Signs

Grande Prairie, AB, CAN

We handle compressor and pump solutions from our Grande Prairie base. Our team works on industrial compressors and pumps with maintenance, inspection and OEM parts support. We also bring millwrights, electricians and heavy-duty mechanics to the job. That keeps our response practical across Western Canada.

Calgary, AB, CAN

Industrial air compressor repair and pump service become urgent when compressed air or fluid movement starts affecting plant production. Chamco Industries works across Western Canada on compressor solutions, pump service and nitrogen generator supply. Our compressor offering supports facilities that need dependable air systems for production, maintenance and process needs. Pump and compressor service can happen in the field or through one of our six Western Canadian service centres. Parts, repair planning and replacement conversations stay tied to the asset instead of being treated like a catalog order. Since 1962, we have worked with compressor and pump systems for industrial facilities. Our Western Canada network keeps compressor repair, pump support and nitrogen generation close to the sites that depend on them.

Edmonton, AB, Canada

Metal parts do not stay clean through fabrication by accident. Our Edmonton shop handles custom metal fabrication and CNC machining for prototypes, industrial parts, and production runs. CNC machining and laser cutting handle the early shaping. Bending and welding follow when the part has to hold form, match a drawing, and move into the next stage. Powder coating and assembly finish the job in the same shop. We have been building parts since 1982, and the process is set up for single prototypes as well as repeat production. Dimensions and finish stay consistent from the first run through larger quantities.

Gibbons, AB, Canada

Drilling equipment repair and fabrication has to match field use, transport limits, and weld quality. Cheyenne Rig Repair & Supply, known as The Rig Shop, works from Gibbons as an oilfield fabrication and steel manufacturing shop for onshore drilling assets. We manufacture gear for conventional drilling and coil tubing applications. In-house engineering experience and design partners support builds that need a reliable drawing package before steel work begins. The Rig Shop has been in business since 1987. Our fabrication team is built around oilfield projects where fit-up, structural welding, delivery timing, and the finished drilling asset all have to line up.

Red Deer, AB, CAN

A service truck, yard gate, shop entrance, or project board has to stay readable after weather, dust, and daily handling. From Red Deer, City Screen Signs & Graphics Ltd. manufactures custom signs, decals, window graphics, and vehicle graphics for commercial and industrial customers across Western Canada. We have handled signage since 1988. That experience fits fleet and facility jobs where the sign is not just decoration; it has to identify equipment, direct traffic, mark a shop or yard, or keep a message visible from the right distance. Screen printed decals and digital signage give customers different ways to match the surface and use case. A vehicle graphic, window panel, safety decal, and facility sign each need different material choices and production details. Our Red Deer shop can plan a matched sign package around the asset, viewing distance, weather exposure, and information that needs to stay clear on the job.

Lethbridge, AB, CAN

Pipeline construction needs eyes in the field when route conditions, contractor activity, and safety requirements change through the day. CJB Ventures Inc delivers oilfield inspection services and pipeline construction consulting from Lethbridge for oil and gas projects. We were created to provide construction supervision services to the oil and gas industry. Our inspection team works on pipeline construction projects where field judgment, daily reporting, and ethical conduct are part of the job. Facility and construction consulting support project owners who need experienced supervision on oilfield scopes. When welding, blasting, fencing, remediation, meters, treaters, or signs are part of the project, we keep those activities tied to the inspection and construction plan rather than treating them as separate stand-alone jobs. CJB has operated since 2000, with a Lethbridge base for southern Alberta oilfield construction work. Our role is practical field oversight for pipeline and facility projects that need inspection services aligned with construction activity.

Athabasca, AB, Canada

Sawmill work needs equipment that can move with the log supply and still run safely through long cutting days. Clarke Portable Sawmills builds portable sawmills in Athabasca, AB, using welding and fabrication experience from our Canadian shop. We design and manufacture sawmills for personal and commercial use. Our team includes welders, fabricators, safety practitioners, sawmill workers, and lumber yard people, so our builds are shaped by shop skill and sawmill use. The Clarke 220 Live Log Dock adds heavy-duty material handling to a portable sawmill setup. Two-strand chain, hydraulic hookup, and custom bed sizing help match the dock to the workplace and the sawmill layout. Our Athabasca fabrication work is tied to sawmill manufacturing, lumber handling, and safety-minded equipment design. We focus on practical changes that make cutting, loading, and daily sawmill use safer and easier.

Taber, AB, Canada

powder coating, metal finishing We have been in business for over 20 years. started a hobby and developed into one of California’s preferred powder coating shops. Our facility houses a walk-in oven, spray booths, sandblasting booths, acid dips and the latest spray equipment to ensure the highest of quality product is produced. We pay close attention to detail and our work speaks for itself.

Edmonton, AB, CAN

Onshore Drilling Company | About Precision Drilling Innovating for a Brighter Future High Performance Meets High Value Precision delivers safe and sustainable services and technology to the oil and gas industry. We’ve helped countless customers reduce risks and costs at wellsites across the globe thanks to our Target Zero commitment, industry-leading drilling technology, and a demand for High Performance, High Value in every facet of our work. Our Services Precision creates value for our custome. Based in Edmonton, AB.

Calgary, AB, CAN

Dedicated to global gas compression products and applications. Based in Calgary, AB.

Calgary, AB, Canada

Get a Free Quote Evolution Welding Custom Welding Experts Unique Designs, Tailored Services If metal fabrication in Calgary is what you need, look no further than Evolution Welding. With our tailored services, we offer projects perfectly suited to our customer’s specifications. Our unique designs and great service provide steel and metal work that meets all your needs. You can be confident knowing we are the custom welding experts, and take pride in each and every specialized product that we deliver.

Edmonton, AB, Canada

Highly trained safety professionals who serve the OHS and Electrical Community. Our History Established in 1994, we have a proven track record and an impressive client base. We have provided technical and safety training to over 140 different organizations and over 85% are repeat customers. Our Service We continuously improve our courses and processes to implement innovative safety solutions.

Fort St John, BC, CAN

Rig maintenance in the Peace Region depends on electrical field teams that can keep field power, motors, and site systems moving. Conway Electric Inc. serves Fort St John as an electrical contractor for oilfield and industrial sites. Since 1973, our team has handled rig maintenance jobs where failed power or control equipment can slow a site down. We bring the experience and equipment needed for remote electrical faults, generator rental support, and electric motor repair. We also repair signs when site identification or yard access needs attention. Short-term and long-term generator rentals are available for planned work, outage coverage, and field service windows. Our Fort St John crew plans each call around the asset, the fault, and the site conditions first.

Fort St John, BC, CAN

We pride ourselves on being “The Company That Service Built” so you know service is always our foremost thought. It’s something we offer 24 hours a day, 7 days a week. We understand the havoc that unexpected outages can create. Whether you’re home, at work or on a remote site, we’re available 24/7 to ease the strain broken equipment adds to your life.

Mississauga, ON, Canada

CPC Pumps International serves hydrocarbon processing customers from Mississauga with API 610 centrifugal process pumps. We design, manufacture, test, and maintain engineered heavy-duty units for process-critical applications. Hydraulic performance, unique design, and production capability shape each pump package around the duty point and operating conditions. We build around the application instead of forcing a standard configuration into the wrong job. Since 1957, our technical and mechanical team has helped select, test, and maintain compliant process pumps. We keep the focus on pump data, duty-point fit, and hydrocarbon-processing reliability.

Brampton, ON, Canada

Crane Pumps & Systems in Brampton designs and manufactures wastewater pump solutions for collection, lift, and treatment systems. We build equipment for wastewater transportation and management where flow has to keep moving. The focus stays on difficult fluid transfer, system lift, and long service cycles. Our Brampton team carries Crane's industrial manufacturing background into wastewater pumping. We keep the product line centered on transport and system management for collection systems and facility work.

Fort St John, BC, Canada

Oilfield safety signs have to stay clear in yards, lease roads, shops, and industrial entrances. Creative Signworks Inc. makes Signs from Fort St John, BC for commercial and oilfield settings across Northern British Columbia. We produce custom signs, decals, banners, and vehicle graphics when equipment, buildings, and field vehicles need readable identification. Lighting and commercial signage are part of the same sign program when a site needs visibility after dark or from the road. Our oilfield safety signage work is built for industrial use, where labels, warnings, and site signs need to be easy to read before someone reaches the hazard. The Fort St John shop also handles brand signage and auto graphics for local service fleets. For a site, fleet, or storefront in the Peace Region, our team can plan sign sizing, materials, and installation around the place the sign has to work.

Esterhazy, SK, Canada

END-TO-END Concrete Solutions for Every Sector From new builds to infrastructure, we deliver quality solutions for all your construction needs. Commercial Providing concrete, aggregates, and precast products for everything from new builds to major infrastructure upgrades. Industrial Delivering concrete designed to withstand harsh environments, offering the durability and safety standards required for critical industrial operations.

Springwater, ON, Canada

Custom Signs & Designs is a Signs company based in Springwater, ON.

Camrose, AB, Canada

Providing Electrical Contracting & Maintenance Service in Camrose Alberta & Surrounding Areas Since 1981.

Edmonton, AB, CAN

PEI's trusted business provider. Custom visual communication, printing, signs, & promotional products. Serving Atlantic Canada for 30+ years. Based in Edmonton, AB.

Calgary, AB, CAN

Ensure workplace safety and compliance with Danatec's expert-designed training. Providing Safety training for over 40 years. Based in Edmonton, Calgary, AB.

Calgary, AB, Canada

From Calgary, DCI Technologies Inc. plans and deploys industrial wireless WAN systems for oil and gas sites, rail corridors, and utility assets that cannot lose a data path. Since 1997, we have helped design and deploy network communications for emergency services and water and wastewater systems. We also support mining and electrical utility projects when the link has to hold through rough conditions. We work with Peplink industrial cellular routers and rugged modems. Narrowband licensed IP radios and Maple Systems touchscreens round out the setup when a site needs both connectivity and operator interface hardware. Failover and bandwidth bonding are part of the plan when the field location cannot afford a dropped connection.

Delta, BC, Canada

Over 25 Years Of Manufacturing Heavy Duty Custom Gear Box Housing, Reducers, Shafts. Based in Delta, BC.

Acheson, AB, Canada

A truck body that misses payload or access slows the whole shift. Dematco Manufacturing Inc. in Acheson turns truck body building into service bodies, flat decks, picker decks, and welding decks for Edmonton-area construction and infrastructure fleets. Our shop works in sheet metal and welding, then adds canopies, custom units, dump boxes, and van shelving systems when the truck needs more storage or load control. Wide load signs finish the road-ready setup. Truck equipment such as cranes and compressors can be part of the build conversation when the unit needs more than a deck or service body. That keeps the build centered on material handling, storage, and on-site mobility for Edmonton-area fleets.

High Prairie, AB, CAN

Web site design and illustration services for individuals and commercial customers with all work guaranteed and clear accurate quotes. Based in High Prairie, AB.

Okotoks, AB, Canada

A missed flame or gas event can become a facility-wide emergency. Det-Tronics designs, manufactures, tests, and commissions flame detectors, gas detectors, and hazard mitigation systems for oil and gas facilities and other high-risk industrial operations worldwide. Our product line includes flame detectors, combustible gas detectors, toxic gas detectors, and explosion-proof smoke detectors. These systems are built for critical process areas where detection speed and false-alarm control both matter. Certified SIL 2-capable detection solutions are part of our core manufacturing program. We also build an addressable safety controller compliant with NFPA 72 and certified for annunciation and releasing. Engineering and testing are based at our Minneapolis headquarters, with products and systems made for installations around the world. Our work fits oil and gas, petrochemical, chemical, aerospace, automotive, and munitions environments where hazard detection is part of the operating plan.

Calgary, AB, Canada

Pipeline and wellhead flow control needs more than a stock valve when pressure, shutoff, and delivery timing affect the job. In Calgary, DHV Valve Canada works on engineered valve packages for oil and gas pipelines, wellheads, and severe-service industrial applications. We build around the valve duty first. Ball valves are used for reliable liquid and gas shutoff. Cast steel valves and forged steel valves are selected when pressure, temperature, or material requirements drive the specification. Our wellhead valve line supports production and drilling-related service where flow control has to match the asset, not just the pipe size. DHV Industries has supplied severe-service valve solutions across multiple industries, with fast turnaround and prompt delivery listed as core parts of the operation. For Calgary-area projects and shipped valve packages, our team can discuss valve type, pressure class, material needs, and delivery timing for pipeline, wellhead, and industrial fluid service.

Edmonton, AB, Canada

A custom oil and gas part has to match the drawing, the material, and the way it will run in service. Digital Machine Ltd is an Edmonton machine shop focused on CNC machining for oil and gas and industrial project work. We work on customized machining needs where standard parts do not answer the job. CNC turning, CNC milling, and manual machining capacity give us room to handle both manufactured parts and repair-style work for industrial customers. The shop history dates to 1991, with more than two decades of manufacturing experience noted in our source material. Our facility also lists a 20 ton crane lift, which helps with heavier machined components and project parts moving through the shop. Edmonton oil and gas machining work can involve a single component, a repeat part, or a project idea that still needs practical shop input. Our machining team can plan the part path around tolerance, handling, and delivery needs for industrial projects.

Sherwood Park, AB, Canada

A fabricated part that misses the real use case can slow down a repair, display build, or site improvement. DLR Metalworks handles custom metal fabrication in Edmonton and the surrounding area, with shop visits by appointment so we can understand the project before we build. We guide each fabrication job from the first idea to a finished product that fits the way it will be used. That can mean choosing the right metal approach, solving a fit problem, or making a durable finished piece for a commercial, shop, or facility setting. Our Edmonton-area fabrication shop has served customers since 2019. We back custom fabrications with a lifetime workmanship guarantee for as long as you own the product. When a metal fabrication project needs a clear plan before cutting or welding starts, our team can review the goal, the use case, and the finish expected from the build.

Edmonton, AB, Canada

A blowout preventer, stuffing box, or tubing rotator needs tight machining when the part has to fit right the first time. Domino Machine builds those components from Edmonton for oil and gas use. We also build API products for parts that need to stay on spec. Our machine shop takes on custom machining when a standard part will not solve the field problem. We machine around pumps, valves, and related production equipment without turning the job into a generic catalog order. On-site gas nitriding is handled in house, which cuts the turnaround compared with sending parts to another shop. That gives us another way to control wear on parts that live in hard service. With more than 50 years of custom machining behind us, our Edmonton team keeps quality and on-time delivery at the center of the job. We can talk through blowout preventer parts, tubing rotator components, or a machined replacement that needs a faster path.

Edmonton, AB, Canada

Plastic parts fail fast when the shape, material, or weld is wrong for the job. Drader Manufacturing Industries Ltd builds custom plastic manufacturing solutions in Edmonton for construction, material handling, grocery, agriculture, and other industrial users across Canada and the United States. We make injection molded parts, thermoformed components, and vacuum formed products for custom projects and ready-made product lines. Plastic welding gives us another way to repair, join, or build plastic assemblies where molded parts alone do not solve the problem. Our Edmonton shop also works with recycled plastic streams, which supports practical product design when durability and repeat production both matter. For construction and handling applications, we focus on parts that can stand up to repeated use in warehouses, yards, shops, and jobsite supply systems. Founded in 1947, Drader has long operating history in plastic product design and manufacturing. Our team can discuss custom molded parts, plastic welding needs, or ready-made product availability for industrial and construction use.

Streamstown, AB, Canada

Rig control faults slow a drilling schedule fast. Drilex Oilfield Services Ltd in Streamstown supports drilling and workover programs with oilfield equipment rental, technical services, and automation. We also back well intervention and production sites when the next stage depends on reliable gear. We keep drilling and surface equipment ready for the next stage. Well control and downhole tools stay part of the same rental mix. Pumps, tubulars, and safety units round out the gear we place on site. Top drive troubleshooting, VFD system diagnostics, and rig control system upgrades address the faults that slow the rig. Repair, refurbishment, and recertification keep that equipment in serviceable condition. Ageing analysis and health checks guide longer-term decisions. Steel renewal and remedial plans follow when equipment needs deeper work. Since 2004, our Streamstown team has delivered project execution and lifecycle support for global energy operations.

Swift Current, SK, Canada

Our high-quality, fit-for-purpose equipment systems are built to deliver superior performance, so you can keep your production stream flowing. We have been in business for over forty years, with a loyal customer base in both Canada and Europe. We do not strive to be the lowest cost provider of rod pumps or components, but rather to provide superior quality, fit-for-purpose equipment that will provide our customers with the most cost-effective method of producing hydrocarbons. We have a highly experienced, stable and motivated workforce dedicated to the design, development and manufacture of rod pumping systems and related accessories.

Edmonton, AB, Canada

Energy automation needs field hardware and control subsystems that match the job, the site, and the data path. Dycor Technologies designs Communication Equipment & Systems from Edmonton for energy, defence, industrial automation, and emerging technology applications. We build fit-to-purpose data acquisition and control subsystems for teams that need signals, controls, and communications to work together in field or plant environments. Our engineering starts with the operating problem, then turns it into a practical subsystem. Founded in 1981, our Canadian team works with rugged industrial components, accessories, and tools for energy automation and industrial control use. The Dycor shop supports projects that need field-ready parts matched to engineered subsystems. For energy and industrial automation projects, we can discuss the control need, communication path, and field conditions before a subsystem is built or supplied.

Regina, SK, Canada

Integrated Engineering & Manufacturing Based in Regina, SK.

Red Deer County, AB, Canada

Experience the ‘Pinnacle’ Modern Living, Redefined Step inside THE PINNACLE , where modern design meets efficient living. This beautifully crafted modular home showcases open-concept living spaces, energy-efficient construction, and high-quality finishes throughout. From the spacious kitchen with contemporary cabinetry to the bright, inviting living room, every detail is built for comfort and style.

Edmonton, AB, Canada

That’s All” and put it in his wallet. Today those words remain, on signs in our buildings and in the hearts and actions of the people who today make EMJ a company committed to “Making a Material Difference®.” Jorgensen Steel and Aluminum was founded in 1921 and quickly became a highly-regarded name in the U.S. Jorgensen grew to stock one of the country’s largest inventories of bar, sheet, plate and structural steel and aluminum. Read the history of EMJ USA.

St Albert, AB, Canada

Promotional Products Distributor. Echo Promotions. Edmonton About ABOUT US We help our customers create memorable brand experiences using the POWER of Promotional Products. We offer the very best services in our field. We never settle for second best, and always have your satisfaction as our top priority. It’s who we are, and we are proud of it.

Burlington, ON, Canada

Remote camps and industrial sites need waste systems that keep working in hard weather. Eco Waste Solutions in Burlington builds deployable waste management systems for construction camps, communities, and field operations. That includes thermal conversion and waste-to-energy technology. Our consulting and project planning keep the setup aligned with the waste stream and the operating stage. The systems are designed for waste volumes from hundreds or thousands of people. They can be deployed from desert heat above 40 C to Arctic conditions below -40 C. More than 80 projects in 18 countries shape how we approach these systems. From Burlington, we keep the focus on practical waste handling that can move with the project.