Remote fluid moves can slow a wellsite fast when hauling, pumps, and storage are planned separately. JD&C Services handles Kill Fluids and Water Hauling from Hinton, with service in the Hinton, Edson, Grande Cache, Jasper, and Fox Creek areas, plus satellite operations in Rocky Mountain House.
We move fluid for field jobs that need tank trucks, potable water delivery, fluid and chemical sales, and site-ready hauling. Our portable filter units and portable pumps are available for lease when a job needs temporary fluid handling without a permanent setup.
Hot shots to remote sites and field supervision help keep fluid work moving when access, timing, or distance creates pressure on the schedule. Our 24-hour dispatch line is part of that field-service model.
For western Alberta fluid hauling, our Hinton team can plan kill fluid movement, pump rental, water delivery, and tank support around the site location and job timing.
Jet-Lube of Canada is the Edmonton-based Canadian division of Jet-Lube, a global manufacturer of thread compounds, lubricants, and sealants for the oil and gas industry. Their products protect critical threaded connections on drill pipe, casing, and wellhead equipment under extreme downhole conditions.
John Crane Stoney Creek starts the job conversation with design around Edmonton, AB. The nearby scope includes engineering, lifting and compression. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our design scope starts with the condition of the asset. It can move a rough need into a practical build path. The engineering side helps customers turn requirements into buildable technical choices. For customers in Edmonton, AB, that means fewer vague calls and a better start for quoting or planning.
With lifting, the important details are fit, access, timing, and handoff. It can lift and place loads with controlled access. The compression side helps customers connect the request to the job condition and next decision. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move.
Pump work works best when it is tied to the way the job will be installed or repaired. That capability helps customers match fluid movement and repair choices to the site. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
The service conversation should move quickly from label to task. With design and engineering, that means naming the asset, the failure point, the supply need, or the site condition early. Around Edmonton, AB, that keeps the request grounded in the place where the job will actually happen.
The value is not just in naming design. It is in showing how the scope connects to an asset, location, or schedule. Engineering gives the customer another route when the first need changes. That makes the page more helpful without turning it into a long service series.
Planning stays clearer when design remains close to engineering. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Edmonton, AB sets the local context without turning the description into a street-address block.
The final test is whether the service path feels clear. Design, engineering, lifting and compression should point to a real job discussion, not a category dump. In Edmonton, AB, that means connecting the capability to a branch, shop, field, or project decision the customer can act on. The detail should also help a customer decide what to do next. A person can check whether design belongs in the first call. They can also see when engineering should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when design remains close to engineering. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Edmonton, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use design as the anchor, then bring in engineering where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether design belongs in the first call. They can also see when engineering should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use design as the anchor, then bring in engineering where it helps clarify the next step. That keeps the path helpful without adding a loose series.
KD Rogers Well Drilling, operating as K & D Drilling, has been a trusted name in water well drilling from Fulda, Saskatchewan since 1989. They provide water well drilling, pump installation, and well service for agricultural and oilfield water supply needs across the prairies.
Industrial, marine, and offshore sites need life safety systems and measurement instruments that can be planned, installed, and serviced by one technical group. K & D Pratt works from Atlantic Canada with life safety, instrumentation, technical services, offshore, coatings, and sanitation divisions.
Our instrumentation team works across flow, level, pressure, analytics, temperature, recording, and digital communications. These systems help industrial processes measure conditions and keep control decisions tied to real field data.
Life safety is a separate core service for high-risk environments. We handle tools, clothing, escape devices, fire suppression, alarm systems, and evacuation systems for industrial, marine, and offshore settings.
We have served Canadian clients for more than 100 years, with roots in fire safety and service dating to 1922. Our Dartmouth location connects with technical contacts across life safety, instrumentation, technical services, sanitation, and industrial solutions.
K & D Pratt plans supply, installation, and service around site risk, operating environment, and the technical system involved, from offshore safety equipment to plant instrumentation.
Some welding jobs cannot come to a shop, so the welder has to come to them. Kahuna Portable Welding is based near Grande Prairie, and we bring mobile welding straight to the wellsite, yard or facility where the steel needs joining.
Portable welding is what we do. Loading the gear and driving to a remote lease or a busy plant lets us make repairs and fit-ups in place, which saves the time and cost of hauling heavy machinery back to town. We work across the oilfield and industrial jobs that come up around the Grande Prairie area, and we are set up to handle the everyday welding that keeps operations running.
We keep a straightforward schedule and answer the phone when a job comes in. If something on your site has cracked, broken loose or needs a new piece welded on, give us a call and we will come out to take a look and get it sorted.
Oilfield drilling and service work depends on pressure, weight, torque, and depth readings that can be read in real time. Kane Instrumentation Ltd works from Edmonton with instrumentation for mud pressure, weight indicator, torque measurement, chart recorder, and depth measurement applications.
We supply oilfield instrumentation tied to rigs, wireline work, pressure testing, and control-air equipment. The product scope includes gauges, meters, valves, pumps, air compressors, and hose test pressure panels where measurement and control have to line up with the job.
Safety-related tools are part of the same field package when the application calls for them. Self-retracting lifelines and shear cable cutters sit beside pressure and measurement products because oilfield work often needs instrumentation and site safety equipment planned together.
Kane Instrumentation has operated from Edmonton since 2002, with stated oil patch instrumentation knowledge across the team. Our focus stays on the instrument, the pressure range, and the field application it has to serve.
Treaters & Separators at Fre-Flo Oil. Estevan, SK You are using an outdated browser. Please upgrade your browser to improve your experience. – 1” thickness SHEAR Mechanical Shear 96” wide material 18ga.
Alternator Starter Karam Auto Ltd Alternators and Starters Karam AL Alternators and Starters 1-888-515-2726 / 826 45 St E, Saskatoon, SK S7K 0W5 Your partner for Alternators, Starters and Electric motors Welcome to Karam A.L. We are a full service provider of new and remanufactured alternators, starters, DC electric motors, generators and associated parts. Since 1985, our alternators and starters have powered buses, cars, combines, emergency vehicles, forklifts, mining & oilfield equipment, trucks, tractors, swathers, ATVs, RVs, and boats.
With 15 years of experience delivering quality service in machining, welding, mechanical & design - Kaymor is your one-stop-shop near Grande Prairie. Based in Clairmont, AB.
Kema Enterprizes has repaired and serviced pumps, compressors, hydraulics, and natural gas engines for the oil and gas industry from Redwater, Alberta since 1990. ISNetworld and ComplyWorks member.
Keyera is a leading Canadian midstream operator providing natural gas gathering and processing, NGL fractionation, storage, transportation, and marketing services across Western Canada. Upstream producers, gas plant operators, and petrochemical manufacturers rely on Keyera's integrated midstream platform and strategic infrastructure network to move, process, and market their natural gas liquids and iso-octane with maximum value realization and operational flexibility.
A drifting control valve or missing meter can slow a fluid-processing facility. Keysource works from Red Deer, supplying new and aftermarket process control equipment for refining and fluid-processing systems.
Our inventory covers control valves, chart recorders, flow computers, precision turbines, instruments, and meters. Those parts fit plants, shops, and field facilities that need replacements matched to an existing control setup.
With more than 25 years in instrumentation, we also handle asset recovery and hard-to-source parts. Our Red Deer team keeps process control sourcing tied to the same job scope.
Welcome to Scott Safety, a leading safety company dedicated to providing high-quality safety solutions to our clients. Our mission is to ensure the safety and well-being of our customers through our innovative products and services, which are designed to protect people, property, and the environment. At Scott Safety, we believe that safety is not just a job, but a responsibility. We are committed to delivering exceptional safety services and products that meet or exceed our customers’ expectations.
We specialize in residential, commercial, and industrial projects, delivering safe, high-quality work tailored to each client. Safety First: We follow strict safety standards to protect your property and loved ones. Your safety is always our top priority. Reliable Service: We’re punctual, efficient, and stick to agreed timelines and budgets, ensuring no unnecessary delays.
Flow control problems can show up as a leaking valve, a bad reading, or a pressure device that cannot wait for the next turnaround. King's Energy Services Ltd works from Red Deer County with valve repair, instrumentation, controls, and manufacturing for oil and gas, midstream, petrochemical, and turnaround jobs.
Our valve path starts with repair and pressure-relief work. Mobile valve technicians and control-valve capability support operating sites where pressure protection has to stay planned around active assets. Tank vents, hatch repairs, and wellhead maintenance fit the same field-control problem.
Electrical, instrumentation, and controls connect measurement and actuation to the same issue. King's also handles calibration, flow computers, gauges, orifice fittings, meter runs, regulators, and electric actuators when the system needs better data or response.
Manufacturing adds the shop side. Machining and fabrication handle the build path. Inspections, recertification, pressure testing, and load testing help prove the package before it returns to the facility. Chemical injection pumps, flare gas meters, and catalytic heaters round out facility needs that go beyond a single replacement part.
Founded in 1977, King's Energy has built its Red Deer County operation around products and field execution for oil and gas facilities. For planning, the key variables are valve type, pressure duty, measurement point, field access, shop scope, and turnaround timing.
For over 50 years Kingsway Instruments has been Canada's most trusted instrumentation provider with the lowest prices and fastest turnarounds - bar none. Shop online for Sales, Service, Rentals and Calibration of Electrical, Dimensional, Humidity, Pressure, Temperature, and Torque products by Fluke, Additel, and more.
We are a small hard working company that takes tremendous pride in the work we do and the care we give to our equipment. We hold this level of work ethic to the standards of which this oil patch was built on and this value is what separates us from other companies along with the flexibility and adaptation that comes with the ever evolving oil patch. It our belief here at Lesak that the mentality of our employees is essential to the success of our company. Our employees are programmed in the principals of hard work, honesty, and initiative.
A service rig build has to match the well program, transport plan, and repair path after years in the field. KSM Rig & Equipment works from the Camrose area on service rigs, workover rigs, pump units, and rig packages with manufacturing history dating back to 1995.
Our rig line covers service rigs, freestanding rigs, trailer-mounted rigs, and SAGD-equipped rigs. Pump units can be planned as truck-mounted, trailer, skidded, or self-propelled packages depending on field requirements.
The surrounding rig package can include mud pumps and drawworks. Accumulators, hydraulic outriggers, utility skids, doghouses, gear boxes, and multi-terrain moving systems round out the build. When assets need a second life, repairs, retrofits, and spare parts keep planning tied to the actual KSM or Kremco model.
Kost Fire Safety provides safety product sales and technical service offsite and onsite for oilfield, industrial and agricultural clients. We have an extensive client base from British Columbia to Saskatchewan.
Connelly Insulation is a mechanical insulation contractor servicing the Oil & Gas Industries, Process Industries, and the Commercial Construction sector.
Do you need assistance, do you have a question, or are you looking for your personal KSB contact. Then you’re in the right place. Also, don't miss our FAQ section at the bottom of this page to find fast answers to frequently asked questions. Tel: 905-568-9200 Pumps and General Inquiries : [email protected] Spare Parts : [email protected] Service : [email protected] We’re here to support you Location Finder Are you already using the benefits of MyKSB Business.
KSB Industrial Services Inc provides Automation Control Systems, Instrumentation, Electrical Contractors services to oil and gas operators in Drayton Valley, AB and across Western Canada.
Established in 1985, Petroservice evolved from rebuilding gas pumps to being one of the fastest growing Petroleum Service providers servicing clients from Alberta to Newfoundland. Whether petroleum, car wash, or EV, our service model ensures customers’ needs and expectations are met. The desire to be the best is what drives us each day.
Water supply problems can stop a rural site, industrial yard, or recreational facility from working the way it should. L & B Water Services Ltd handles water well drilling, water well testing, pump work, cistern systems, and water treatment from Stony Plain for Edmonton and central Alberta.
We design and install cistern tank systems when a site needs stored water with dependable delivery. Pumps, pressure tanks, and variable speed drives are matched to the water demand so the system can move water where it is needed.
Water testing and treatment help identify quality issues before a system is sized or changed. Filtration and treatment work is planned around the water source, the building demand, and the operating setting.
Since 1988, our team has worked across community, business, industrial, and recreational water systems in Alberta. Our Stony Plain water service team can plan drilling, pump testing, treatment, and cistern work around the site water need.
LGL Story Creating Lasting Impact Through Independent Science and Integrity Established in 1971 by visionary partners Aird Lewis, William (Bill) Gunn, and John Livingston, LGL is one of Canada’s largest employee-owned environmental research and consulting firms. From the beginning, LGL was founded on a clear purpose: to provide unbiased, evidence-based science that serves both people and the planet. True to our founding philosophy, we are more than just a consultancy—we are a community of scientists pursuing their passions to make a meaningful impact. For more than 50 years, we’ve been collaborating with agencies, industries, and communities to identify environmental challenges and determine the most effective solutions.
In 2021, we acquired Exile Automation as a dominant division of CDN and to grow our core services in automation , fabrication , and telecommunications. We are your full-service provider; it’s all part of the CDN Advantage. BOLDLY GROW: THE CDN STORY MAR 2011 CDN Controls Ltd. is founded by current CEO, Dean Fraser, and COO, Nick Stewart, in Grande Prairie, Alberta, with a vision to define relationship-built, full-scope services.
Lac La Biche Equipment Rentals provides a wide range of equipment for rent in the Lac La Biche area of northeastern Alberta, serving oil and gas operators with heaters, pumps, lighting, and general construction equipment for lease sites and remote operations.
We are continuously striving to improve, embracing change and evolving a culture that is service focused and quality driven. We elevate, innovate and provide solutions for even the most complex of requirements. In choosing to do business with Comet Welding, we are commited to keeping your project and your business running smoothly. Our team The right team can make all the difference.
Process plants need controls that stay stable when production, maintenance, and safety demands meet. From our Mississauga head office, Lakeside Process Controls works on control & control systems, instrumentation, valves, and meters for oil and gas, power generation, mining, and other process industries.
A valve, actuator, regulator, or measurement loop can become a production issue when it drifts or fails under load. We connect product selection with service support so facilities can plan around reliability, maintenance, and process control needs instead of treating each device as a one-off purchase.
Our Ontario footprint includes Mississauga, Sarnia, Sudbury, Thunder Bay, Port Elgin, Hamilton, and a Sarnia mechanical services location. That network supports plant work where field response, shop repair, and lifecycle service all affect uptime.
Lakeside has operated since 1952. Our team brings automation, construction, field service, and mechanical capability into the same project path when an industrial site needs control system work tied to real plant conditions.
A pressure truck or Flushby unit that misses the job spec can slow production before the unit ever leaves the yard. Lash Enterprises in Lloydminster manufactures Flushby units, rod rigs, and pressure trucks for oilfield service work.
More than 100 Flushby and rod rig units have come out of our shop, along with hundreds of pressure trucks. We have also built hot oilers, TMX units, and steam trailers when standard builds were not enough.
Fabrication and machining stay in-house. Mechanical and hydraulic divisions do too. That setup lets us handle new builds, hydraulic repair, and upgrades without sending the job across separate shops.
Our Lloydminster team keeps Flushby units, pressure trucks, and related oilfield equipment moving back toward field use.
Remote oil and gas sites often need chemical injection or process instrumentation without adding fuel-driven emissions at the equipment package. LCO Technologies works from Calgary with Pumps-Chemical, valves, and instrumentation for industrial process use.
Our solar powered equipment includes chemical pumps, air compressors, and vapor recovery units. These systems are built around zero-emission operation at the equipment level.
We are a North American distributor for PANAM instrumentation. The product scope includes valves, tubing, and manifolds used in oil and gas and power generation.
CROSSFIRE valve products add gauge root, ball, check, and double block and bleed isolation options. Custom solutions are available when a standard instrumentation assembly does not match the site design.
Instrumentation parts are sold and delivered worldwide, while our Calgary base remains the point for local service conversations and product planning.
