Browse verified drill pipe contractors and suppliers in the drilling products & services sector, active across upstream, midstream, and downstream energy projects.
One missing specialty item can hold up a field repair or well servicing job. Carreau Oilfield Specialties Ltd serves Alberta and Western Canada from Edmonton as an oilfield supply store for dependable specialty equipment.
We stock equipment tied to well servicing, drilling, flow control, and field maintenance. Blowout preventers and drill pipe serve drilling and well control needs. Tongs, chains, dies, and gauges belong in the tool and handling side of field service.
Flow path parts need the same attention as larger tools. Pumps, fittings, valves, seals, and rubber products help keep pressure and fluid movement under control in demanding field conditions.
Authorized distribution is central to our supply model. We carry oilfield lines from Gearench, Double E, Baird, Oteco, Larkin, Lubrikup, Lewis, Cactus Flow Products, TM Industries, Petol, and other manufacturers.
Since 1975, our Edmonton team has focused on oilfield specialty supply across Western Canada. We help source the right item for the field condition, brand requirement, and service need.
Drilling floors run on controls that have to respond cleanly under load. In Nisku, Control Drilling Service supports Canadian and international oil and gas work with drilling instrumentation and pressure systems.
Our service and sales facility handles drill pipe spinners and Kelly spinners for rigs that need clean handling at the floor. Automatic drilling systems and air controls stay in the same workflow. Pop-off valves, pneumatic tools, and torque wrenches round out the repair and sales side.
Established in 1987, we keep parts inventory and knowledgeable technicians on hand when well servicing equipment needs repair or replacement.
Rig floor gear has to move pipe and hold pressure without slowing the drilling program. Control Drilling Service (1987) Ltd. works from Edmonton with drill pipe spinners, Kelly spinners, and automatic drilling systems for Canadian and international oil and gas jobs.
We service air controls and pop off valves for pressure control on the drill floor. Pneumatic tools and torque wrenches help with setup and repair in the shop.
Automatic pipe wipers, pressure systems, measurement systems, weight indicators, and pressure gauges round out the drilling line. Established in 1987, our Edmonton facility keeps parts available for service calls across Canada and international markets.
The Story of Trail Transport Ltd. Since its founding in 1997, Trail Transport Ltd. has been a trusted name in hot shot and picker truck services across Alberta’s oilfield sector. Established by John Froese, the company originally operated out of Zama City, supporting northern Alberta’s demanding oilfield industry with water trucks, box trucks, ice road building, and lease padding.
Deep Western Canada wells need drilling rigs built for weight, reach, and repeatable moves. Excalibur Drilling Ltd works from Brooks, Alberta with four identical ultra-heavy tele-double rigs for oil and gas drilling programs across the region.
We focus on Drilling-Contractors work where rig performance affects total well cost. Our rigs have 5,000 metre vertical depth capability and 223,400 daN hookload, which suits demanding well plans and heavy string requirements.
More than 4,000 wells have been drilled through our programs over more than 25 years in business. That operating history shapes how we plan rig moves, adapt to changing drilling environments, and keep performance steady from location to location.
Our Brooks office and Calgary contracts office handle drilling discussions for Western Canada programs that need ultra-heavy tele-double rig capacity.
Drill pipe and OCTG inspection work has to catch damage before it reaches the next run. Force South Inspection Services handles pipe inspection, drill pipe services, and mobile field repair from Nisku for oilfield tubular programs.
Our Nisku operation includes in-plant inspection and field service. Evidence from the site names bottom-hole assembly inspection, transverse electromagnetic drill pipe inspection, refacing, and straightening.
We also work in OCTG inspection and repair, threading, manufacturing, and tubing protection. These service families connect shop inspection with the repair steps needed to return tubulars to a usable condition.
Force Inspection Services Inc. was established in 2003 and is headquartered in Nisku, Alberta. Our inspection and threading work is planned around pipe condition, tool string demands, and field schedules for Western Canadian oilfield activity.
When a field project needs oilfield equipment without waiting on all-new supply, reusable inventory can keep the job moving. Gosselin Pipe & Steel buys and sells new and reusable oilfield equipment from Wainwright and Calgary for clients in North America and overseas.
Line pipe, tubing, casing, and drill pipe are core inventory groups for drilling, production, and site buildout needs. We also handle pipe storage and pilings when a job requires material staged for field use.
Production equipment is part of the same buying need. Our inventory focus includes tanks, separators, treaters, pump jacks, compressors, sucker rods, line heaters, and dehydrators.
We specialize in finding equipment that matches the budget and the project requirement. Our Wainwright and Calgary contacts can help with current availability across pipe, tanks, and reusable oilfield production equipment.
Drilling torque, sulfur exposure, and hole conditions shape the pipe program before a rig starts turning. Hilong Petropipe Co Ltd supplies Drill Pipe, Oil Country Tubulars, drill collars, and drilling tools from Nisku for oil and gas drilling applications.
Our product focus is high-quality API and hi-torque drill pipe, including heavy-weight drill pipe. We work with drilling teams that need pipe and tool joints selected for strength, torsional resistance, and service conditions.
Hilong manufacturing facilities produce drill pipes, heavy-weight drill pipes, drill collars, and specialized tool joints. The Shanghai drill pipe facility is tied to Hilong's Three High series, built around high strength, high torsional resistance, and high sulfur resistance.
Accessories and drilling tools are planned around faster drilling, drilling quality, and suitability for special drilling conditions. Our Nisku team can assist with pipe project scope when the application calls for specific drill string performance.
Well intervention and tubular work depend on threads, tools, and pressure-control systems that fit the well plan. Hunting Energy Services Canada connects Calgary oilfield work with Hunting's global manufacturing, connection technology, and intervention product lines.
Our OCTG path covers premium connection technologies and tubular supply for energy and geothermal markets. Advanced manufacturing adds precision tubular components, deep-hole drilling, and complex turned or milled profiles for oil and gas applications.
For producing wells, Hunting publishes well intervention products for logging and other well services. Pressure control, slickline, e-line, control and injection, thru-tubing, and Opti-TEK well test systems sit in that intervention path.
Hunting also manufactures perforating and logging systems, energetics, instrumentation, wireline firing systems, release tools, setting tools, and TCP firing heads. Calgary is the local company record, while the source evidence supports a global energy manufacturing and service network rather than a single-branch inventory promise.
Drill pipe cleaning is specialized work: the inside diameter has to be cleaned thoroughly without treating pipe like ordinary washdown equipment. Hydro-Jet Aqua Pressure Systems provides water-jetting services with a clear specialty in drill pipe ID cleaning.
We support drill pipe cleaning, high-pressure water cleaning, water jetting, on-demand cleaning service, and industrial pressure-washing applications where force and precision matter. The service can also handle other water-jetting tasks when equipment access and pressure capability fit the job.
For drilling contractors, pipe yards, and maintenance teams, Hydro-Jet is most useful when pipe needs internal cleaning before inspection, reuse, transport, or storage.
Pipe running leaves little room for thread damage or missed drift checks. Hydrotestors designs and manufactures oilfield tubing, casing, and drill pipe equipment from Red Deer for OCTG handling and inspection workflows.
Our product line is built around practical pipe tools. API pipe drifts, tubing drifts, casing drifts, and drill pipe equipment help confirm clearance before pipe is run in the hole.
Pressure testing tools are a long-running part of our shop capability. The source evidence states that Hydrotestors has designed and manufactured tubing and casing pressure testing tools for more than 40 years.
Stabbing guides protect pin threads, seal areas, and box-end threads during make-up. Our Red Deer machine shop builds oilfield pipe tools for field use where damaged threads can slow the next connection or create avoidable repair work.
Casing running around Lloydminster needs controlled make-up, clean threads, and equipment that stays in step with the service rig. K & S Power Tongs Ltd runs conventional and integral power tong services for Alberta and Saskatchewan oil and gas work.
We pair the tong fleet with computer torque-turn systems and Volant casing running tools. Power thread washing and thread inspection stay part of the same workflow, so the job moves from make-up to check-out without extra handoffs.
When the spread needs more than tong service, our Lloydminster shop runs handling equipment rentals and light oilfield hauling. The 24-hour dispatch line stays ready for casing programs that run on timing and field access.
Casing jobs need clean threads, controlled torque, and equipment that fits the service-rig plan. K&S Power Tongs runs power tong services from Lloydminster for oil and gas work across the Alberta-Saskatchewan region.
Our field setup includes conventional and integral power tongs, Volant casing running tools, and computer torque-turn systems. Thread washing and inspection help when pipe condition threatens the schedule, while rentals and light hauling cover the logistics around the casing job.
For a tong request, the planning points are casing size, thread condition, torque documentation, rig timing, rental need, and hauling requirement. We keep the power tong path tied to the connection program on the well.
Leross Oilfield Service Ltd gives customers a clearer starting point for manufacturing around Calgary, AB. The nearby scope includes repair planning, parts supply and inspection. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our manufacturing scope starts with the condition of the asset. It can build equipment around the pressure, fit, and operating need. The repair planning side helps customers find the fault and choose a repair path. For customers in Calgary, AB, that means fewer vague calls and a better start for quoting or planning.
With parts supply, the important details are fit, access, timing, and handoff. It can reduce downtime by finding replacement items quickly. The inspection side helps customers check condition before the next stage starts. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Drill pipe works best when it is tied to the way the job will be installed or repaired. That capability helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time.
Manufacturing changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes oil and gas and repair. That keeps the page close to the source facts without drifting into broad claims.
Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect manufacturing with repair planning so the request can move from a rough need into a clearer service discussion around Calgary, AB.
The practical benefit is less confusion at the start of the job. When manufacturing is explained through real use cases, the customer can ask a sharper question and avoid sending the request to the wrong place. Repair planning gives that request a related path when the first issue turns into a part or repair question. Around Calgary, AB, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope.
The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with manufacturing and then connecting it to repair planning, parts supply and inspection keeps that conversation anchored. This scope connects to oil and gas and repair. Listed as established in 2007, the operation also has a continuity signal for repeat local purchasing. Around Calgary, AB, we describe the scope a customer can discuss and the operating setting it fits. Planning stays clearer when manufacturing remains close to repair planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Calgary, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use manufacturing as the anchor, then bring in repair planning where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether manufacturing belongs in the first call. They can also see when repair planning should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when manufacturing remains close to repair planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Calgary, AB sets the local context without turning the description into a street-address block.
Oilfield machine work around Lloydminster often starts with a damaged connection, a worn wellhead component, or a part that has to be repaired before field time is lost. Metaltek Machining Ltd runs a design, engineering, and manufacturing facility on the Alberta-Saskatchewan border for oil and gas, mining, aerospace, and industrial work.
Our oilfield services include wellhead equipment manufacture and repair, rotary connection work, and threading or re-threading for casing, tubing, and line pipe. We also build downhole production and fishing equipment, with customer drill pipe and collars stored through the shop when the job calls for it.
Inside the facility, CNC machines, conventional machines, and advanced CAD/CAM software support both repairs and new manufacturing. Overhead cranes move parts through the shop and yard, so heavier components can stay in one production flow from setup to finished work.
Since 1997, Metaltek has served local and international projects from Lloydminster. Our shop is built for components where geometry, thread condition, repair method, and final field use all have to line up before the cut, weld, or program starts.
R S Machine & Manufacturing Ltd is a Nisku fabrication and machine shop. We build and rebuild oilfield components for drilling work from our Nisku shop.
Our team manufactures RSM brand oilfield products and repairs tongs, elevators, bushings, drill pipe, collar slips, BOP components, and Kelly drives. When a rig part needs machining or custom welding, we rebuild it for return to service.
We have served Alberta's oil and gas, industrial construction, agriculture, and manufacturing industries since 1985.
PDC drill bits and stabilizers need accurate machining, not generic shop work. Samex Canada in Edmonton handles CNC machining, drilling, and grinding for oilfield parts that have to hold shape and thread cleanly.
Our shop manufactures fracking tools and PDC drill bits. We also machine stabilizers and drill pipe accessories. Threading stays in-house for the connection work.
CAM software helps us turn difficult tool geometry into shop-ready steps. From the Edmonton area, we machine oilfield tools with CNC machining, drilling, and grinding before they go back to work.
Drilling rigs need inspection work that catches wear before the next run. Stealth Oilfield Inspections Ltd inspects rigs and downhole tools from Red Deer, and we keep the scope centered on oilfield service.
We stay current with inspection technology so our team can work on drill pipe, drill collars, and bits with the right method for the job. Rental companies also use our Mag Particle Inspection when they need an independent third-party check before tools go back out.
That approach keeps the focus on pipe-related assets and rental equipment, not general shop screening. Stealth has worked in this field since 2001, and our Red Deer team plans around rig activity and rental-tool movement across Alberta, the Midwest, and the Yukon.
a premier cased-hole service company. Our experienced staff will assist your company in risk reduction and increased profit margins. considers safe operations and quality service to be core values. We will conduct business in a manner that protects the people, property and the environment.
Downhole strings fail when pipe design does not match pressure, bending, corrosion, or well path demands. Tenaris Global Services (Canada) Inc supplies coiled tubing manufacturing-sales and service, oil country tubulars, and line pipe from Calgary for oil and gas wells, pipeline projects, and energy infrastructure.
We manufacture steel pipe for the energy industry and related industrial applications. Our coiled tubing is built for well workover, velocity and production strings, logging, drilling, and special downhole applications with factory-installed wireline or capillary tubes.
Offshore and pipeline projects need pipe that can handle deep water, long service life, and tight design controls. We develop custom steel pipes, risers, and related services for deep and ultra-deep water needs, backed by metallurgy experience and R&D facilities.
Low-carbon energy projects use many of the same pressure, transport, and well integrity decisions as oil and gas. We supply products and services for hydrogen storage and transportation, geothermal wells, carbon capture and sequestration, and renewable energy applications where steel pipe performance is central to the project.
Downhole pipe has to match pressure, service life, and the well program. Tenaris Hydril in Nisku connects local energy customers with Tenaris steel pipes and related services for oil and gas, drilling, pipeline, and industrial applications.
We manufacture pipe products for the world energy industry and other industrial uses. Drill pipe and steel tube supply support drilling programs, while related pipe services help keep the product matched to the application.
Coiled tubing is built for well workover, velocity and production strings, logging, drilling, and special downhole applications. Factory-installed wire-line, capillary tubes, and integral tools are available for demanding well environments.
Industrial and mechanical tube products serve mechanical engineering, civil and industrial installations, earth-moving machines, architectural structures, non-oil drilling systems, and gas cylinders.
Our Nisku service point sits within a wider Tenaris pipe supply network for energy, pipeline, low-carbon energy, and industrial projects.
Force TUBULAR SOLUTIONS Inc. A Growing FORCE Force Tubular Solutions specializes in the inspection, repair, machining and manufacturing of oilfield tubulars with 8 facilities located in Fort St. John, BC, Grande Prairie, Clairmont, Nisku, Brooks, Lloydminster, AB and, Estevan, SK. In addition to in-plant inspection, Force also provides mobile field services and repairs including bottom-hole assembly (“BHA”) inspection, transverse electromagnetic (“EMI”) drill pipe inspection, refacing, and straightening.
