ABCO Supply & Service supports industrial facilities from Winnipeg with the trades needed to install, repair, and maintain process systems, building services, and production equipment.
Established in 1972, ABCO brings process piping, equipment installation, electrical work, instrumentation, controls, gas fitting, refrigeration, plumbing, and millwrighting under one Winnipeg contractor. On plant or shop projects, one change can touch several trades before the system is safe to put back into service.
The service range covers fabrication, installation, testing, and commissioning of process components, along with preventative millwright maintenance, automation and measurement work, industrial refrigeration, plumbing systems, and qualified gas-fitting support. ABCO also emphasizes training, safety, and procedure review, which helps industrial work move through site requirements without treating compliance as an afterthought.
For facility upgrades, process-piping work, refrigeration service, or multi-trade maintenance around Western Canadian plant environments, ABCO can start with the project scope, the trades required, and the equipment being tied in.
Alignment problems can shorten equipment life, slow shutdowns, and create repeat failures after installation. Align-Tech Industries provides millwright contracting, machinery installation, laser alignment, optical alignment, and 3D metrology from Edmonton for manufacturing and industrial customers across Canada and abroad.
We support millwright services, machinery installation, laser alignment, optical alignment, laser tracker work, 3D metrology, shutdown support, precision equipment alignment, and industrial measurement. ISNetworld approval, laser trackers, optical alignment tools, and 3D metrology equipment show the work is built around measured precision rather than visual alignment alone.
Align-Tech is useful on oilfield facilities, plants, and rotating-equipment projects where installation accuracy and alignment data affect uptime and reliability.
Millwright service for compressors, turbines and pumps has to match the outage window, access limits and restart timing. BuLa Millwrights works from Blackfalds for oil and gas refining, pipeline, mining and power generation facilities.
We install, repair and maintain rotating machinery such as compressors, turbines and pumps.
Commissioning, start-ups and turnarounds keep the machinery plan tied to the date the facility has to run again. Conveyor work and plant maintenance can be added when the same site needs millwright support across more than one operating area.
Since 2001, our Blackfalds team has focused on rotating machinery installation and maintenance for specialized industrial facilities that cannot treat downtime as routine.
Offshore oil and gas fabrication needs traceable shop process, steady quality control, and a location close to Newfoundland and Labrador project activity. C & W Offshore focuses on carbon steel fabrication at our Mount Pearl facility for offshore oil and gas and related industrial design-build needs.
We were incorporated in December 2004 to serve companies involved in the Newfoundland and Labrador offshore oil and gas industry. Our fabrication work is built around carbon steel structures, project support, and practical shop execution.
Fabricators, Millwrights, and Welding needs often meet on the same offshore package. Our Mount Pearl team handles fabrication and associated support services where built components, repair planning, and field-readiness have to line up before the asset goes offshore.
C & W Offshore is Newfoundland and Labrador owned and operated. Our facility-based fabrication service gives offshore oil and gas projects a local shop for carbon steel work, design-build solutions, and quote planning tied to the Mount Pearl area.
We handle oilfield construction and maintenance from Whitecourt across North Central Alberta.
Our team covers pipeline construction, hydrovac, and site remediation. We also repair gas engines, compressors, and rotating equipment for oil and gas sites.
In our shop and field team, we bring welding and millwright service to plant expansions and turnarounds.
We handle compressor and pump solutions from our Grande Prairie base.
Our team works on industrial compressors and pumps with maintenance, inspection and OEM parts support. We also bring millwrights, electricians and heavy-duty mechanics to the job.
That keeps our response practical across Western Canada.
Industrial air compressor repair and pump service become urgent when compressed air or fluid movement starts affecting plant production. Chamco Industries works across Western Canada on compressor solutions, pump service and nitrogen generator supply.
Our compressor offering supports facilities that need dependable air systems for production, maintenance and process needs.
Pump and compressor service can happen in the field or through one of our six Western Canadian service centres. Parts, repair planning and replacement conversations stay tied to the asset instead of being treated like a catalog order.
Since 1962, we have worked with compressor and pump systems for industrial facilities. Our Western Canada network keeps compressor repair, pump support and nitrogen generation close to the sites that depend on them.
We are the proud recipient of the Eagle Feather Business Award of Distinction category of the Alberta Business Awards of Distinction for demonstrating outstanding achievement in business and incorporating entrepreneurial and cultural concepts into our operations for long term success. We would have never been able to do this without past or present employees who strive each day to help build a foundation of SUCCESS. We are a proud member of the Canadian Council of Aboriginal Business (CCAB). We are dedicated to our customers and work hard to maintain fairness and earn loyalty by providing a high level of service with a strong commitment to safety.
Our fleet of service trucks provide mechanical, electrical & instrumentation, proving, construction, maintenance services, and repairs across all BC, Alberta and Saskatchewan. Our fully stocked and maintained parts warehouse, with over 15,000 sku’s is available 24/7/365 in case of emergency. We are committed to providing our customers with an expert level of service for all your construction, turnaround and maintenance requirements. Our goal is to exceed your expectations by providing a diverse and highly experience team who will ensure your projects and services are delivered cost effectively, on time and above standards.
At Croatia Industries Ltd, we machine and repair pump parts from our Saskatoon shop. Crane components and industrial facility parts follow the same custom-machine approach when a worn assembly has to return without a standard replacement.
We pair machining and welding with fabrication when a part no longer matches its original shape. Mechanical and millwright capability help move the repair through the next shop step without sending the part to several vendors.
Inspection tools and specialized machines help us handle one-off repairs and custom builds. More than 40 years of custom machine experience shapes the way we approach parts that depend on fit and function.
Delta Millwright Services established in 2004 provides the services of licensed millwrights servicing the industrial and manufacturing sectors in Edmonton and central Alberta. Based in Edmonton, Edmonton, AB.
Everflo utilizes fully equipped service trucks with V-Mac air systems, flat deck picker trucks, hotshot truck and various transport trailers. Our service's include Mobile Engine, Compressor and Pump Maintenance, including Alignments. Small equipment sales, rental and service as well as Auto and Marine repairs in our shop locations. Everflo Compression is COR / SECOR certified with Enform.
When a package loses compression, a starter quits, or a pumpjack is not coming back the way it should, the workday can move off schedule fast. We keep those moments from turning into longer shutdowns by offering 24-hour in-shop repair and mobile response from Rimbey, so the repair path stays practical when the unit cannot wait. We support the oil and gas industry with a setup that brings repairs and parts into the same workflow, which helps reduce the handoffs that usually add delay. That shows up when the real goal is getting a machine open and getting the operation back to a stable plan. Since we have been servicing the oil and gas industry since 2003, our work has been built around direct turnaround, field-ready coordination, and the kind of support that fits the pace of active production.
A lot of downtime begins with the smaller pieces that sit between a fault and a restart. We service air starters and compressor valves, and we keep in-stock exchange starters, turbos, and heads ready for jobs where waiting on a shipment would only make the outage longer. That lets us move from diagnosis to repair without forcing the whole schedule to stop for one missing component. We also keep gaskets, hoses, and other wear items tied to the repair process, because the best repair plan is often the one that can be completed without a second round of sourcing. When the parts path and the service path stay connected, it becomes easier to get a unit back into operation on the first pass.
Some equipment needs deeper work than a simple replacement. We provide maintenance and service for engines, compressors, gensets, and pumpjacks, and we handle engine overhauls, compressor overhauls, and CC40 overhauls when a unit needs more than a surface fix. Those jobs are about restoring dependable operation, not just clearing a fault. We approach them by looking closely at what the unit is actually doing, then matching the repair plan to the condition in front of us. That practical approach helps us keep the job grounded in the machine, the wear pattern, and the operating condition instead of treating every failure the same way. For customers, that means a clearer path back to service and fewer surprises once the unit is reopened.
We also support temporary capacity when the jobsite cannot afford to lose power or stall a task while permanent work is still underway. Our genset rentals give field teams a workable bridge during maintenance windows, remote work, or short-term outages. A rental can keep the next step moving while a repair or rebuild is still in progress, which is often the difference between a controlled plan and a scramble. Because we also supply parts, rentals and repairs can work together instead of forcing the customer to coordinate separate vendors for every piece of the job. That continuity shows up in field work, where the delay is rarely caused by one missing part alone. It usually comes from a chain of small interruptions, and we try to keep that chain short.
Machining, pressure equipment, and safety training round out the service model because readiness is not only about whether a machine runs. It is also about whether the unit is being handled correctly, inspected appropriately, and returned to work in a way that fits site expectations. Machining support helps when a component needs to be restored to a usable fit rather than replaced immediately. Pressure equipment support helps when the job involves systems that have to stay controlled and dependable. Safety training helps reinforce the habits that keep the repair path usable in the first place. We treat those capabilities as part of the same operational picture because production teams do not get value from isolated tasks. They get value from a repair plan that is organized, safe, and ready to move.
Our Rimbey base gives us a practical home for in-shop work, while our mobile response lets us respond when the better answer is to bring the service to the unit instead of moving the unit to us. That flexibility helps with field calls, planned maintenance, and units that need to return to service quickly. Repair and parts are coordinated around the machine and the outage. Rentals and machining can then support the same plan, giving the customer a practical path back to operation instead of a loose chain of vendors. If you need a team that can handle the unit, the parts, and the temporary support without turning the job into a maze of handoffs, we are ready to help from Rimbey and the surrounding oil and gas work environment.
A pump unit problem in the Bakken needs field repair, shop knowledge, and after-hours response before a small fault becomes lost production. Hank's Maintenance & Service works from Estevan on oil well maintenance, pump unit service, and industrial maintenance for oil and gas sites.
Our mechanical path is tied to pumps, clutches, seals, rotating equipment, millwright tasks, and welding around field assets. When vibration points to a developing failure, the maintenance plan can start before the outage grows.
For a Hank's request, the planning points are asset type, failure symptom, site location, access timing, and whether the repair needs field or shop attention. We keep the maintenance path tied to the machine creating the risk.
With 15 years of experience delivering quality service in machining, welding, mechanical & design - Kaymor is your one-stop-shop near Grande Prairie. Based in Clairmont, AB.
When an overhead crane or hoist is due for inspection, production can slow down fast. Lifting Equipment Ltd. in Calgary handles overhead crane and hoist inspections for oil and gas, industrial, and petrochemical sites across Alberta and Western Canada.
We also handle lifting-device service and equipment sales for the material handling gear that keeps shops and plants moving. Installation and engineering come into play when a crane or hoist needs more than inspection alone.
Our Calgary team plans crane and hoist work around plant access, shop schedules, and field windows across Western Canada.
Millwright Machine Corporation provides millwright services, welding, horizontal boring, and pressure testing from Cold Lake, Alberta, maintaining production equipment and facilities for heavy oil operators in the Cold Lake region.
Millwright Machine Corporation Grande Prairie provides machining, millwright services, horizontal boring, pressure testing, and welding from Grande Prairie, Alberta, maintaining oilfield production equipment in the Peace Country.
Severe mechanical issues often start at a bolted joint, pivot point, or fastening system that was not matched to the load. In Edmonton, Precision Bolting Ltd works with bolts and nuts, fasteners, and custom bolting products for challenging industrial applications.
We introduced a customized bolting solution kit for large mining trucks in 2007. That history shapes how we approach heavy equipment fastening problems where vibration, load, and repeated maintenance can affect uptime.
Our Edmonton production facility handles technical support, stocked inventory, and custom fasteners made from specialty materials. We also work with associated component manufacturing when a bolting solution needs more than a standard part.
Precision Bolting Ltd distributes SUPERBOLT Multi-Jackbolt Tensioners, NORD-LOCK Wedge Locking Washers, TAPER LINE Locking Products, EXPANDER Pivot Pins, BOLTIGHT Hydraulic Tensioners, and PBL Solutions. These product lines fit industrial maintenance, repair, and mechanical fastening jobs that need controlled tension, locking performance, or specialty hardware.
Randco Millwright Services Ltd provides Pumps-Water Disposal, Pumps-Centrifugal, Pumps-Fluid End Expendable, Pumps-Positive Displacement, Pumps-Progressive Cavity, Millwrights services to oil and gas operators in Grande Prairie, AB and across Western Canada.
A fabricated steel package still has to reach the site, stand up correctly, and fit the facility around it. South Central Welding Ltd works through South Central Industrial from Nanton on fabrication and erection, with millwright help plus crane and boom truck capability for industrial projects.
Our strongest evidence is the connected field-and-shop package. Fabrication builds the steel, erection and millwright service help place it into the area, and transport or lifting capability helps move the package without sending the project through unrelated suppliers.
For a Nanton industrial job, the planning points are the structure, lift need, transport path, site access, and millwright scope. We keep the conversation tied to how the fabricated piece gets built, moved, and installed.
Our mission is to be our client’s supplier of choice. We can only achieve this by building strong relationships and knowing our clients’ business. Our commitment is to supply our clients with products and service of the highest quality that meets and exceeds their needs. We are a modern facility located 1km south of Brooks.
Industrial material handling systems fail when alignment, drive components, or distributor parts are not maintained. Tundra Mechanical & Millwrighting handles Millwrights service from Warman, with operations in Saskatchewan and Manitoba for plants that move grain, waste, water, and bulk materials.
Our millwright team works on distributor inspection, service, and repair. We check spout alignment, barrel operation, and internal and external components so material handling equipment can return to planned service.
Fabrication and painting are handled with shop equipment built for blast and coating preparation. That shop capability supports repair projects where metal parts need to be cleaned, rebuilt, painted, and returned to industrial duty.
We have served Western Canada for 25 years and have supplied supervision for international projects in the Middle East, South America, and Asia. Our Warman millwright team plans material handling repairs and fabrication around plant access, shutdown timing, and equipment condition.
As a key contributor to the Canadian economy and its subsequent prosperity, we’re excited by the challenges and opportunities ahead. Thank you to our incredible clients and partners. YEARS' PROCESS SOLUTIONS SQUARE FOOT FACILITY SQUARE FOOT SERVICE CENTRE Located in Calgary, Alberta, Canada, a short drive from the beautiful Rocky Mountains, Welco offers a centralized location for supply and service to clients across Western Canada. With Technical Solutions Specialists in British Columbia, Alberta, Saskatchewan and Manitoba, Welco is able to provide fast, efficient and cost-effective process solutions for industrial mixing, moving and pumping applications.
We provide a collaborative approach to deliver projects that uphold the visions of the first nations peoples. We believe that quality design and construction management is at the heart of every project. Whether it’s the MTS Centre or the Human Rights Museum, Red River College or the Shoal Lake Water Treatment Plant, our design and construction teams have been successfully delivering complex projects for 45 years. We are continuously improving and adapting our processes to stay at the forefront of the construction industry.
A pump train failure can stop a plant, delay commissioning, or push maintenance cost into the next shift. Westpower works from Calgary and Edmonton on pumps and rotating equipment for industrial and pipeline facilities, with millwright and mechanical repair capacity around that core need.
Our strongest source-backed path follows rotating equipment through its life cycle. Selection and installation planning help before start-up, while repair, maintenance, optimization, and upgrades help keep pumps and mixers aligned with process demand.
For a Westpower request, the planning points are asset type, failure mode, site location, lifecycle stage, and whether the job needs shop repair or field activity. We keep the pump conversation tied to the operating problem instead of a general parts list.
