A wellsite route, creek crossing, or spill area can create environmental risk before construction or cleanup begins. EverGreen Enviro Corp. handles environmental audits, environmental monitoring, reclamation, remediation, and waste management from Carlyle, Saskatchewan for upstream oil and gas work.
We help plan flowline routes, creek crossings, well sites, and access locations on government and private land. That field planning includes forested areas, prairie grasslands, and cultivated land where route choice affects disturbance, approvals, and reclamation needs.
Our environmental testing work includes water well testing and gas migration testing. We also complete impact assessments, site audits, wildlife and vegetation risk evaluations, and environmental site supervision for projects that need field evidence before the next decision.
Spill response and closure work require a practical remediation plan. We develop salt and oil spill remediation programs, supervise field activities, manage drilling waste requirements, and plan reclamation so the site can move toward accepted land condition.
Trusted defense partner delivering advanced marine power, propulsion, and manufacturing solutions for the U.S. Navy and beyond. Discover what drives FMD. Based in Montreal, Cochrane, AB.
Air leaks and low insulation value can make Southern Alberta buildings harder to heat and harder to finish well. Fairfield Foams installs spray foam insulation from Brooks, including closed-cell foam for building envelopes that need higher R-value per inch and an airtight seal.
We plan foam insulation work from early project review through installation and follow-up. Closed-cell spray foam can also add wall stiffness and resist mold, which makes it a practical choice for demanding building conditions.
Our urethane and foam work also includes bedliner applications using a polyurea and polyurethane blend. That coating creates a durable, slip-resistant finish for truck beds exposed to weather and daily use.
For insulation-foam or urethane coating work around Brooks and Southern Alberta, our team focuses on the right material for the building surface, protection need, and local climate.
Oilfield moves around southeast Saskatchewan depend on bed trucks, pickers, winch trucks, and trailers being ready for the load. Fast Trucking Service Ltd runs that trucking fleet from Carnduff for rig-moving, construction support, and field hauling needs.
Our Carnduff base sits near active oil and gas work along the Saskatchewan and Manitoba border area. The fleet mix fits wellsite moves, equipment hauling, and construction jobs where lifting, winching, and trailer capacity all affect the schedule.
The source evidence also names welding, well servicing, and environmental service terms. We keep the main profile centered on trucking and rig-moving because the clearest supported proof is the operating fleet described on the official site.
For service planning, our Fast Lane location in Carnduff is the starting point for oilfield trucking calls that need bed truck, picker, winch truck, or trailer availability.
Firebird Oilfield Services Ltd gives customers a clearer starting point for repair planning around Grande Prairie, AB. The nearby scope includes fabrication, welding and insulation. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our repair planning scope starts with the condition of the asset. It can find the fault and choose a repair path. The fabrication side helps customers turn measurements and wear points into buildable parts. For customers in Grande Prairie, AB, that means fewer vague calls and a better start for quoting or planning.
With welding, the important details are fit, access, timing, and handoff. It can repair or modify metal when fit and access are tight. The insulation side helps customers connect the request to the job condition and next decision. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move.
Pipeline works best when it is tied to the way the job will be installed or repaired. That capability helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
Repair planning changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes oil and gas, custom work and maintenance. That keeps the page close to the source facts without drifting into broad claims.
Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect repair planning with fabrication so the request can move from a rough need into a clearer service discussion around Grande Prairie, AB.
The practical benefit is less confusion at the start of the job. When repair planning is explained through real use cases, the customer can ask a sharper question and avoid sending the request to the wrong place. Fabrication gives that request a related path when the first issue turns into a part or repair question. Around Grande Prairie, AB, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope.
The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with repair planning and then connecting it to fabrication, welding and insulation keeps that conversation anchored. This scope connects to oil and gas, custom work and maintenance. Listed as established in 1987, the operation also has a continuity signal for repeat local purchasing. Around Grande Prairie, AB, we describe the scope a customer can discuss and the operating setting it fits. Planning stays clearer when repair planning remains close to fabrication. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Grande Prairie, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in fabrication where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether repair planning belongs in the first call. They can also see when fabrication should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when repair planning remains close to fabrication. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Grande Prairie, AB sets the local context without turning the description into a street-address block.
FireFly Critical Well Safety Equipment is the international industry safety leader for critical sour gas well dual ignition systems for all drilling operations around the world, since 1986. Based in Red Deer, Red Deer, AB.
Hot valves, process piping, and engine exhaust systems need insulation that can be removed for service and put back in place. Firwin Corporation manufactures reusable insulation covers and insulation jackets from North York, ON for industrial and oil and gas applications.
We build removable insulation for valves, instruments, flanges, piping, diesel engines, gas powered generating stations, gensets, and off-road equipment. The goal is practical thermal control around assets that still need inspection or maintenance access.
Our main product lines include removable and reusable insulation blankets, Hard Coat composite insulation, and Metal Foil Insulation. Each product family is shaped for a different site need, such as durability, cleanability, or a permanent thermal barrier.
Oil and gas applications are supported through Firwin ThermoWrap, along with industrial insulation work for process and steam line components. Our North York manufacturing base handles custom insulation where standard covers do not match the asset shape or heat condition.
- Canada's Premier Flare system manufacturer : Flaretech Inc. (403) 742-2212 [email protected] Products Flare Systems Arrestors Ignition Systems all products Case Studies Self Supporting Air-Assisted Flare Stack 24” x 42” x 145’ tall Self Supporting Air-Assisted Flare Stack FlareTech designed and manufactured this 100 mmscfd Self Supporting. . With this experience, we have fine tuned and developed one of the highest quality flare systems in the business that perform in the harshest of environments.
Echo Fluid Levels Ltd provides Production Optimization, Fluid Level-Determination services to oil and gas operators in Drayton Valley, AB and across Western Canada.
Together we entered the spray foam and fireproofing industry traveling across Alberta, discovering the prairies through the windscreen of a three ton truck. For two young guns the work was unbeatable; each job was different, physical, and, at times, challenging. We approached each project like a puzzle, listening to our customers concerns and providing solutions. Meeting and engaging with our customers quickly became the best part of our job.
Welcome to Calgary Outlink. Access peer support, education, and opportunities for connection with 2SLGBTQIA+ and allied communities in Calgary, Alberta.
FTCA manufactures custom-fit industrial insulation jackets that protect your pipeline equipment from freezing and shield your workers from extreme heat. Producing up to 100 jackets daily from their Edmonton facility using fiberglass, closed cell foam, and ceramic fiber materials rated for the harshest operating conditions. When off-the-shelf insulation does not fit, FTCA builds exactly what you need.
Well integrity issues can shut in production and complicate abandonment plans. Performance Energy Services handles remedial cementing and well servicing for oilfield wells across Alberta and Saskatchewan.
We focus on cement placement jobs that correct isolation, seal problem intervals, and set up the next field step.
Our field planning centers on pressure control, pumping requirements, and site access for active wells and legacy wells alike.
From Alberta, we plan remedial cementing scopes around Western Canada well conditions.
Heat loss in piping, tanks, and oilfield buildings can raise costs and slow site performance. G & R Insulating installs mechanical pipe insulation from the Grande Prairie area for oil and gas projects in Alberta and British Columbia.
We work on mechanical piping, vessels and tanks, utilidors, and reusable insulation covers where temperature control is part of the job. Our insulation work is built around energy efficiency, heat retention, and access to the equipment after installation.
Some sites need access before insulation can be installed or repaired. Our scaffolding team handles assembly, modification, and dismantling for industrial projects, so insulation and maintenance work can be planned around the same work area.
We also install glycol heat tracing systems and oilfield buildings for related field needs. Our Western Canada service area is built around oil and gas facilities, production sites, and mechanical projects that need insulation planned with site conditions in mind.
Gallagher Energy Risk is a Calgary-based specialty insurance brokerage focused exclusively on the energy sector, providing customized risk management and insurance programs for oil and gas operations. From well control and pollution liability to property and casualty coverage, they leverage deep industry expertise to protect energy companies against their most critical exposures.
A rig decision is partly about the iron and partly about whether quality and safety stay steady as the job changes. Galleon Well Servicing Inc. works from Drayton Valley as a service rig provider for Western Canadian oil and gas activity.
We were founded in 2006 around mobile well service rigs, dedicated personnel, and customer care for exploration and production companies. The site positions Galleon around well-servicing operations rather than broad construction or unrelated field support.
Safety is part of the operating promise, not an add-on after mobilization. We publish a health and safety focus, HSE policy navigation, and a mission tied to meeting or exceeding regulated health, safety, and environmental standards.
For a Galleon request, the planning details are well location, rig timing, site access, job objective, and quality or safety requirements set by the customer. The public source confirms Western Canadian oil and gas rig work, while pricing, exact fleet count, and emergency availability are not published.
Garrison Oilwell Servicing Ltd is a Lloydminster, Saskatchewan-based service rig company specializing in well completions, workovers, and abandonments.
Oil wells in southeast Saskatchewan need free-standing service rigs that can move in and get the job done without extra delay. General Well Servicing Ltd runs that kind of well servicing from Carnduff.
Our rig fleet includes double-triple and double-double service rigs, built for workovers, maintenance access, and oilfield conditions around the local area.
Our history dates back to the late 1980s, when Tony Day bought a service rig to work over personally owned oil wells. That background still shapes a safe, practical approach to rig maintenance and the field decisions that come with each well.
Insulated buildings and panels have to handle weather, heat loss, and equipment access on working sites. Genfour Thermal Solutions Inc builds specialty thermal panels and insulation panel products in Edmonton for oil and gas, natural gas, construction, and plant applications.
We focus on panel-based insulation where the finished product has to be built around a real use case. Custom polyurethane panel enclosures can be made with doors and details matched to the customer need.
Our product line includes low-profile, heavy-duty heated units with 500 or 1000 gallon capacity, 120 V GFI heat tracing, forklift pockets, and optional alarms. Those details shape how insulated or heated equipment is moved, placed, and kept in service through Alberta conditions.
Genfour started in Edmonton in 2003 as a family-run business. Our shop serves mechanical insulation trades, agriculture, food processing, natural gas, storage, and thermal retrofit projects.
When a site needs an insulated enclosure, specialty panel, or heated field-ready product, our Edmonton fabrication team can shape the insulation package around access, capacity, and operating temperature.
Energy decisions get harder when well, land, production, and market data live in separate places. Geologic gives Calgary-based oil and gas teams an energy data and analytics platform for Canadian asset review, forecasting, and daily technical planning.
Our computer software is built around oil and gas data. Geoscientists, engineers, land teams, executives, and finance staff use our datasets and analytics to study wells, compare assets, and understand market changes before they commit capital.
We bring clarity to complex energy decisions by pairing software with industry data and insight. That means a Calgary office can review Canadian acquisition activity, reserve changes, production history, and energy trends through one data-driven workflow.
Service rig work is not supported by the current source evidence, so our profile should be read as energy data, analytics, and computer software. Our Calgary team can discuss the data coverage, analytics workflow, and forecasting needs behind oil and gas decisions.
SafeBlu, formerly Get Real Testing, has been a trusted provider of fire safety services in Strathmore and Calgary since 2003. They offer fire extinguisher inspection, fire suppression systems, drug and alcohol testing, and safety services for the oil and gas industry.
Spray foam insulation has to match the substrate and the setting. Giberson Brothers Insulators works from the Spruce Grove and Edmonton area on industrial facility insulation and fire protection projects across Western Canada.
We specialize in spray foam for construction and energy sites, with fire protection added where access and finish quality shape the result. That scope can fit small repairs or larger industrial builds.
With more than three decades of experience, our team has contributed to Western Canada construction and energy projects. We bring the tools and installation knowledge needed for insulation that has to hold up in service.
Global Well Servicing - An Alberta Oil Well Servicing Company ABOUT Global Well Servicing Ltd. management prides itself on the service it is able to provide. We are able to operate at 100% utilization and still provide high-quality workers. We have achieved this by having a strong family-orientated workforce; our people are professional and take pride in their equipment and work.
A well servicing program loses time when rig availability, setup needs, and safe execution are unclear. Global Well Servicing Ltd runs service rigs from Drayton Valley for Alberta oil and gas wells, with 19 vertical rigs built for active field programs.
We focus on well servicing where the rig plan affects production timing, repair scope, access, and site movement. Each job has to be planned around the well, the location, the equipment move, and the controls needed from arrival through teardown.
A vertical service rig fleet gives us depth for scheduled maintenance and changing field needs. When a well program shifts, rig availability and location timing become part of the operating decision.
Our Drayton Valley office handles service rig availability discussions for Alberta well servicing work. The practical starting point is the well, location, timing, and job requirement tied to the field program.
With a commitment to safety, performance and dependability, Grant PTS is an industry leader in oilfield well-testing services. Based in Calgary, Calgary, AB.
Greywolf Production Systems Inc provides Coiled Tubing Service, Production Testing, Gas Well Testing services to oil and gas operators in Crossfield, AB and across Western Canada.
At Grimes Well Servicing Ltd., we enjoy working with our customers on the safe and efficient execution of their programs. We provide state-of-the-art equipment, innovative people, while maintaining our safety and environmental goals as a priority.We have always taken pride in applying our people and Based in EDMONTON, Fort St John, BC.
Midstream assets connect field production to processing, storage, and market access. GTG Energy Systems operates from Calgary with core energy infrastructure across Central and Southern Alberta, including contracted pipeline assets and trucking-linked terminal capacity.
Our focus is natural gas gathering, processing, fractionation, and rail loading within the Central Alberta Basin. These assets serve oil and gas movements where pipeline connections, plant capacity, storage, and terminal access have to work as one operating system.
BTG Energy targets midstream investments in pipelines, storage, processing and fractionation facilities, plus rail-and-trucking terminals. That asset base gives our Calgary team a clear role in Alberta energy infrastructure rather than one-off field service work.
We operate with attention to safety, environmental stewardship, and long-term community relationships in the areas where our midstream assets are located.
Industrial buildings, ships, and refineries need insulation and protective coatings that stand up to heat, moisture, corrosion, and shutdown schedules. From Dartmouth, Guildfords Inc. handles insulation, protective coatings, and specialty construction across Atlantic Canada for industrial, commercial, and marine projects.
We bring trade depth to jobs where one scope affects the next. Insulation, sheet metal, passive fire protection, and abatement can be planned together so a facility, vessel, or refinery project moves through field access, containment, and installation with fewer gaps.
Our history gives us a long view of industrial service. Guildfords traces its roots through more than 115 years of experience, over 250 team members, and more than 25,000 completed projects. In 2020, Guildfords combined Guild Contracting, Dover Insulation, Scotia Sheet Metal, and MSM Construction into one operating group.
We also manufacture and apply insulation products for commercial and industrial settings. That shop and field base helps us plan thermal, envelope, coating, and sheet metal work around site conditions in Atlantic Canada.
Rust, old coating, and surface contamination can shorten the life of steel before a coating system ever goes on. H & A Industrial Painting Ltd handles abrasive blasting and coatings in Red Deer for pipelines, plant equipment, steel structures, bridges, tanks, and vessel exteriors.
Our sandblasting work prepares surfaces for coating by removing paint, rust, and existing finish from pipe, equipment, and structural steel. We can complete blasting in the field or in shop when project access and handling needs call for it.
External coatings and painting are built around the asset. We coat above-ground pipe, spools, plant steel, concrete surfaces, and equipment where coating performance depends on surface profile and clean preparation.
Red Deer sites use our blasting and coating services for maintenance, construction, and repair scopes where finish quality affects corrosion control and service life.
HM Power Systems offers: Kohler generators large & small - Sales & service for Kubota industrial engines - Marine engine diagnostics & repair - Much more! Based in Fort St John, BC.
Metalworking lines need lubricants that keep forming, drawing, and machining steps consistent. H.L. Blachford Ltd manufactures industrial lubricants, greases, additives, and rubber processing aids from Mississauga for manufacturers that run high-volume production equipment.
We build chemistry for metalworking, rubber processing, PVC, and specialty manufacturing. In energy supply chains, that can mean lubricants for fabricated parts, rubber processing aids for industrial components, or private-label products for plants and distributors.
Our history goes back to 1921, and our products are used by OEMs in more than 30 countries. We also supply dispensing and application equipment so fluids are applied in a controlled way on the shop floor.
For lubricant selection, packaging, or application equipment, our Mississauga team can match the product family to the process, material, and production setting.
With a focus on safety, innovation, and quality, they deliver exceptional results in the industry. Who We Are The Hall Group of Companies is a reputable and experienced organization, known for our commitment to excellence, integrity, and customer satisfaction. We offer a wide range of industry-leading services with a proven track record of success. Leadership The Hall Group of Companies is led by a visionary and experienced leadership team that embodies integrity, innovation, and strategic thinking.
A producing well can lose efficiency when fluid levels, pump performance, or downhole conditions are not measured clearly. Hamdon Energy Solutions works from Edmonton in Production Optimization, Bottomhole Pressure Surveys, Dynamometers, and Fluid Level-Determination for upstream oil and gas clients in Canada and abroad.
Since 1996, we have supplied measurement instruments and well testing technology for drilling, completion, and production decisions. These tools help define what is happening in the well before repair, adjustment, or regulatory action is planned.
Our service team also handles equipment training, equipment repair, regulatory compliance, and optimization service. Training Services are tied to the instruments and field methods our clients use, so the measurement process stays practical at the wellsite and in the shop.
Hamdon Energy Solutions also works with Cementing Equipment, Mud-related applications, and production optimization products when those needs connect to upstream well efficiency. Our Edmonton base supports field service, repair planning, and instrument supply for oil and gas operations that need accurate measurement before the next step.
