A failed pump can stop liquid transfer, drilling activity, or washdown fast. In Nisku, J C Industries repairs, sells, and designs pumps for Alberta industry and oilpatch applications.
We work with mud pumps, transfer pumps, circulating pumps, wash pumps, boiler pumps, lube pumps, and industrial pumps. Each pump family serves a different pressure, flow, and fluid-handling need.
Our shop also handles pressure washers, motors, accessories, and kits. Founded in 1993, J C Industries is built around commercial and industrial pumping technology for oilwell, drilling, and liquid-transfer settings.
You are here: Home / About us About us J.D. Mollard and Associates (2010) Limited [JDMA] is a privately owned engineering, geoscience and environmental consulting agency based in Regina, Saskatchewan, Canada. The firm specializes in applied multidisciplinary air photo, satellite image, and LiDAR interpretation and analysis for a wide range of engineering, geological, geotechnical and environmental applications. Desktop studies are complimented with detailed field studies including aerial reconnaissance by helicopter and unmanned aerial vehicles (UAVs), precision GPS mapping of specific features, electromagnetic (EM) ground conductivity mapping and low impact field investigation techniques.
JD Piling & Anchor Ltd provides Rat Hole Drilling, Fencing, Pile Drivers, Pilings services to oil and gas operators in Fort St John, BC and across Western Canada.
Soil, water, and pavement conditions can change the cost and risk of a construction project. From Edmonton, J R Paine & Associates Ltd carries out environmental assessment, geotechnical engineering, and materials testing for infrastructure, oil and gas, transportation, and land development work.
We guide assessment, approvals, and permitting with engineers, geo-scientists, and environmental specialists. That work helps projects move through site investigation and regulatory steps before field construction starts.
For grading and transportation projects, our team is pre-qualified by Alberta Transportation for Quality Assurance Testing. The scope includes grading QA, granular base course QA, asphaltic concrete paving MQA, appeal testing, Marshall mix designs, Superpave mix designs, and mobile field lab testing.
Our geotechnical field and laboratory testing checks soil and subsurface conditions during investigation, design, and construction. Edmonton and regional project teams use that information for foundations, roadways, industrial sites, and oil and gas infrastructure planning.
Northern oil and gas completion moves often need lifting, hauling, and dispatch handled together. J.D.A. Ventures Ltd. runs Cranes-Truck Mounted service, trucking, heavy haul, and hotshot transport from Grande Prairie, Whitecourt, and Fort Saint John.
We serve Alberta, Northern BC, and the Territories with 24 hour crane and trucking availability. The same dispatch path can handle an industrial taxi run, a heavy haul move, or crane-backed construction support.
Since 1986, our locally owned team has supported oil and gas completion activity, industrial sites, construction, and maintenance needs. Each move is planned around load size, road access, and the field schedule.
Our Grande Prairie base connects northern projects with truck-mounted crane capacity and transport planning for equipment, materials, and site support.
Remote industrial assets in the Yukon need repair options close to Whitehorse, not a long wait for southern shop capacity. Jacob's Industries Ltd runs machining, welding, and hydraulic-cylinder repair from Whitehorse for industrial and heavy equipment needs.
We have served the Yukon since 1943 with machinists, welders, and heavy equipment mechanics on staff. The shop handles repairs, rebuilds, and fabricated solutions when northern conditions make turnaround and local parts access part of the job.
Hydraulic cylinders, bearings, seals, industrial supplies, and steel materials connect the repair path to the parts a field asset may need. Gas, electric, and hard-facing supplies are also available when welding or wear repair has to stand up to northern service.
Velocity Hydrovac Services Ltd. provides hydrovac excavation from Red Deer across Central Alberta and beyond. We work on utility exposure, pipeline crossings, and precision digging where controlled excavation keeps ground disturbance low.
Our hydrovac trucks use water and vacuum excavation to expose ground conditions with less disturbance than a backhoe. That makes daylighting safer around buried utilities and gives us a cleaner way to open pile holes, post holes, and trench lines when mechanical excavation would remove too much soil.
Since 2006, we have supported underground utility construction for municipalities, oilfields, and utility companies. We bring that experience to jobs with tight access, changing soil, and buried lines that need careful exposure before the next phase starts.
(ACR) is an award-winning full-service equipment rental company with (9) convenient locations. ACR was formed in 2009 when the CAT Rental store in Drayton Valley was purchased by an investors group made up of current ACR employees and several local business owners. That group had one vision for ACR, to become an industry leader in equipment rentals by offering an unmatched customer service with reliable equipment, and that vision is being realized more and more each day. ACR started off as a small rental store offering a limited range of equipment, but with hard work and determination, it has grown its fleet of equipment and is now considered one of the premier rental stores in western Canada.
Building Dreams, Creating Spaces We provide expert construction, renovation, and maintenance services tailored to bring your vision to life on time, on budget, and with unmatched quality. Contact Us About Our Company Every company has a beginning, but ours was built on passion and purpose. There’s a reason our clients trust us and it all Based in Swift Current, SK.
We build and maintain oilfield and pipeline sites from Wainwright across East Central Alberta and West Central Saskatchewan. Jaws Contracting Ltd stays on the job from construction through maintenance and pressure testing, so the same crew can carry the job from build to upkeep.
When a pipeline job moves from install to upkeep, we stay with the same site plan. Our field teams handle pressure testing, welding, and fabrication for the pieces that have to fit and hold together.
We also take on pumps and hoses when the project needs equipment support. Fencing and grading keep access and the job area ready. Hot shot work and safety training round out the field support around the same job.
Family owned since our inauguration, the core values of commitment, accountability, and excellence have endured. Dee-Jay is a growing, forward thinking company whose services are always adapting to our dynamic industry. We emphasize pre-planning, BIM modelling, VDC, and are detail oriented so we know what we are doing before we start any construction project, big or small.
In Lacombe, JC Drilling Waterwell Drilling builds water well drilling projects around the property, ground conditions, and pressure system that will use the well every day. Our Water Well Drilling service is set up for local sites and nearby central Alberta communities.
We use cable tool drilling for waterwell drilling projects. That method gives us a practical way to build wells for properties that need a steady water source and a service team close enough for later maintenance.
Pump work is part of the same water system. We install pumps, repair pumps, and set up pressure systems when a well needs reliable flow after drilling or repair.
Water Well Testing and water well repair help confirm performance before a customer depends on the system. Based in Lacombe, we also serve Rocky Mountain, Settler, and Wetaskiwin areas for drilling and maintenance needs.
High-pressure iron has to be tested, recorded, and returned with clear compliance data. JC Inspections and Valve Service performs pressure testing, valve repair, and high-pressure iron recertification from Lloydminster for oilfield customers across North America.
We were founded in 2017 with a focus on oilfield products and technologies that keep customers safe and compliant with industry standards. Inspection and recertification needs drive the job when pressure failure can stop a site.
Our mobile hydrotesting units use data logging electronics for precise records. That field capability keeps pressure testing close to oilfield iron and valve assets.
With over 15 years of experience, we prioritize safety, efficiency, and environmental stewardship, ensuring our clients receive exceptional value and service. Our team is committed to meeting your needs and exceeding your expectations every step of the. Experience the difference with Elite Oilfield Services Their commitment to excellence and customer satisfaction sets them apart in the industry, ensuring reliable and top-notch heavy equipment solutions. 6 3 shack 6 1/21 What Sets Us Apart Elite Oilfield Services LTD offers a wide range of heavy equipment solutions tailored to meet the diverse needs of the oil and gas sector.
Welcome to our website. We look forward to assisting you in your search for the perfect business that suits your needs. J.D. Haggart Contracting Ltd. believes we are that business. Our customer service, combined with our pricing, is unmatched by any competitor. Based in Carrot Creek, AB.
As we began to research this remarkable phenomenon, we discovered this growing trend was occurring because current special needs infrastructure was clearly not meeting the unique needs of a ‘dependent’ or non self-reliant population. In early 2004, Genesis Medi Shuttle Inc. was established and began bridging many of these gaps by incorporating a very practical and innovative solution to meet the needs of a very unique and rapidly emerging group. We believe that our model was one of the first in western Canada to utilize late model minivans that have been professionally converted to accommodate a full sized stretcher by a DOT approved adaptive vehicle conversion specialist.
A field move around Grande Prairie needs trucks, equipment, and timing that match the site. Jenn Trucking Ltd. handles rig-moving and trucking for oilfield and industrial customers across the Peace Country, with 24 hour dispatch available when schedules change.
We move freight, support hot shot runs, and supply rental equipment when the job needs extra field capacity. Our team also handles snow removal, which helps keep yards, leases, and access points workable through northern Alberta winter conditions.
Safety guides how we plan each haul and site task. Our approach is simple: no job is worth doing unless it can be done safely.
For rig-moving, trucking, hot shot, rental equipment, or snow removal in the Grande Prairie area, our dispatch line is set up for field planning and time-sensitive service needs.
In 2017, Jerry retired and sold his business to Shane Warnick and his wife, Teresa. Since then, Shane has re-established the fabrication shop, as well as expanded the business to include custom metal cutting using a CNC Plasma Table. The most recent addition, a 90,000 psi waterjet, further increases our custom cutting capabilities, allowing us to cut virtually any material. This expansion, combined with our friendly and professional staff, sets Jerry’s Welding Supply apart from the competition.
Jet-Lube of Canada is the Edmonton-based Canadian division of Jet-Lube, a global manufacturer of thread compounds, lubricants, and sealants for the oil and gas industry. Their products protect critical threaded connections on drill pipe, casing, and wellhead equipment under extreme downhole conditions.
Serving Grande Prairie and the Peace Country since 1984, our family-owned dealership has over 30 years of experience in helping customers drive away happy. Community Builders If there’s one thing we believe in, it’s that good deeds bring good things to everybody. We’re active supporters of our community, and believe in supporting local charities, non-profits and worthy causes. When you buy a vehicle from Hansen Ford, you’re not just supporting us – you’re building your community.
Fleet Management and Capital Solutions - Jim Peplinski Capital Where Fleet Meets Finance Financing solutions for your fleet and equipment needs. Speak to a fleet expert Speak to a finance expert Speak with fleet experts. Flexible financing solutions. Unlock the full potential of your fleet without these common experiences.
Jim-Bob Pipelines Ltd is best understood through the customer job behind flowback assets around Lethbridge, AB. The nearby scope includes rental planning and waste management. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our flowback assets scope starts with the condition of the asset. It can support flowback and production jobs with purpose-built assets. The rental planning side helps customers cover a short-term job need without buying the asset. For customers in Lethbridge, AB, that means fewer vague calls and a better start for quoting or planning.
With waste management, the important details are fit, access, timing, and handoff. That capability helps customers handle waste and disposal needs before they slow the site. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move.
Flowback assets changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes oil and gas. That keeps the page close to the source facts without drifting into broad claims.
A narrow service label is rarely enough on its own. The stronger question is what has to be built, repaired, checked, moved, or kept online. We use flowback assets as the anchor and bring in rental planning where it helps define the next step in Lethbridge, AB.
The practical benefit is less confusion at the start of the job. When flowback assets is explained through real use cases, the customer can ask a sharper question and avoid sending the request to the wrong place. Rental planning gives that request a related path when the first issue turns into a part or repair question. Around Lethbridge, AB, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope.
The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use flowback assets as the anchor, then bring in rental planning where it helps clarify the next step. That keeps the path helpful without adding a loose series.
The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with flowback assets and then connecting it to rental planning and waste management keeps that conversation anchored. This scope connects to oil and gas. Listed as established in 1976, the operation also has a continuity signal for repeat local purchasing. Around Lethbridge, AB, we describe the scope a customer can discuss and the operating setting it fits. Planning stays clearer when flowback assets remains close to rental planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Lethbridge, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use flowback assets as the anchor, then bring in rental planning where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether flowback assets belongs in the first call. They can also see when rental planning should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when flowback assets remains close to rental planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Lethbridge, AB sets the local context without turning the description into a street-address block.
Jimbob Rentals Ltd ties flowback assets to a real job condition around Rocky Mountain House, AB. The nearby scope includes rental planning and waste management. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our flowback assets scope starts with the condition of the asset. It can support flowback and production jobs with purpose-built assets. The rental planning side helps customers cover a short-term job need without buying the asset. For customers in Rocky Mountain House, AB, that means fewer vague calls and a better start for quoting or planning.
With waste management, the important details are fit, access, timing, and handoff. That capability helps customers handle waste and disposal needs before they slow the site. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Flowback assets is easier to judge when the market context is clear. The source material points to oil and gas. That gives the capability a real operating frame instead of a generic industrial label.
Most industrial calls start with something practical. A part has to be made. A unit has to be checked. A system has to keep running. We frame flowback assets with rental planning so the next step can be tied to the asset, timing, and site condition. In Rocky Mountain House, AB, that may mean a shop visit, a branch conversation, a field dispatch, or a quote request tied to a real job.
This kind of detail also reduces handoff risk. If the first call is about flowback assets, the customer can still see when rental planning belongs in the same discussion. Rocky Mountain House, AB adds the local planning layer, especially when timing, access, or branch response affects the job. That keeps the request from bouncing between unrelated categories.
The detail should also help a customer decide what to do next. A person can check whether flowback assets belongs in the first call. They can also see when rental planning should be part of the same conversation. That keeps the path practical without adding sectors that do not belong.
A good close should leave the customer with a practical next conversation. That starts with flowback assets and may extend into rental planning and waste management. This scope connects to oil and gas. Listed as established in 1976, the operation also has a continuity signal for repeat local purchasing. Rocky Mountain House, AB gives the location context without copying a full address. The next move should be clear: ask about the service, the asset, the timing, or the quote path. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use flowback assets as the anchor, then bring in rental planning where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether flowback assets belongs in the first call. They can also see when rental planning should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when flowback assets remains close to rental planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Rocky Mountain House, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use flowback assets as the anchor, then bring in rental planning where it helps clarify the next step. That keeps the path helpful without adding a loose series.
John Crane Stoney Creek starts the job conversation with design around Edmonton, AB. The nearby scope includes engineering, lifting and compression. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our design scope starts with the condition of the asset. It can move a rough need into a practical build path. The engineering side helps customers turn requirements into buildable technical choices. For customers in Edmonton, AB, that means fewer vague calls and a better start for quoting or planning.
With lifting, the important details are fit, access, timing, and handoff. It can lift and place loads with controlled access. The compression side helps customers connect the request to the job condition and next decision. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move.
Pump work works best when it is tied to the way the job will be installed or repaired. That capability helps customers match fluid movement and repair choices to the site. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
The service conversation should move quickly from label to task. With design and engineering, that means naming the asset, the failure point, the supply need, or the site condition early. Around Edmonton, AB, that keeps the request grounded in the place where the job will actually happen.
The value is not just in naming design. It is in showing how the scope connects to an asset, location, or schedule. Engineering gives the customer another route when the first need changes. That makes the page more helpful without turning it into a long service series.
Planning stays clearer when design remains close to engineering. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Edmonton, AB sets the local context without turning the description into a street-address block.
The final test is whether the service path feels clear. Design, engineering, lifting and compression should point to a real job discussion, not a category dump. In Edmonton, AB, that means connecting the capability to a branch, shop, field, or project decision the customer can act on. The detail should also help a customer decide what to do next. A person can check whether design belongs in the first call. They can also see when engineering should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when design remains close to engineering. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Edmonton, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use design as the anchor, then bring in engineering where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether design belongs in the first call. They can also see when engineering should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use design as the anchor, then bring in engineering where it helps clarify the next step. That keeps the path helpful without adding a loose series.
Buildings hold heat or lose it based on how well the insulation behind the walls was chosen and installed. From our Calgary base, we are the Canadian arm of Johns Manville, and we bring fiberglass, mineral wool, and blow-in insulation products to projects across Alberta and beyond.
Our batts and loose-fill lines go into homes, commercial buildings, and industrial facilities where thermal performance and fire resistance both count. We were early to formaldehyde-free fiberglass, using a plant-based binder that cuts cleaner and creates less dust on the job, which helps the trades handling it every day.
We also carry foam board and mineral wool made from basalt fibre for spaces that need a tougher rating. Builders in Calgary reach us through local supply partners, with delivery usually scheduled within a couple of business days. Whether the job is an attic retrofit, a new roof assembly, or a large mechanical space, we help match the right product to the wall, deck, or cavity so the finished building stays efficient for years.
This website you are visiting is intended to introduce you to our company, a business built on a reputation for Quality and a culture for Customer Service. Our goal is to educate our visitors that investment castings offer a unique, versatile, and innovative manufacturing process based on the concept that flowing and solidifying metal into near-net shapes can offer the best and most cost effective solution for highly detailed metal components. Our castings can provide exceptional benefits when compared to traditionally more restrictive and expensive alternate processes, such as machining from solid, assemblies, forgings, and many other manufacturing processes. Niagara Investment Castings has been located in the beautiful Niagara Region since our inception.
Complex Alberta wells need drilling plans that match pressure, length, and formation risk. Jomax Drilling (1988) Ltd is a drilling contractor based in Edmonton, with oil and gas experience that includes HPHT wells, 3000 metre plus monobore wells, and multilateral work.
Our drilling history reaches back to 1972. The source also names Leduc and Belloy disposal wells and geothermal wells, which shows the type of specialty drilling work we take on when a standard well plan is not enough.
Safety is built into how we run drilling work. The source states that our safety record reflects strict standards and a commitment to protecting employees and contractors.
For Alberta drilling-contractor projects that involve long reach, high pressure, disposal, multilateral, or geothermal well requirements, our Edmonton team plans around the technical limits of the well program.
Our high quality workmanship is our top priority and it speaks for itself along with friendly customer service. Be sure to check out our gallery to view some of our work. Treat your vehicle with the attention it deserves and give us a call or stop by for a free consultation with JR today. Welcome to JR’s Auto Detailing, where quality meets reliability.
Wide selection of quality parts – Find exactly what you need. We have an extensive inventory of high-quality auto parts and accessories. Whether you need replacement parts or upgrades, we have the parts you need to keep your vehicle running smoothly. Expert staff – Get the right advice for your vehicle.
Industrial, marine, and offshore sites need life safety systems and measurement instruments that can be planned, installed, and serviced by one technical group. K & D Pratt works from Atlantic Canada with life safety, instrumentation, technical services, offshore, coatings, and sanitation divisions.
Our instrumentation team works across flow, level, pressure, analytics, temperature, recording, and digital communications. These systems help industrial processes measure conditions and keep control decisions tied to real field data.
Life safety is a separate core service for high-risk environments. We handle tools, clothing, escape devices, fire suppression, alarm systems, and evacuation systems for industrial, marine, and offshore settings.
We have served Canadian clients for more than 100 years, with roots in fire safety and service dating to 1922. Our Dartmouth location connects with technical contacts across life safety, instrumentation, technical services, sanitation, and industrial solutions.
K & D Pratt plans supply, installation, and service around site risk, operating environment, and the technical system involved, from offshore safety equipment to plant instrumentation.
Casing running around Lloydminster needs controlled make-up, clean threads, and equipment that stays in step with the service rig. K & S Power Tongs Ltd runs conventional and integral power tong services for Alberta and Saskatchewan oil and gas work.
We pair the tong fleet with computer torque-turn systems and Volant casing running tools. Power thread washing and thread inspection stay part of the same workflow, so the job moves from make-up to check-out without extra handoffs.
When the spread needs more than tong service, our Lloydminster shop runs handling equipment rentals and light oilfield hauling. The 24-hour dispatch line stays ready for casing programs that run on timing and field access.
. Western Electrical Management provides commercial electrical contracting services in western Canada and woldwide from its offices in Calgary and Edmonton since 1959. Western Electrical Management Ltd. has been providing commercial electrical contracting services in western Canada from its offices in Calgary and Edmonton since 1959. Western Electrical is committed to providing electrical services of the highest quality.
For 20+ years, KTM Rentals & Sales has been Central Alberta’s trusted trailer and equipment dealer. Shop or rent trailers, ATVs, UTVs & snowmobiles. Based in Blackfalds, AB.
That’s exactly what Brian and Stacey did in 2020 when they founded Black Sheep Heavy Duty in Central Alberta. Driven by decades of experience and the need to adapt, their family took a chance and built a thriving specialized equipment repair shop. From operating his own business in 2000 to working through the Alberta oil boom, heavy-duty repair has always been his passion. Stacey, with 17 years in administrative roles and valuable experience as a home care aide, seamlessly transitioned into running the office, bringing warmth and efficiency to customer interactions.
Oilfield drilling and service work depends on pressure, weight, torque, and depth readings that can be read in real time. Kane Instrumentation Ltd works from Edmonton with instrumentation for mud pressure, weight indicator, torque measurement, chart recorder, and depth measurement applications.
We supply oilfield instrumentation tied to rigs, wireline work, pressure testing, and control-air equipment. The product scope includes gauges, meters, valves, pumps, air compressors, and hose test pressure panels where measurement and control have to line up with the job.
Safety-related tools are part of the same field package when the application calls for them. Self-retracting lifelines and shear cable cutters sit beside pressure and measurement products because oilfield work often needs instrumentation and site safety equipment planned together.
Kane Instrumentation has operated from Edmonton since 2002, with stated oil patch instrumentation knowledge across the team. Our focus stays on the instrument, the pressure range, and the field application it has to serve.
