Bits

Calgary, AB, CAN

Advantage Products Inc provides Tools-Downhole, Oilfield Equipment-Manufacturing, Construction, Bits, O-Rings & Seals services to oil and gas operators in Calgary, AB and across Western Canada.

Edmonton, AB, Canada

Construction jobsites need clear safety training before people step into high-risk work. Alberta Construction Safety Association is an Edmonton-based association for Alberta’s construction industry, with education, products, and services built around safer workplace practice. We work with construction employers and workers who need practical safety training for field, shop, and project environments. Our training and resources are tied to the daily goal of helping people return home at the end of each day. Our funding includes WCB levies, and our board includes people from construction, trade associations, and regional representation across Alberta. That structure keeps our education tied to the industry we serve. In-person class information is managed through our training locations, with our Edmonton office at 225 Parsons Road SW. Our team can help match construction safety training and association resources to Alberta jobsite needs.

Ponoka, AB, Canada

All-Quip Rentals connects repair planning to the job problem behind the request around Ponoka, AB. Rental planning is treated as a related part of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on. Our repair planning scope starts with the condition of the asset. It can find the fault and choose a repair path. The rental planning side helps customers cover a short-term job need without buying the asset. For customers in Ponoka, AB, that means the first call can start with the asset, access point, schedule, or part that actually drives the job. Repair planning changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes agricultural, oil and gas and repair. That keeps the page close to the source facts without drifting into broad claims. Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect repair planning with rental planning so the request can move from a rough need into a clearer service discussion around Ponoka, AB. The practical benefit is less confusion at the start of the job. When repair planning is explained through real use cases, the customer can ask a sharper question about the asset, schedule, or site condition. Rental planning gives that request a related path when the first issue turns into a part or repair question. Around Ponoka, AB, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope. Planning stays clearer when repair planning remains close to rental planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Ponoka, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in rental planning where it helps clarify the next step. That adds depth without copying a loose series from the source page. The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with repair planning and then connecting it to rental planning keeps that conversation anchored. This scope connects to agricultural, oil and gas and repair. Listed as established in 1990, the operation also has a continuity signal for repeat local purchasing. Around Ponoka, AB, the scope is tied to what a customer can discuss and the operating setting it fits. If the same job moves toward fabrication or inspection, the customer still has a way to keep the conversation connected. Rental planning and field response can also change the schedule when the source evidence supports those capabilities. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next. If a branch or yard is involved, that context can change the quote path and the schedule. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect repair planning to the equipment, people, and schedule behind the request. Ponoka, AB also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step.

Edmonton, AB, CAN

Applus+ provides solutions for customers in all types of industries to ensure that their assets and product meet quality, health & safety, and environmental standards and regulations. Based in Edmonton, AB.

Sherwood Park, AB, Canada

At Kan Grow, we believe healthy soil is the foundation of a thriving planet. That’s why we’ve developed a soil enhancement solution designed to work with nature- not against it. Our mission is to restore soil vitality, improve crop performance, and support sustainable agriculture from backyard gardens to commercial farms. Why Choose Kan Grow Field trials show measurable improvements - up to 5% in cantaloupe and 3% in corn yields- with no change in fertilizer or irrigation practices.

Calgary, AB, CAN

From Calgary, Baker Hughes supports Western Canadian wells with wellheads, connectors, and intervention work from construction through abandonment. We bring the right equipment for jobs where access, connection, and repair have to stay controlled. Pipeline management and gas processing/LNG cover the path from well to plant and terminal. Downstream chemical work supports treatment, while terminal, blending, and transportation services keep product moving through the next handoff. Cordant digital solutions and iCenter maintenance services connect condition data with planning. Distributed vibration monitoring and machine protection give rotating assets a clearer operating picture. Pressure sensors add another layer of visibility, and our centrifugal pumps are built for harsh-duty service.

Calgary, AB, CAN

We serve oilfield and industrial sites from Calgary with gas processing, LNG, and pipeline management. We also handle subsea systems and well intervention. We keep digital services, maintenance, and centrifugal pumps in place for harsh conditions.

Ponoka, AB, CAN

BBI Banana Bits provides Bits services to oil and gas operators in Ponoka, AB and across Western Canada.

Okotoks, AB, Canada

Our drilling line centers on tricone and PDC bits. We also handle retipping and PDC repair for worn tools. Since 1989, we have backed HDD and workover jobs with rerun milltooth and TCI bits.

St Walburg, SK, CAN

Cutting tools take the wear when underground and surface equipment meets hard ground. Bit Service Company Ltd builds around Bits and Tools for mining and tunneling, with precision-engineered carbide products from St. Walburg. Our product work includes conical bits for trim chains and roadheaders, carbide roof bits for underground drilling, and conical carbide for planers. These tools are made for mechanical cutting where bit life, fit, and wear control affect daily production. In Canadian tunneling, we have a long history with belt conveyor spillage control, mechanical cutting tools, and wear-reduction products. That experience connects the bit to the larger equipment problem, including chains and conveyor cleanup around cutting systems. For underground continuous miners, roadheaders, planers, and roof drilling, our St. Walburg team focuses on carbide tool selection and wear-reduction products that match the machine and ground condition.

Calgary, AB, Canada

Bring your vision to life today. BJ's Exhibit's and Services will build, design and fabricate to make your vision come to life and to help you stand out from the crowd. VIEW OUR PORTFOLIO Explore our wide range of display products & accessories.

Edmonton, AB, CAN

Black Knight Energy Services Ltd provides Bits services to oil and gas operators in Edmonton, AB and across Western Canada.

North Bay, ON, Canada

Boart Longyear supports drill programs that have to do more than reach depth. When the job has to answer geology, water, access, and production at the same time, we build the plan around the formation and the result the project needs. We support mineral exploration drilling, and we also work on water services and production drilling for mining and resource operations worldwide. The point is not simply that we have a broad menu of methods. The point is that we can match the method to the ground, the sample target, and the operational constraints instead of forcing the site to adapt to a fixed setup. For the buyer, that means fewer compromises when the priority is clean data, steady progress, and equipment that can hold up in demanding field conditions. Surface coring is practical when the first read on the formation has to be as clean as possible. Underground coring serves programs that need control and sample recovery below ground, where access and structure can change the plan quickly. Those methods help a team verify layers, compare intervals, and move into the next phase with better evidence instead of guesswork. They also reduce the risk of building later decisions on incomplete ground conditions. In a mining or resource program, that shows up because a poor early read can affect hole placement, sampling confidence, and the timing of later work. Our approach is to keep the drilling method aligned with the information the project is trying to protect. When the hole has to move through difficult ground, the method choice can matter as much as the rig itself. Reverse circulation drilling and rotary drilling serve different formation and production needs, and directional drilling adds control when the path has to stay planned around target zones, access limits, or site layout. We use those options to balance speed, accuracy, and reach against the real conditions in front of us. That can make the difference between a program that stays on line and one that loses time to rework or avoidable deviation. If the project is working through changing rock, constrained access, or a target that cannot tolerate drift, we can choose the method that best fits the hole. Sonic drilling gives us another way to handle mixed ground or constrained sites where a standard approach may not protect the sample or the schedule. It is practical when the job has to adapt to changing overburden and still preserve the project’s sense of direction. Water work sits in the same operating picture. We provide water supply drilling when a site needs a dependable source, dewatering when groundwater has to be controlled, and pump services when flow has to stay stable enough for the next phase of work. Those services help keep field teams moving through wet ground and changing subsurface conditions, and they give a project a more coordinated way to handle the water side of the job instead of splitting that responsibility across multiple vendors. The rig side shows up because a good plan still depends on machines and tooling that can support it. Our drill rigs and performance tooling are built for long life and high performance, and the technology behind them is intended to keep productivity up while supporting the safety features the job demands. We also work with drilling products that help keep productivity promises realistic in the field. That shows up on programs where moving the rig package, keeping the hole productive, and protecting the job site all have to happen at once. A well-matched rig and tooling setup can reduce avoidable downtime, cut handoffs, and keep the crew focused on the next metre instead of the last problem. For a buyer, the practical benefit is clearer control over schedule and a better fit between the drilling package and the geology. We have been doing this since 1890, so our work is shaped by continuity as much as by individual projects. Drill programs change as the formation changes, but the need for dependable equipment, usable data, and steady progress does not. That is why we keep the focus on the relationship between method, tooling, water control, and the result the site needs. If your program needs a mineral exploration drilling contractor, a water-services partner, or production drilling support that can be matched to the ground instead of forced onto it, we can help choose the setup that fits the hole, the timeline, and the result you need.

Fort St John, BC, Canada

Brimel Exploration Services Inc brings instrumentation into focus by tying it to the customer situation around Fort St John, BC. Wireline and bits are treated as related parts of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on. Our instrumentation scope starts with the condition of the asset. It can connect the request to the job condition and next decision. The wireline side helps customers connect the request to the job condition and next decision. For customers in Fort St John, BC, that means the first call can start with the asset, access point, schedule, or part that actually drives the job. With bits, the important details are fit, access, timing, and handoff. That capability helps customers connect the request to the job condition and next decision. The customer can explain what is broken, what has to fit, and what has to move before the request turns into a quote or service plan. Instrumentation can mean different things in a shop, plant, field, or branch setting. Here, the published details connect it to mining and oil and gas. That gives customers a better way to place the service in a real job. A narrow service label is rarely enough on its own. The stronger question is what has to be built, repaired, checked, moved, or kept online. We use instrumentation as the anchor and bring in wireline where it helps define the next step in Fort St John, BC. The value is not just in naming instrumentation. It is in showing how the scope connects to an asset, location, or schedule. Wireline gives the customer another route when the first need changes. The services are expanded into decisions and conditions instead of being left as loose terms. The detail should also help a customer decide what to do next. A person can check whether instrumentation belongs in the first call. They can also see when wireline should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. The final test is whether the path feels clear. Instrumentation, wireline and bits should point to a real job discussion, not a loose category block. This scope connects to mining and oil and gas. Listed as established in 2006, the operation also has a continuity signal for repeat local purchasing. In Fort St John, BC, that means connecting the capability to a branch, shop, field, or project decision the customer can act on. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect instrumentation to the equipment, people, and schedule behind the request. Fort St John, BC also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When wireline enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories. A stronger request usually names the asset, the location, the timing, and the condition that created the need. Those details help show whether the need is a quick supply question or a deeper repair discussion. If the same job moves toward fabrication or inspection, the customer still has a way to keep the conversation connected. Rental planning and field response can also change the schedule when the source evidence supports those capabilities. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next. If a branch or yard is involved, that context can change the quote path and the schedule. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request.

Brooks, AB, Canada

Brooks oilfield and pipeline jobs often need a rental counter that can react faster than a distant yard. At BRK Equipment Rentals Ltd, we rent compact jobsite machines and light tools from our Brooks location. Pumps and lifts are part of the same rental counter when a pipeline or gas job needs temporary gear instead of a purchase. Our small-engine shop helps keep returned tools ready for the next field day. The Brooks location lists 24-hour on-call availability for urgent jobs, giving nearby field teams a local path when timing changes.

Edmonton, AB, Canada

A service truck, shop wall, temporary event area, or yard entrance needs clear identification before people can act on it. Brushworks Advertising makes signs, decals, banners, and vehicle graphics in Edmonton for businesses that need durable visual communication on vehicles, plywood, metal, plastic, windows, and other sign surfaces. We build one-colour decals, full-colour digital banners, A-frame signs, magnetic signs, labels, window lettering, and vehicle graphics for cars and trucks. That range gives our Edmonton sign shop practical options for fleet branding, temporary site messages, tradeshow displays, golf tournament signs, and permanent business signage. Our sign-making history goes back to 1983. The tools have changed from brushes and squeegees to modern sign production equipment, but the job is still the same: choose the right material, make the message readable, and match the finished sign to the place it will be used. For a new sign, decal, banner, or vehicle graphic, our Edmonton team can plan the medium, size, material, and finish around the message and the surface it needs to live on.

Clairmont, AB, CAN

We are glad you have found our website. We are a young, relational church who values Christ-centered worship, Spirit-filled Biblical Preaching and authentic relationships. We also have a love for the lost and consider every believer a minister in God's Kingdom. We are affliated with the Evangelical Free Church of Canada , a movement of about 150 churches in Canada.

Edmonton, AB, Canada

Concrete repair failures often start with the wrong material for the surface, load, or exposure. Con-Spec Industries Ltd supplies grout-epoxy products and specialty construction materials from Edmonton for industrial, commercial, and construction projects across Western Canada. We focus on concrete repair, maintenance products, and restoration materials for new construction and damaged structures. That includes repair situations where the job needs the right bonding, patching, or protective product before the site moves forward. Our Edmonton team sources products from quality manufacturers and matches them to structural and aesthetic restoration needs. We also manufacture and supply selected specialty products when a project calls for a more specific product answer. For industrial floors, facility repairs, and concrete restoration work, our role is to help select practical materials that fit the repair method and site conditions.

Calgary, AB, Canada

Open-cut access can create the wrong kind of problem when a utility route has to cross pavement, landscaping, or an active site. Crossroads Coring Ltd handles horizontal directional drilling from Calgary for Southern Alberta projects that need the installation path planned below the surface. We have specialized in HDD since 1989. Bore planning depends on ground conditions, entry and exit points, depth, route length, and what has to stay undisturbed above the crossing. Commercial sites, residential developments, and deep utility projects each bring different access limits. Directional drilling gives the installation a way through when trenching would add restoration work, traffic disruption, or surface conflict. For Calgary and Southern Alberta HDD work, the practical discussion starts with the crossing, route, access, utility size, and site constraints. That is where the drill plan becomes a field-ready installation path.

Edmonton, AB, CAN

PEI's trusted business provider. Custom visual communication, printing, signs, & promotional products. Serving Atlantic Canada for 30+ years. Based in Edmonton, AB.

Calgary, AB, CAN

Ensure workplace safety and compliance with Danatec's expert-designed training. Providing Safety training for over 40 years. Based in Edmonton, Calgary, AB.

Crossfield, AB, CAN

Production testing loses value when heat, water, flowback, and data collection are planned too late in the field schedule. Demon Oilfield Services works from Crossfield on production testing and fluid heating for Western Canadian oil and gas sites. We started in 2006 with production testing and later added water management. That path fits jobs where the well test, flowback package, and winter conditions have to line up before the crew is waiting on location. The ROJO Diablo Superheater gives us a field heating option with tri-fuel capability across diesel, propane, or natural gas. Flowback tanks and flare stacks can be planned with boilers or office trailers when the location needs a broader field package. Fin Design adds custom welding and fabrication when standard rental gear does not match the site. For a Demon request, the practical planning points are test objective, heating demand, fluid volume, flare path, fabrication need, and Crossfield dispatch timing.

Acheson, AB, CAN

Diamond Drill Ltd provides Bits services to oil and gas operators in Acheson, AB and across Western Canada.

Sherwood Park, AB, Canada

is a leading turnkey utility construction company headquartered in Sherwood Park, Alberta. Starting with humble beginnings of 2 trucks, 1 trailer, and a piece of equipment, we’ve rapidly expanded to a fleet of over 60 units. Our continuous growth extends across Western Canada as we strategically add new locations to better serve our clientele. These values are deeply ingrained in every aspect of our operations, guiding our decision-making processes, shaping our company culture, and driving our unwavering commitment to excellence.

Edmonton, AB, CAN

A cracked casting can stop a pump, compressor, or downhole tool long before the rest of the asset wears out. Edmonton Cast Iron Repair Co Ltd repairs heavy castings with welding and machining for industrial and oilfield parts. Our welding department handles castings up to 10,000 lb with oxy/acetylene fusion welding or electric arc welding using Ferro Nickel Alloys. Brazing and cold stitching are available when the casting condition calls for a different repair path. Magnetic Particle Inspection and Dye Penetrant inspection check the casting before and after repair. Hydro pressure testing closes the loop before the part goes back into service. We have used this specialized cast iron repair process since 1959. The shop plan stays centered on the part, the defect, and the service pressure.

Grande Prairie, AB, CAN

Expert Mobile Communications Ltd provides Rental Equipment, Communication Equipment & Systems services to oil and gas operators in Grande Prairie, AB and across Western Canada.

Calgary, AB, CAN

Recognized as the top industry supplier and service provider for conventional oil & gas and oilsands related industries and companies across Western Canada. Based in Calgary, AB.

Nisku, AB, CAN

Recognized as the top industry supplier and service provider for conventional oil & gas and oilsands related industries and companies across Western Canada. Based in Nisku, AB.

Calgary, AB, CAN

Reservoir coring gets expensive when recovery targets, tool design, and rig timing are not planned together. Foothills Resource Services Ltd. works from Calgary on coring programs for oil and gas projects that need core recovery and dependable equipment. We began as Foothills Diamond Coring and have provided coring services since 1960. That history connects field coring with the design and manufacture of coring equipment, so the tool plan can match the formation and drilling program. Foothills publishes conventional coring, wireline coring, specialty coring, site services, coring equipment, pre-set drilling, hydrostatic testing, project management, and provision of services. The public site also emphasizes rates of penetration, core recovery, secure retrieval, and quality cores for enhanced analysis. For a Foothills request, the planning details are core objective, formation, barrel and bit selection, wireline need, testing requirement, rig timing, and whether the job needs field execution or equipment support. Pricing, insurance, and emergency availability are not published in the reviewed source text.

Calgary, AB, Canada

Heavy crude loses value when the stream is hard to upgrade. Genoil Inc. develops oil and gas technology in Calgary for heavy-oil upgrading, petroleum engineering, and oily water separation. Our GHU technology history started in 1998 under Canadian Environmental Equipment and Engineering Technologies Inc. That development path sits behind the upgrader and environmental line. Genoil also describes low-cost environmental solutions for diesel shortages and product inventory gaps. From Calgary, we keep the focus on upgrading capacity, separator needs, and making more transportation fuel from existing crude volumes.

Grande Prairie, AB, Canada

We understand and recognize that safety is a company-wide obligation, and is not to be taken lightly. By continuing to focus on frequently updating and improving our safety standards we continue to not only meet, but exceed the ever-changing scope and dynamic of the oil and gas industry. SAFETY STATISTICS Throughout the history of Bexson Transport, we have maintained an exceptional safety rating exemplifying our companies level of professional, efficient, and safely executed operations. Bexson Transport's is a Satisfactory Audited company with a current Risk Factor Score of 0.000.

Calgary, AB, Canada

Guillevin Calgary keeps plant repairs and panel builds moving with electrical equipment-new and related job material. The Blackfoot Trail SE counter and ordering channel let teams search by keyword or product code when a replacement part is already known. We keep automation controls and tools on the shelf for industrial and commercial jobs. Fittings and fasteners cover the small parts that hold a build together. Heaters and pumps round out the product families used on repair and upgrade work. Canadian electrical distribution has been part of our history since 1906, and that long run shows in the product families we keep on hand for maintenance, shutdown, and field install work.

Whitecourt, AB, Canada

Mission We will be the service company of choice for our stakeholders. Connect With us Core Values Safety & Quality Always We provide a safe, progressive and proactive work environment. We work together to ensure that high-quality services and products are delivered to our clients on schedule and budget. We minimize the impact to our planet.

Newtown, NL, Canada

Pipeline and utility crossings depend on steering accuracy before the bore path becomes expensive to fix. Horizontal Technology of Canada Inc works in directional drilling-horizontal crossings with HDD products and field services for pipeline and utility construction. We build and support tools used to open, condition, and steer horizontal bores. Our Winged Warrior field-adjustable fly cutters and barrel reamers are designed for hole expansion in alluvial formations. Mud motor services, steering services, and engineering design support the same HDD job plan. That lets our team connect the tool string, formation, bore diameter, and guidance plan before drilling starts. Founded in 1996, we serve HDD projects from Canadian and U.S. contact points, with source material describing worldwide service from Hockley, Texas. Our role is practical: keep the crossing accurate, protect the pipeline or utility investment, and match the drilling tools to ground conditions.

Sherwood Park, AB, CAN

Inland Industrial Supply Ltd. offers Bits services from Sherwood Park, AB.

Burlington, ON, Canada

Since 1957" Search for: About Us Rustrol 2023-07-07T10:55:03-04:00 About ICCC and Rustrol ® Systems Interprovincial Corrosion Control has been providing corrosion control/cathodic protection materials and professional engineering services to most major end users throughout Canada since 1957. ICCC is recognized by ‘NACE’ with accredited Corrosion Engineering staff, specializing in the protection of buried, immersed or above ground steel structures including: underground storage tanks, pipelines, petroleum refineries, elevated water storage tanks, et al. utilizing the proven technique of “Cathodic Protection”. Quality, Expertise and Knowledge ICCC manufactures a variety of product lines, i.e.

Edson, AB, CAN

JaCat Pressure Truck Services is an energy industry service provider based in Edson, AB. Contact them for reliable oilfield services and solutions.

Maidstone, SK, CAN

Keranda Industrial Supply, Supplies, Parts, Tools, Auto Parts, Ag Parts, Industrial Parts, Tool Shops, Keranda Supply, Maidstone, Saskatchewan, Sask., SK., Lashburn, Lloydminster Based in Maidstone, SK.

Veteran, AB, CAN

Kitter's Bit Supply provides Bits services to oil and gas operators in Veteran, AB and across Western Canada.

Lethbridge, AB, Canada

100% locally owned & operated. We carry top quality professional tools, accessories, fasteners, safety products and more for your needs. Shop online, call, email or visit us in-store!