before it reaches an oil and gas site. MOST Oil Corporation designs, manufactures, and distributes oil production equipment from Alberta for production operations around the world.
Our Edmonton and Leduc-area operation includes engineering, manufacturing, testing, and assembly. That in-house setup helps us build custom product variations for wells, facilities, and production systems that need specific flow control products.
We have served oil and gas production since 2001. Our 28,000 square foot facility supports equipment development from technical design through final assembly, with quality systems tied to API6A Monogram Program licensing and ISO 9001.
MOST works with production requirements where standard equipment does not answer the field condition. Our Alberta team plans flow control products and production equipment around the operating target, connection needs, and production environment.
Millwright Machine Corporation provides millwright services, welding, horizontal boring, and pressure testing from Cold Lake, Alberta, maintaining production equipment and facilities for heavy oil operators in the Cold Lake region.
Millwright Machine Corporation Grande Prairie provides machining, millwright services, horizontal boring, pressure testing, and welding from Grande Prairie, Alberta, maintaining oilfield production equipment in the Peace Country.
The ministry develops and implements policies and programs to promote the growth and responsible development of the province’s natural resources industries.
Miquelon Meter Services is a seasoned Gas & Liquid Flow Measurement Company, boasting a collective industry experience that spans over 75 years. From our locally based fabrication facility nestled in the vibrant epicenter of Canada's Oil & Gas Industry in Edmonton, Alberta, we take pride in serving an extensive client base that stretches across more than 36 borders worldwide. Our list of satisfied customers include a fascinating blend of fabricators, packagers, engineering firms and end users who have vested their trust in our capabilities. At Miquelon, we specialize in the provision of highest quality flow measurement solutions. We harness the power of the state-of-the-art technology to deliver practical, cost-effective solutions that not only meet, but often, exceed the expectations of our customers. Within our extensive warehouse, we maintain a vast inventory of flow measurement equipment, primed and ready to meet the demand of any project size. We understand the importance of timelines and delivery schedules in your project execution, which is why we work diligently and collaboratively with our customers to ensure that we meet and surpass these vital milestones. At Miquelon Meter Services, we are more than just a services company, we are a dedicated partner committed to contributing to the success of your business and projects. Trust us to deliver quality, efficiency, and timely delivery, every single time. Based in Edmonton, AB.
We are the missing link between people in need and the services they need to live the lives they choose. Our clients include people who live with addictions, misunderstood behaviours or mental health challenges. Many have lost contact with family and friends, and are socially isolated.
Vegetation growth can block access, strain right-of-way maintenance, and slow oilfield site planning. Mitchco Environmental handles weed control and industrial vegetation management from Kitscoty for oilfield and industrial sites across Alberta and Saskatchewan.
We use spraying, mowing, fencing, and brush removal to keep disturbed land and access areas manageable. These services fit pipeline corridors, industrial properties, lease areas, and other sites where vegetation has to be controlled before maintenance or reclamation can move ahead.
Our reclamation service uses light equipment for soil preparation, seeding, fertilizing, rock picking, root picking, sub-soiling, site cleanup, and disposal. The goal is to return damaged or disturbed land to a more stable condition after oilfield or industrial activity.
Environmental drilling is part of our site assessment work. We use truck-mounted and track-mounted environmental drill rigs for Phase II site assessments where soil or groundwater conditions need field investigation.
We have served the Alberta and Saskatchewan oilfield and industrial sector since 1998. Our Kitscoty team plans vegetation management, reclamation, fencing, and environmental drilling around site access, ground conditions, and project timing.
With so many options to choose from, the hard part might be making the final decision. Our friendly, no-pressure sales team can help. We’ll go through your list of must-haves, and match you with the vehicle that checks off all the right boxes. We want to see you smiling from behind the wheel of your perfect vehicle.
We sell, service and install grain storage, aeration and bin monitoring needs. We strive to bring top quality products at competitive prices with topnotch service and knowledge to our customers.
MJM Manufacturing MJM Manufacturing, Inc. has a rich legacy dating back to 1979 when Mike Mijares founded the company as a one-man operation in a two-car garage. With a steadfast commitment to quality, competitive pricing, and on-time delivery, MJM has grown to serve Fortune 500 companies, multinational corporations, and local businesses from its modern 43,000 sq ft facility. Today, with over 80 dedicated employees – many with over 45+ years of experience – MJM offers a wide range of services including silk screening, powder coating, painting, plating, welding, machining, assemblies, rack enclosures, and precision sheet metal fabrication.
MOJO Trucking provides Contaminated Soils-Handling & Transportation, Trucks-Tank services to oil and gas operators in Drayton Valley, AB and across Western Canada.
Fluid handling on oil and gas sites needs the right tank truck, pressure rating, and disposal path. From Sundre, Capital Pressure handles Trucks-Pressure and fluid transportation for oil and gas work across western Canada.
We move fluids for sweet and sour service, pressured service, and fresh or potable water needs. That supports wellsite, pipeline, and facility jobs where the wrong unit can slow down the whole shift.
Combination vacuum and scrubber units add another option for waste product management. With steamers and Bowie pumps, our Scrombo unit is built for large volume fluid transfers when a site needs controlled handling and cleanup.
Capital Pressure operates as a provincial and federally regulated carrier. Our western Canadian service area supports oil and gas fluid movement, pressure service, and tank truck planning from the Sundre base.
About MSSR | Mountainside Sales & Rentals About MSSR Mountainside Sales & Rentals Ltd. Locally owned and operated in Edson, AB for over 20 years, Mountainside Sales & Rentals is under new ownership. At Mountainside we are committed to providing top-quality rental equipment for a variety of industries.
A remote site has to be ready for the incident before the incident happens. Mountainview Safety Services Ltd delivers field medical coverage, first aid, ambulance service, and site security from Dawson Creek for resource and industrial locations across Western Canada.
Since 2004, we have served oil and gas, forestry, mining, construction, and industrial sites across Alberta, British Columbia, and Saskatchewan. Our service is built around distance, weather, access, and the reality that field response cannot depend on clinic-based timing.
Industrial medical planning has to match the job schedule and the risk on location. Safety presence, emergency medical coverage, first aid, ambulance service, and security support each change how a site manages people, access, and response.
For northern industrial locations, our Dawson Creek team lines up field resources around site activity, access control, communication needs, and the response level required before mobilization.
Fluid and waste management work can shift fast between hauling, excavation, de-watering, and cleanup. From Calgary, Movac Mobile Vacuum Svc Ltd runs hydrovac and vacuum truck service across Western Canada for commercial and industrial field needs.
Our fleet includes vacuum trucks, water trucks, semi-vac trucks, hydrovac trucks, combination units, end-dump trucks, gravel trucks, and ancillary equipment. Hydrovac excavation is used for controlled digging, while vacuum units handle fluid removal, waste movement, and debris cleanup.
Movac has more than 30 years in fluid management and heavy-duty equipment repair and maintenance. That shop background supports our own fleet readiness and extends to heavy-duty repair, fleet maintenance, and Commercial Vehicle Safety Inspection work.
Water hauling and de-watering are available when sites need fluid moved before, during, or after field activity. Our Calgary base gives us a practical launch point for hydrovac, vacuum truck, and fluid management jobs across Western Canada.
