Service rigs, including single, double, and specialty units, handle the workovers, pump changes, plug-and-abandonment, and mechanical interventions required across producing assets. Operators bring CAODC-certified crews, ancillary equipment for slickline and power-swivel work, and the regulatory tickets for provincial and state compliance. Find service rig operators with the right fleet for your program.
From Sedgewick, we keep wellsite intervention moving across Alberta, Saskatchewan, Manitoba, and North Dakota. Amped Energy Services brings specialized rigs to oilfield jobs that need the right unit on location without a long move.
Our fleet includes custom-built service rigs, flushbys, rod rigs, hot oilers, and grippers. We match those units to the well condition, access, and timing instead of pushing a one-size package onto the site.
We also support production testing and portable tandem flare stack pressure vessel work. With 24/7 dispatch and operating bases across the Prairies and North Dakota, we stay close to the next call.
Heavy lifts, uneven loads, and tight access can stop a move before the rig is set. Ardy Rigging Ltd works from Valleyview on rig leveling, rig jacking, and specialized lifting for drilling rigs and service rigs.
We also handle bridges, tanks, and plant equipment when the move has to stay controlled from start to finish. Jack and slide, horizontal rigging, and alignment are part of the same approach.
Bridge jacking comes in when a structure needs to be shifted or raised with care. Our rigging has been used on drilling and service rigs, compressors, and 100,000 bbl tanks.
It also reaches 1,000-ton vessels and bridge structures. Ferries and plant or mill equipment get the same careful handling when the load has to be managed without guesswork.
Rentals and consulting round out the job when a project needs equipment or lift planning before mobilization. Our Valleyview team plans each move around the asset, the load path, and the access limits.
Portable heat on oilfield and construction sites has to be safe around gas plants, wellheads, pipelines, and tank farms. ASL Industrial No-Flame Heaters supplies self-contained, contamination-free portable heat for industrial and field applications.
We support no-flame heaters, portable heaters, gas plant site heating, compressor site heating, wellhead heat, pipeline heat, tank farm heating, construction heat, coating-job heat, and service-rig support. A toll-free line and direct Barrhead contact make the profile practical for urgent heat needs.
For winter oilfield work, facility maintenance, and coating or construction projects, ASL is valuable when open flame is the wrong answer and clean portable heat is required.
We handle pipeline construction and facility construction for oil and gas, civil, and environmental projects.
Our team also takes on road construction, utility installation, and environmental reclamation. We support oilfield maintenance when a site needs steady field coverage.
When a field site loses electrical reliability, downtime can spread into controls and production. Bi-Systems Electric & Controls Ltd runs 24-hour electrical and instrumentation service from Lloydminster, with on-site repair for oil field construction projects and facility electrical systems.
Our instrumentation work includes PLC programming and meter proving, so control and measurement issues stay in the same job. We also handle electrical systems that keep facilities and construction sites running when the schedule cannot wait for a normal shift.
Founded in 1988, we are Canadian-owned and locally operated. Our Lloydminster base keeps response close for electrical and instrumentation work across central Alberta field sites.
We make downhole drilling tools in Nisku.
Our line includes motors and bypass subs.
It also includes jars and non-magnetic collars.
We also make power sections and hole-opening equipment.
Since 1990, our shop has focused on custom assemblies for horizontal drilling and related downhole jobs.
We choose each assembly around the application and keep the process straightforward.
Bouchard Well Service Ltd is a Brooks, AB-based company that supplies well servicing and service rigs for oil and gas, energy, and industrial customers. The strongest source signals are field logistics and equipment movement and field safety and compliance needs, so the listing is most useful for buyers comparing capability, location, and field readiness.
Service-rig readiness affects completions, workovers, and abandonments before a wellsite job begins. Bullitt Well Servicing Ltd runs service rigs and rod rigs from Slave Lake for oil and gas well servicing across Alberta.
We are a privately owned Canadian company with our head office in Slave Lake. That base keeps us close to regional oilfield activity and the timing of northern field schedules.
Our fleet is rebuilt, refurbished, painted, and certified before it heads out. We keep the focus on service-rig readiness for completions, workovers, and abandonments.
We pride ourselves on being a reliable industry partner focused on delivering high-performance, high-value solutions to meet our customer’s needs. Many years of combined oilfield expertise, both domestic and abroad, are brought to our customers by our team of disciplined professionals. From start to finish, we aspire to provide our clients with excellence. If you have a well servicing problem, we’ll find a solution.
We handle shallow well oil and gas well servicing with a field crew set up for coiled tubing, cementing, and logging.
Camaro Coil Tubing was established in 2002 in Provost, Alberta. Our yard keeps service rigs, tanks and tools ready when a well needs quick turnaround.
We handle oil and gas well servicing at active wellsites.
Our service rigs and pumps keep field response moving.
Light towers and mobile catwalks round out the setup.
Hot shot equipment stays ready for fast turnaround.
We keep HSE front and center on every job.
CAOEC - Canadian Association of Energy Contractors Home About About CAOEC is the trade association for the Canadian energy services industry operating close to the wellhead from coast to coast to coast. Our members provide contract drilling and well servicing for explorers and producers on land and offshore. CAOEC was founded in 1949 and is the oldest oil and gas trade association in Canada. Based in Calgary, Calgary, AB.
From Drayton Valley, we run well servicing with free standing mobile single rigs and an anchored medium double rig.
Our fleet also includes free standing rod rigs for oil and gas wellsite work.
Since January 2012, we have served oil and gas wellsites and stayed active with CAODC membership.
Miller Well Servicing runs service rigs from Weyburn for completions and workovers across Southeast Saskatchewan. We keep the focus on well intervention where the rig and the schedule have to line up.
Abandonments and well maintenance call for a different pace. High-pressure work and critical sour wells demand tighter planning at the wellsite. We also handle re-entry preparation when a well is moving back into the program.
Experienced field and supervisory personnel run well-maintained equipment on every job. That keeps the service-rig side of the job centered on safe, efficient field execution from Weyburn.
Chad Equipment Ltd is a Western Canadian business actively dealing in used oilfield rigs, triplex pumps and industrial equipment. Since 2002 we have been buying and selling used equipment from our home base in the small town of Neilburg, Saskatchewan. Located in the middle of the western Canadian prairies, a vast agriculture land with rolling hills and boreal forests, beautiful lakes and winding streams, herds of cattle and crops of canola, we are surrounded by ample natural resources. The local economies of many of the towns that dot the landscape have benefitted from the production of oil and gas for many years. Within a few hours’ drive from our location we can access many of the oilfields of Saskatchewan and Alberta. Extending a little further afield we include within our radius southern Manitoba and northern British Columbia. This is where we live and breathe. This is where we work and play. This is our home.
We’ve grown to be one of the world’s largest and technologically advanced oilfield service providers. We are defined by our inspired thinking and our culture of achievement, delivering a superior customer experience and trusted, reliable performance. Our premium services include contract drilling, directional drilling, underbalanced and managed pressure drilling, rental equipment, well servicing and production services. Established in 1987, our operations now extend from Canada and the United States to Latin America, the Middle East and Australia.
We’ve grown to be one of the world’s largest and technologically advanced oilfield service providers. We are defined by our inspired thinking and our culture of achievement, delivering a superior customer experience and trusted, reliable performance. Our premium services include contract drilling, directional drilling, underbalanced and managed pressure drilling, rental equipment, well servicing and production services. Established in 1987, our operations now extend from Canada and the United States to Latin America, the Middle East and Australia.
Onshore Drilling Company | About Precision Drilling Innovating for a Brighter Future High Performance Meets High Value Precision delivers safe and sustainable services and technology to the oil and gas industry. We’ve helped countless customers reduce risks and costs at wellsites across the globe thanks to our Target Zero commitment, industry-leading drilling technology, and a demand for High Performance, High Value in every facet of our work. Our Services Precision creates value for our custome. Based in Edmonton, AB.
Dale's Welding 2008 Ltd starts the job conversation with repair planning around Lloydminster, AB. The nearby scope includes parts supply, machining and waterjet cutting. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our repair planning scope starts with the condition of the asset. It can find the fault and choose a repair path. The parts supply side helps customers reduce downtime by finding replacement items quickly. For customers in Lloydminster, AB, that means fewer vague calls and a better start for quoting or planning.
With machining, the important details are fit, access, timing, and handoff. It can bring worn parts back to usable dimensions. The waterjet cutting side helps customers cut material without forcing the job into a narrow machining path. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Welding works best when it is tied to the way the job will be installed or repaired. It can repair or modify metal when fit and access are tight. The fabrication side helps customers turn measurements and wear points into buildable parts. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
Repair planning is easier to judge when the market context is clear. The source material points to agricultural, oil and gas, custom work and repair. That gives the capability a real operating frame instead of a generic industrial label.
The service conversation should move quickly from label to task. With repair planning and parts supply, that means naming the asset, the failure point, the supply need, or the site condition early. Around Lloydminster, AB, that keeps the request grounded in the place where the job will actually happen. This kind of detail also reduces handoff risk. If the first call is about repair planning, the customer can still see when parts supply belongs in the same discussion. Lloydminster, AB adds the local planning layer, especially when timing, access, or branch response affects the job. That keeps the request from bouncing between unrelated categories.
A good close should leave the customer with a practical next conversation. That starts with repair planning and may extend into parts supply, machining and waterjet cutting. This scope connects to agricultural, oil and gas, custom work and repair. Lloydminster, AB gives the location context without copying a full address. The next move should be clear: ask about the service, the asset, the timing, or the quote path. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in parts supply where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether repair planning belongs in the first call. They can also see when parts supply should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when repair planning remains close to parts supply. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Lloydminster, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in parts supply where it helps clarify the next step. That keeps the path helpful without adding a loose series.
Pressure-vessel work, B-pressure installation, and oilfield fabrication all sit close together at DaPaJo’s Brooks shop. That matters on facility and modification projects where a tank, fitting, rig change, or field install has to move through proper fabrication controls before it reaches site.
We support southern Alberta oil and gas work with registered fittings, TC-44 tanks, boiler and vessel repair, welding, pipe rolling, plasma cutting, drilling-rig modifications, tapping, and installation. ABSA quality-program capability and ASME repair standards give tank, vessel, and facility projects the documentation discipline they need.
For energy producers and facility teams, the value is having fabrication and installation experience connected. DaPaJo can support regulated shop work and oilfield site modifications without treating them like separate problems.
A wellsite shifts from completion to abandonment in stages, and the rig has to keep up. Diamond Energy Services runs service rigs from Swift Current for that kind of field work across Saskatchewan and Alberta.
Our large welding, fabrication, and mechanical shop supports repairs when a unit needs new steel, a rebuild, or a fix before it goes back to the lease. We keep the shop tied to the rig schedule so the field job stays moving.
We have been based in Swift Current since 1996, with our shop and field teams tied to oil and natural gas assets that need steady well support.
A wellsite can lose a day when the rig, pumps, and site gear are not lined up before the move. DHC Well Servicing in Sherwood Park runs oil and gas well servicing across Western Canada.
Our fleet includes single and double steamers and pumps. Light towers, mobile catwalks, and hot shot equipment round out the field support package.
We keep HSE front and center while the job is planned and carried out.
That approach fits wellsites that need the right rig and support gear ready for the conditions on location.
Heavy oilfield moves need the right truck, lift plan, and local road knowledge. DTD Oilfield Services handles oilfield transportation from Swift Current for Southwest Saskatchewan and Alberta, including service rig and drilling site moves.
Our picker services cover lease clean-up, completion deliveries, assembly work, and certified man basket work. We also set tanks up to 1500 BBL where the job needs lifting capacity and field coordination on location.
Tank moves and heavy hauling are part of the same oilfield transportation need. We move casing, tubing, and rods to drilling and service rigs, with planning shaped by route, load size, and site access.
We have worked in this region for more than 25 years as a family owned operation. DTD Oilfield Services is based in Swift Current and built around field transport for oilfield sites in Southwest Saskatchewan and Alberta.
Power tongs on drilling rigs depend on controlled torque and clean threads. Dutch Casing Services keeps tubular handling moving from Fort St. John across northeastern British Columbia.
We run power tongs on drilling and workover rigs, with 24-hour dispatch tied to rig-floor timing. Casing jobs stay close to schedule when the tong package, crew, and thread condition are planned together.
Since 1999, our Fort St. John team has stayed close to oil and gas activity that needs rig-side response and trained casing hands.
Service rig work in southeast Saskatchewan depends on safe moves, steady supervision, and a crew that knows the wellsite. Eagle Sky Ventures Ltd. runs service rigs from Carnduff, SK for wells across Saskatchewan.
We keep the job organized around rig supervision and field hands working as one team. That is the right setup when timing, communication, and site control shape the pace of the job.
Our Carnduff base keeps us close to Saskatchewan oilfield activity. It also keeps planning tied to the local pace of rig moves and wellsite execution.
Senior management backs a safety-first culture, and that standard carries into the field on each job.
Eagle Well Servicing - Western Energy Services Corp. From these operation bases, the reach of our rigs expands into all key Western Canadian Sedimentary Basin Oil and Gas plays. Our goal is to provide the best in the industry by deploying one of the newest lines of equipment in Western Canada. All of our rigs have been built new since 2004 which mean industry leading innovations to meet the changing demands of our customers, and more efficient and safe operations to save time and money.
Frozen culverts, dirty tanks, and oilfield gear can stop a site from moving. Janco Steaming runs mobile steam cleaning, vac, and hydrovac service from Edson for industrial cleaning needs across west-central Alberta.
Our steam cleaning is built around heat, pressure, and mobile access. Production equipment and service rigs can be cleaned at the jobsite. Tanks and culverts can be handled when residue, ice, or debris is blocking the next step.
Vac capability gives Janco another path for wet material and cleanup around industrial sites, logging areas, and remote access points near Yellowhead County. We publish 24/7 availability for scheduled cleaning and urgent field needs.
is proudly, a Canadian-owned staffing agency based in Alberta, specializing in supplying high-performing labour to the oil and gas industry. We provide reliable, safety-driven field personnel for short-term, seasonal, shutdown, construction, and long-term operations throughout Alberta and British Columbia. Founded by industry veterans Nick McDonald, Kurt Hivon, and Shawn Dunbar, Empire was built by people who know the field—because they’ve worked in it. What began as a service provider in facility maintenance and completions support has evolved into a leading oilfield staffing partner trusted by operators across Western Canada.
We’ve grown to be one of the world’s largest and technologically advanced oilfield service providers. We are defined by our inspired thinking and our culture of achievement, delivering a superior customer experience and trusted, reliable performance. Our premium services include contract drilling, directional drilling, underbalanced and managed pressure drilling, rental equipment, well servicing and production services. Established in 1987, our operations now extend from Canada and the United States to Latin America, the Middle East and Australia.
Ensign Drilling Denver office serving Rocky Mountain and DJ Basin drilling operations with contract drilling and well servicing across Colorado and Wyoming.
Ensign Drilling - Lloydminster serves heavy-oil and conventional well programs near the Alberta-Saskatchewan border. We keep the branch description centered on contract drilling, rig availability, and the field timing that shapes Lloydminster-area wells.
The Ensign platform includes directional drilling, managed pressure drilling, underbalanced drilling, well servicing, rental gear, and production services. Those lines fit programs that need more than a rig slot, but contract drilling remains the center for this branch.
Ensign began in 1987 with four drilling rigs and two well service rigs in Alberta. That background gives the Lloydminster office a practical context for rig capability, pressure control, and moves between wells.
Midland drilling programs often need purpose-built rigs, pressure control planning, and field support close to the Permian Basin. Ensign Drilling - Midland handles contract drilling from Midland, Texas, with directional drilling, horizontal drilling, and managed pressure drilling capability for oil and gas wells.
Our drilling fleet is built for wells where the path, pressure window, and site conditions drive the plan. We pair rig selection with drilling products and services so the field plan matches the well design before equipment moves.
Ensign began in 1987 with drilling rigs and well service rigs in Alberta. Today we apply that drilling and well servicing base to U.S. oilfield programs that need rig capacity, rental equipment, and production services tied to the same operating plan.
From Midland, we can align contract drilling scope, directional drilling needs, and rental equipment around the next well schedule.
A well program near Adelaide needs drilling control, service rig planning, and field equipment that can move with the job. Ensign Energy Services - Adelaide handles Drilling Products & Services for oil and gas wells across Adelaide, South Australia.
We build the job around contract drilling, directional drilling, and horizontal drilling when the well path calls for more control than a straight hole. Underbalanced and managed pressure drilling help manage pressure while the well is being drilled.
Well servicing and production services keep producing wells on plan after the rig move. Rental equipment supports the same field program when pressure control, site setup, or short-term job needs change.
Our Australian field team works from the Adelaide area with the backing of Ensign's global oilfield service experience. Ensign began in 1987 with drilling rigs and service rigs, and that rig background still shapes how we plan wellsite execution.
In Neuquen, drilling plans often depend on well path control and pressure management before the rig ever moves. Ensign Energy Services - Argentina handles Drilling Products & Services for oilfield wells from our Neuquen service area.
We match contract drilling with directional drilling and horizontal drilling when the well design calls for controlled placement. Underbalanced and managed pressure drilling are used for programs where bottomhole pressure needs close attention during the drilling phase.
After drilling, well servicing and production services help keep the well aligned with field goals. Rental equipment supports short-term oilfield needs when the job calls for added capacity or specialized site support.
Ensign has operated since 1987 and has grown from an early rig base into a global oilfield service group. Our Neuquen team brings that drilling and service rig background to Argentina field programs.
Pressure control and well path accuracy shape every Bahrain drilling program. Ensign Energy Services - Bahrain in Manama provides contract drilling and directional drilling for oil and gas programs.
Horizontal drilling is part of the same drilling path when the wellbore has to hit a target zone. Underbalanced drilling fits wells where pressure behavior needs tighter control.
Rental equipment supports the program between drilling phases. Production services and service-rig work keep the field base active after the well is drilled.
Ensign has operated since 1987, starting with drilling rigs and well service rigs in Alberta before growing into a global oilfield services company. Our Bahrain office carries that history into local drilling schedules and service-rig planning.
Pressure, heat, and tight drilling windows can raise the risk on Middle East well programs. From Dubai, Ensign Energy Services - Dubai connects oil and gas projects with drilling products and services built around contract drilling, directional drilling, horizontal drilling, and managed pressure drilling.
Our published service scope includes underbalanced and managed pressure drilling. Those methods help shape the drilling plan when formation pressure, circulation, or well control needs close attention during the well.
We also work with rental equipment, pressure testing, well servicing, and production services when the project scope requires field follow-through after the drilling phase.
Ensign has operated since 1987 and now works as a global oilfield service group. Our Dubai location gives regional projects a direct path into drilling-contractor planning and well service availability.
