Heaters

Calgary, AB, Canada

Mechanical Equipment Sales Calgary, Alberta Based in Calgary, AB.

Medicine Hat, AB, Canada

Since 1978, our Medicine Hat branch has kept rental equipment close to the job when a project needs quick turnaround. We stock compact, aerial, and heavy construction machines for site access and lifting. Heaters and pumps fill in winter work and water-moving jobs. Tools and welding gear support setup and field repair without sending the job across town for a second rental. Our branch sits inside a Canada-wide rental network, so local projects can stay close to the yard while a larger fleet stays available when a job needs more options.

Edson, AB, CAN

About MSSR | Mountainside Sales & Rentals About MSSR Mountainside Sales & Rentals Ltd. Locally owned and operated in Edson, AB for over 20 years, Mountainside Sales & Rentals is under new ownership. At Mountainside we are committed to providing top-quality rental equipment for a variety of industries.

Prince George, BC, Canada

We have redesigned our website. If you see this message, the referring page no longer exists. You'll be redirected to our new website in 3 seconds. .

Edmonton, AB, CAN

Norseman Inc provides Tarpaulins services to oil and gas operators in Edmonton, AB and across Western Canada.

Fort St John, BC, Canada

Rotating electrical faults can park a work truck or leave construction gear dead on the pad. Northern Auto Electric in Fort St John handles truck service and repair through rotating electrical rebuilds for Northern BC and Alberta. We rebuild DC electrical motors and starters. Alternators and generators stay on the same bench, with circuit boards and some AC electrical components supported when the fault sits deeper than the starting system. Vehicle outfitting sits beside RV repairs and parts, while the shop also works on big construction and agricultural equipment. We keep the focus on mobile machines that need charging, starting, or control work before they get back to site. Northern BC and Alberta customers can line up parts and repair from the same counter. The Fort St John shop keeps the electrical side and the mechanical side in the same place.

Red Deer, AB, CAN

Northland Radiator Service Ltd is a Red Deer, AB-based provider of Construction, Heat Exchangers, Heaters, Hoses, and 6 more service areas services.

Airdrie, AB, Canada

Oilfield process equipment has to match the pressure envelope before fabrication starts. NRG Process Solutions in Airdrie designs equipment for gas processing projects and pressure vessel builds. We build around pressure vessels, flare systems, and heaters. Fittings and instrumentation stay part of the same design and drafting package. Our design and drafting package uses standard ASME code pressure vessel designs that can be built in different sizes and configurations. We also supply the Canadian Registration Numbers needed by pressure equipment manufacturers for fittings and vessels. That keeps new process packages and replacement vessels moving toward production.

Bonnyville, AB, Canada

is a family run business co-owned by William Cole & Raymond Normand. We opened our doors in March of 2005, starting with a single employee and a small shop of 4 bays. At Overdrive Heavy duty, in 2007, we expanded our shop and our employee base diversifying more of what we could offer to our increasing customer base. In 2010, we opened our fully stocked and operational parts department to the public.

Medicine Hat, AB, Canada

— Leading contractor in plumbing, heating, and ventilation. was established in 1985 as a labor subcontractor, and in 1990, began offering full Mechanical Contracting services and quality commercial construction installations. Southern Alberta's leading contractor in plumbing, heating, and ventilation design and installations. PadCar Mechanical is a leading mechanical contractor in plumbing and heating design and installations.

Edmonton, AB, Canada

Production packages have to match pressure, process flow, and field layout before they leave the fabrication floor. Panax Oil & Gas Inc. manufactures oilfield packages in Edmonton for projects across Alberta, Saskatchewan, and British Columbia. We build pressure vessels, tanks, free water knockouts, oil emulsion treaters, separators, and headers for oil and gas facilities. Those assets help separate fluids and connect production streams before the package moves to site. Skid fabrication gives facility teams a cleaner path from shop build to field tie-in. Pump skids, meter skids, and MCC skids can be planned around layout, access, and installation timing. Our Edmonton shop keeps vessels, tanks, heaters, and production packages close to Western Canadian project needs.

Edmonton, AB, CAN

North American industry leader in the pipeline specification and application of wear and corrosion resistant coatings - Paragon Protective Coatings Ltd. (PPC). Based in Edmonton, AB.

Fort St John, BC, Canada

Cold roads, spill cleanup, and freeze-up work can land on the same field schedule. Peaceland Oilfield Services keeps water hauling, tank trucks, and fluid hauling moving from Fort St John across the Peace Region and Western Canada. Water trucks handle summer road dust control and domestic water hauling. Combo vac and hydrovac units fit spill cleaning and frac support when the site needs fluid removed without slowing the job. Steam trucks add 1 million BTU boilers and high-pressure pumps for cold-weather sites. Dry steam and roughneck heaters fit cleanup and freeze-up work. We also handle industrial equipment rentals and gravel hauling when a project needs another piece of field equipment in the same plan.

Edmonton, AB, CAN

Offering OE quality automotive parts. We sell radiators, fans, condensers, a/c kits, compressors, accumulators, driers, evaporators, expansion devices, hoses, o-rings, headlights, taillights, fog lights, side mirrors, window regulators, heaters, and fuel tanks. Based in Edmonton, AB.

Grande Prairie, AB, CAN

has been meeting hauling needs and exceeding the expectations of oilfield companies throughout Alberta and Northern BC. Specializing in facility setups and certified to haul hazardous waste, our fleet is comprised of the modern and maintained equipment that’s needed to provide a wide range of solutions. Whether we’re removing hazardous waste from your worksite or moving and setting up a building, we provide efficient and effective services according to our clients’ budgets and schedules. Our Commitment : Exceeding Safety Requirements We strive to provide our clients with services that not only satisfy their business’ needs but also exceed all regulatory requirements for safety.

Calgary, AB, Canada

Mobile Heating, Cooling & Air Quality. Polar Mobility About Us Blog Gallery Videos FAQs Locations Contact Search Customer Service 1-800-309-8155 Customer Service: Monday-Friday: 8am-5:30pm. We provide heating and cooling units for heavy mobile equipment from highway trucks, to mining machinery, to commercial transport refrigeration vehicles. Featured Heating and Air-Quality Products P-5071 High Voltage HVAC Heater Air-Conditioner Designed for rough environments and extreme high-temperature conditions found at mine sites and job sites around the world. Built to last, and designed to eliminate operator fatigue by creating a comfortable cab environment.

Winnipeg, MB, Canada

Turbine outages leave little room for tool delays. Power House Tool Canada works from Winnipeg with turbine tools for outages and turnarounds, including bolt heaters, radius turbine taper gauges, and alignment tools used on gas turbine and power generation maintenance jobs. Our tool line is built around shutdown work where fit, heat, and alignment affect the schedule. Bolt heaters help with controlled fastener work, taper gauges help verify critical turbine fits, and alignment tools help maintenance teams keep rotating equipment work on track. Power House Tool equipment has been used by major industrial and power users, including EXXON, General Electric, Siemens, Toshiba, NASA, the U.S. Navy, and major utility systems. That history sits behind our focus on specialty maintenance tools for the power industry. For Canadian outage planning, our Winnipeg location can discuss turbine tool availability, specialty gauge needs, and the tooling required for a planned turnaround or emergency maintenance window.

Edmonton, AB, Canada

Heating equipment has to match the system already on site, especially when cold-weather service windows are tight. From Edmonton, Premier Industrial supplies heating equipment and supplies for HVAC companies across Western and Northern Canada. For more than 60 years, our family-run team has supplied burners, heaters, and controls through a network of 90+ brands. We also keep replacement parts moving when a system needs a like-for-like changeout. That gives commercial, industrial, and facility heating projects a clear route when new equipment or parts have to match the system in place. Our Edmonton counter keeps cold-climate heating projects moving with steady brand access and product selection built for maintenance and changeouts.

Taber, AB, Canada

At Prime Rentals Ltd, we keep construction rentals ready in Taber for contractors who need lift, heat, pumping, and tool capacity close to the job. Our rental yard serves construction sites and industrial facility projects where weather, access, and timing shape the day. Heaters help keep cold-weather tasks moving, pumps handle water movement, and welding gear or tools fill gaps for repair and setup. Cooper Equipment Rentals backs the local branch with locations across Canada. From Taber, we help southern Alberta contractors match the machine class, attachment, and rental window to the site plan.

Nisku, AB, CAN

Priority Projects in Nisku builds oil and gas production equipment for field and facility jobs that need a package shaped around the site. We combine sales, rentals, and custom fabrication so the equipment can match pressure, flow, and footprint. We started as a rental company and grew into custom packaging while we kept building the rental fleet. That lets us cover temporary units, refurbished customer-owned equipment, and new packaged builds from the same shop. Our work also covers pressure vessels and hydro-testing. We add instrumentation and controls when the package needs them. We can build in valves or heaters as part of the same system. Customer-owned equipment can be refurbished by Priority Projects and stored for reasonable periods after purchase or repair. Our Nisku team keeps the shop work tied to the next installation or changeover.

Red Deer, AB, CAN

Pro Energy RENTALS | SERVICE | SALES | PARTS YOUR #1 TRUSTED PARTNER IN THE POWER SOLUTION INDUSTRY Built to Brave the Elements, Ready to Perform Anywhere If you’re searching for power generator rentals, service, sales, or parts in North America look no further than Pro Energy. At Pro Energy, we offer fast and reliable solutions with Based in Red Deer, Red Deer, AB.

Calgary, AB, CAN

Process heat can fall out of spec when a burner drifts or a heater package needs a new setup. Process Combustion Systems Inc. in Calgary builds custom engineered burner and heating systems for industrial fired equipment and process heating jobs. We package the burner, heat duty, and controls into one turn-key system. Site conditions guide the final layout. Ultra Low NOx projects are part of our background. We also handle field service on burners and heaters when a unit needs repair or tuning. Incinerators, controls, and mechanical combustion equipment stay in scope when older assets need replacement planning. Our Calgary crew keeps the focus on fired equipment that has to run reliably inside a working plant.

Fort St John, BC, CAN

A Fort St. John field job can need rental gear for access first, then fluids after conditions change. Raven Oilfield Rentals supplies oilfield rental packages for Northern BC and Alberta work. Ground support starts with access. Matting and pilings help set up work areas, while pumps and tanks support temporary fluid handling when site conditions change during a job. For Raven rental planning, the key variables are location, access condition, matting need, tank or pump requirement, and timing to site. We keep the rental package tied to the field problem instead of a broad catalog list.

Grande Prairie, AB, CAN

Cold weather, rough access, and temporary power needs can turn a Peace Region job into lost time. Rentco Equipment Ltd rents heavy gear from Grande Prairie for oilfield and industrial projects. Construction, forestry, and agricultural customers are also served when the job calls for dependable rental inventory. Our rental fleet is built around site conditions. Generators cover temporary power, heaters support winter activity, and light towers keep early starts or night shifts visible in remote yards. When water handling or access drives the job, pumps and all-terrain vehicles help match the ground condition. Tool and construction rentals fill short-term gaps without forcing a contractor to buy every item. Rentco has served the Peace Region since 1963.

Calgary, AB, Canada

Excellent customer service. Loyalty to long time employees and time-tested strategies of helping everyday people enjoy their homes in comfort lies at the heart of Arpi’s community-minded approach. This philosophy has allowed us to grow as an independent company. Arpi's is a company that began in the home of Arpi Berdin.

Estevan, SK, Canada

Yet, most employers don't have the time or resources to recruit or train new staff themselves. Programs at the larger technical institutes can be lengthy or financially out of reach. In the case of apprenticeship, a job in the trades is required before you can be indentured. So, how do employers find qualified people and how do YOU get your boot in the door.

Athabasca, AB, CAN

We specialize in all aspects of construction equipment rentals and are an industry leader in generator rentals. We also have a division of oilfield rentals. Based in Athabasca, AB.

Eckville, AB, CAN

Temporary heat can decide whether an industrial job keeps moving through cold weather or a maintenance outage. Silverback Equipment Rentals rents steam boilers and heating rental equipment from Eckville, Alberta for projects across North America. We focus on rental equipment for steam heat, hot water heat, glycol heat, and heater applications. Each rental is planned around the heating requirement and the expected run time on site. Steam boiler rentals are used when process heat, freeze protection, or temporary plant heating cannot wait for permanent equipment. Our heater fleet gives industrial sites a way to keep heat available during planned work or seasonal demand. For rental planning, our Eckville team can discuss steam boiler capacity, heater availability, and the heat load needed for the job.

Drayton Valley, AB, Canada

(ACR) is an award-winning full-service equipment rental company with (9) convenient locations. ACR was formed in 2009 when the CAT Rental store in Drayton Valley was purchased by an investors group made up of current ACR employees and several local business owners. That group had one vision for ACR, to become an industry leader in equipment rentals by offering an unmatched customer service with reliable equipment, and that vision is being realized more and more each day. ACR started off as a small rental store offering a limited range of equipment, but with hard work and determination, it has grown its fleet of equipment and is now considered one of the premier rental stores in western Canada.

Bassano, AB, Canada

Weather and dust can be hard on exposed electrical gear. Skill Metal Fabricators, Inc. builds metal fabrication and machining work from Bassano, AB, with CSA-approved NEMA electrical enclosures that help keep equipment dry and protected. Our shop handles metal manufacturing and production work when a housing, bracket, or enclosure needs exact dimensions. We shape parts through fabrication and machining instead of forcing one shop process onto every job. We have served Western Canada for more than 30 years. That background shows up in enclosure builds and shop-made components for industrial equipment that has to stand up to harsh weather. Our Bassano shop works from drawings or enclosure specs on custom builds for weather-exposed equipment.

Innisfail, AB, Canada

South 40 Industries Ltd ties design to a real job condition around Order":"true","specs. The nearby scope includes manufacturing, flowback assets and pressure assets. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make. Our design scope starts with the condition of the asset. It can move a rough need into a practical build path. The manufacturing side helps customers build equipment around the pressure, fit, and operating need. For customers in Order":"true","specs, that means fewer vague calls and a better start for quoting or planning. With flowback assets, the important details are fit, access, timing, and handoff. It can support flowback and production jobs with purpose-built assets. The pressure assets side helps customers keep high-pressure service tied to code, fit, and protection needs. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Welding works best when it is tied to the way the job will be installed or repaired. It can repair or modify metal when fit and access are tight. The insulation side helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time. Design is easier to judge when the market context is clear. The source material points to oil and gas and custom work. That gives the capability a real operating frame instead of a generic industrial label. Most industrial calls start with something practical. A part has to be made. A unit has to be checked. A system has to keep running. We frame design with manufacturing so the next step can be tied to the asset, timing, and site condition. In Order":"true","specs, that may mean a shop visit, a branch conversation, a field dispatch, or a quote request tied to a real job. This kind of detail also reduces handoff risk. If the first call is about design, the customer can still see when manufacturing belongs in the same discussion. Order":"true","specs adds the local planning layer, especially when timing, access, or branch response affects the job. That keeps the request from bouncing between unrelated categories. A good close should leave the customer with a practical next conversation. That starts with design and may extend into manufacturing, flowback assets and pressure assets. This scope connects to oil and gas and custom work. Listed as established in 1993, the operation also has a continuity signal for repeat local purchasing. Order":"true","specs gives the location context without copying a full address. The next move should be clear: ask about the service, the asset, the timing, or the quote path. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use design as the anchor, then bring in manufacturing where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether design belongs in the first call. They can also see when manufacturing should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when design remains close to manufacturing. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Order":"true","specs sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use design as the anchor, then bring in manufacturing where it helps clarify the next step. That keeps the path helpful without adding a loose series.

Oxbow, SK, CAN

Spearing Service L.P. offers 24/7 oilfield trucking, fluid hauling, frac support, and sand and gravel services with a focus on safety and reliability. Based in Oxbow, SK.

Calgary, AB, Canada

SPS West - Engineered Industrial Products Fabrication Proudly Canadian. Delivering Industrial Solutions. We assess needs, engineer solutions, and provide personalized support. With rigorous quality assurance and ongoing customer care, we ensure your satisfaction.

Sherwood Park, AB, Canada

Call 1-780-449-5322 today! Get reliable plumbing and HVAC contractor in Sherwood Park, Alberta. Contact our HVAC company for AC installation, Furnaces, and more.

Nisku, AB, CAN

Strad is the leading provider of industrial products and services for oil & gas, power transmission, pipeline and agriculture sectors. Based in Calgary, Nisku, AB.

Nisku, AB, CAN

Strad is the leading provider of industrial products and services for oil & gas, power transmission, pipeline and agriculture sectors. Based in Calgary, Nisku, AB.

Whitecourt, AB, CAN

Strad is the leading provider of industrial products and services for oil & gas, power transmission, pipeline and agriculture sectors. Based in Calgary, Whitecourt, AB.

Whitecourt, AB, CAN

Strad is the leading provider of industrial products and services for oil & gas, power transmission, pipeline and agriculture sectors. Based in Calgary, Whitecourt, AB.

Red Deer, AB, CAN

Cold weather can slow frac water handling, facility maintenance, and oilfield startup schedules. Sub-Zero Heating rents steam boilers and industrial heaters from the Red Deer area for Western Canadian oil and gas sites that need temporary heat to keep production moving. Our boiler rental fleet includes high-pressure steam boilers and large-volume frac-water heaters. We also work with hot oil heaters and heat exchangers when a job needs controlled process heat instead of basic space heating. Skid-mounted systems can be sent ready for field use with onboard generators, light towers, and dual-fuel capability. That setup reduces extra mobilization planning on remote sites where power, fuel choice, and winter access all affect the heating plan. Sub-Zero Heating Technologies Corp. has served Western Canadian industry since 2005. Our Red Deer County team plans steam boiler rentals and heating equipment around oil and gas site conditions, rental duration, and the heat load required for the job.

Drayton Valley, AB, Canada

(ACR) is an award-winning full-service equipment rental company with (9) convenient locations. ACR was formed in 2009 when the CAT Rental store in Drayton Valley was purchased by an investors group made up of current ACR employees and several local business owners. That group had one vision for ACR, to become an industry leader in equipment rentals by offering an unmatched customer service with reliable equipment, and that vision is being realized more and more each day. ACR started off as a small rental store offering a limited range of equipment, but with hard work and determination, it has grown its fleet of equipment and is now considered one of the premier rental stores in western Canada.