Instruments providers deliver focused production products & services services that operators and service firms rely on for scheduled work, callouts, and turnarounds.
ACE Instruments supports oil and gas, commercial, and industrial sites that need instrumentation and electrical work tied to real operating equipment. From Fort St. John, Dawson Creek, and Calgary, ACE handles day-to-day service, project work, repair, calibration, rentals, procurement, and fabrication support around measurement and control systems.
Production facilities bring ACE into work involving chemical injection, valve service, communications, power, and field instrumentation. Stocked instrumentation, valve, automation, control, power, and electrical product lines are backed by service divisions that can install, calibrate, inspect, repair, and automate equipment on site.
ACE has operated since 1989 and presents quality and safety as part of its service model. For instrumentation, electrical service, valve repair, chemical skids, or oilfield rental needs in northeast British Columbia or Alberta, contact ACE with the equipment, site requirement, or maintenance scope.
At Acrolab, we help industrial equipment builders and process manufacturers control heat, cooling, sensing, and temperature uniformity with thermal products and engineering support.
Our Windsor-based operation has more than 70 years of thermal engineering history. Products include Isobar heat pipes, custom heat pipes, thermocouples, RTDs, heating elements, custom control panels, cooling components, accessories, and temperature-management assemblies used across industrial processing and manufacturing.
For process equipment, composite tooling, electronics cooling, plastic welding, pultrusion, sealing systems, and metal tooling, the right thermal component depends on the material, geometry, temperature profile, and control requirement. We also support research and development, thermal analysis, simulations, and engineering when an off-the-shelf heater or sensor is not enough.
For heating elements, temperature sensors, control panels, heat-transfer assemblies, or custom thermal engineering, start with the process temperature, material, geometry, control requirement, and operating environment.
At Aircom Instrumentation, we manufacture and distribute process-control instrumentation from Edmonton for industrial environments that need pressure, temperature, sampling, and measurement hardware.
Our product line includes pressure transmitters, RTD probes, thermocouple assemblies, thermowells, protection tubes, instrument valves, manifolds, orifice plates, pressure gauges, temperature gauges, sample cylinders, sample and injection quills, level chambers, temperature transmitters, signal conditioning, and specialty welding services.
With more than 25 years serving the process-control industry, we work where a measurement point has to survive the process conditions around it. Oil and gas, chemical, and industrial process equipment often need the instrument, material, pressure rating, and connection details to line up before installation.
For pressure, temperature, flow, sampling, or instrument-valve needs, start with the process medium, pressure rating, temperature range, connection details, and material requirements.
Known for our leadership in the industry, we focus on providing our customers with competent and valuable services in occupational health and environmental protection. We're here to meet your needs and exceed them, ensuring that every interaction with us adds value and "Protect What Matters". What we do We pride ourselves on being a manufacturer-trained and authorized service center, where we use only original parts and provide warranties. We operate with unwavering integrity and professionalism.
Alpha Controls & Instrumentation Inc. connects repair planning to the job problem behind the request around industries nationwide. Controls and instrumentation are treated as related parts of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on.
Our repair planning scope starts with the condition of the asset. It can find the fault and choose a repair path. The controls side helps customers connect the request to the job condition and next decision. For customers in industries nationwide, that means the first call can start with the asset, access point, schedule, or part that actually drives the job.
With instrumentation, the important details are fit, access, timing, and handoff. That capability helps customers connect the request to the job condition and next decision. The customer can explain what is broken, what has to fit, and what has to move before the request turns into a quote or service plan. Repair planning changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes repair. That keeps the page close to the source facts without drifting into broad claims.
Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect repair planning with controls so the request can move from a rough need into a clearer service discussion around industries nationwide.
The practical benefit is less confusion at the start of the job. When repair planning is explained through real use cases, the customer can ask a sharper question about the asset, schedule, or site condition. Controls give that request a related path when the first issue turns into a part or repair question. Around industries nationwide, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope.
Planning stays clearer when repair planning remains close to controls. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. industries nationwide sets the local context without turning the description into a street-address block.
The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with repair planning and then connecting it to controls and instrumentation keeps that conversation anchored. This scope connects to repair. Listed as established in 1979, the operation also has a continuity signal for repeat local purchasing. Around industries nationwide, the scope is tied to what a customer can discuss and the operating setting it fits. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next. If a branch or yard is involved, that context can change the quote path and the schedule. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect repair planning to the equipment, people, and schedule behind the request. industries nationwide also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When controls enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories. A stronger request usually names the asset, the location, the timing, and the condition that created the need. Those details help show whether the need is a quick supply question or a deeper repair discussion.
At OM AEROTEK, our skilled team of professionals provide maintenance solutions related to spares procurement & support, maintenance planning, MRO, specialized ground handling equipment, airfield engineering and operations/maintenance safety aspects. If you are looking for a rich and indelible experience, we are here to assist you with every maintenance request. We extend well researched technical advisory services to ensure a hassle-free experience for our clients. Our Mission At OM AEROTEK, we strive to combine unparalleled aviation expertise with innovative thought leadership to address unique and complex challenges.
A gas stream reading has to be accurate while the process is running. AMETEK Process Instruments builds online process analyzers for industrial instrumentation, including Calgary-area access for process plants and energy facilities that measure oxygen, sulfur compounds, and other gas species.
We work with analyzer technologies such as tunable diode laser absorption spectroscopy, ultraviolet spectroscopy, and mass spectrometry. These instruments are used where process control depends on selective measurement in live gas streams.
For fired equipment, the WDG-V flue gas oxygen analyzer adds oxygen measurement for burner management system operation. For sulfur recovery service, the 888 tail gas analyzer monitors hydrogen sulfide and sulfur dioxide in tail gas.
Our process instrumentation is designed for installed plant service, including analyzers that mount directly on process pipe where that arrangement reduces sampling complexity. AMETEK process analyzer conversations usually start with the measured gas, process temperature, pressure, and required response time.
Process measurement is strongest before a burner, pipe, or sulfur recovery unit drifts outside its safe operating range. AMETEK Process Instruments supports Calgary process analyzer needs with instruments built for gas streams and industrial monitoring points.
Our WDG-V flue gas oxygen analyzer adds measurement for burner management systems. That type of analyzer belongs where excess oxygen readings affect combustion control and safe operation.
We use TDLAS measurement for sensitive and selective gas-stream analysis. Pipe-mounted analyzers can reduce remote-optics complexity when the measurement point needs to stay close to the process.
Sulfur recovery tail gas monitoring is another supported application. Analyzer planning starts with the gas species, process location, measurement range, mounting condition, and reliability requirement.
Gas analysis and pollution control depend on instruments that keep measuring after installation. From Scarborough, Ontario, Analygas Systems supplies air quality monitoring, environmental monitoring, instrumentation, and data logging systems for industrial and facility applications.
We specialize in instruments for gas analysis and pollution control. Our systems can include up to 128 sensors, digital and bar graph displays, printed records, and software with a complete data logging package.
Good monitoring also needs service after the sale. We calibrate and repair the gas analyzers and monitors we sell, so the instrument stays aligned with the measurement job.
Our team includes engineers, technologists, computer programmers, sales, design, manufacturing, repair, and service staff. Since 1972, Analygas has built its work around environmental control systems, gas monitoring, and the data management needed to track air quality conditions over time.
Industrial automation, valve service and machinery health monitoring belong close together when a plant is trying to prevent lost time. Atlantic Controls works through Laurentide Controls for reliability needs across Eastern Canada.
From Saint John, our branch connects control technologies with measurement, analysis and asset performance tools for facilities in New Brunswick, Nova Scotia, PEI, Newfoundland and Labrador.
Valve and regulator support sits close to our automation work because process control depends on both the signal and the final control element. Machinery health monitoring adds another layer when rotating equipment needs continuous visibility.
Recent Laurentide projects include AMS 6500 monitoring on critical equipment and a documented industrial valve intervention that reduced operating cost. We use that reliability focus for Eastern Canada plants that need controls, valves and vibration analysis planned together.
From Calgary, Baker Hughes supports Western Canadian wells with wellheads, connectors, and intervention work from construction through abandonment. We bring the right equipment for jobs where access, connection, and repair have to stay controlled.
Pipeline management and gas processing/LNG cover the path from well to plant and terminal. Downstream chemical work supports treatment, while terminal, blending, and transportation services keep product moving through the next handoff.
Cordant digital solutions and iCenter maintenance services connect condition data with planning. Distributed vibration monitoring and machine protection give rotating assets a clearer operating picture. Pressure sensors add another layer of visibility, and our centrifugal pumps are built for harsh-duty service.
We serve oilfield and industrial sites from Calgary with gas processing, LNG, and pipeline management. We also handle subsea systems and well intervention.
We keep digital services, maintenance, and centrifugal pumps in place for harsh conditions.
Natural gas measurement depends on meters and instruments that stay accurate in daily use. From Edmonton, Barchard Engineering Ltd supplies, repairs, and calibrates natural gas meters and instruments for customers across Canada.
We have served the natural gas industry since 1975. Our shop works with diaphragm, rotary, and turbine meters, along with regulators used in gas distribution and consumption.
A meter issue can affect billing, flow control, and pressure management. We check, repair, and calibrate measurement assets so they can return to duty with clear records.
A plant installation or oil and gas project can lose time when instrumentation, calibration, tubing, and electrical hookup are planned as separate jobs. Berja Meter & Controls Ltd delivers instrumentation and calibration services from Edmonton for field and shop needs across Canada and global projects.
We work on oil and gas, chemical, pulp and paper, mining, petroleum, and industrial construction sites. Electrical and instrumentation tubing can be planned together for construction projects that need fewer handoffs between trades.
Our shop service background includes more than 30 years of instrumentation and calibration work. Field service includes instrument construction, tubing installation, piping, hook-ups, and modularized equipment installation.
Flow measuring equipment, pressure recorders, gauges, meters, and meter proving all connect to the same control problem: knowing what the process is doing and keeping the reading dependable. Our Edmonton team can plan field installation or shop calibration around the asset and project stage.
Chemical injection problems show up fast when a pump loses accuracy or a field repair takes too long. Bruin Instruments Corporation manufactures Bruin Pumps chemical injection equipment in Edmonton for oil and gas fields across North America and global markets.
We build pneumatic and electric metering pumps, chemical injection systems, and pump packages for oil and gas dosing service. These systems are used where chemicals have to be delivered at controlled rates into production, pipeline, or facility processes.
Our Edmonton facility also handles service, repair, and exchange programs for chemical injection pumps and glycol circulation pumps. When a gas regulator, motor valve, double diaphragm pump, or drum pump needs shop attention, the exchange path can reduce downtime.
Founded in 1990, Bruin Instruments has focused on pump manufacturing and repair for oil and gas chemical handling. Our work connects Pumps-Chemical, Pumps-Glycol, instruments, and valves to the same operating need: controlled fluid movement in demanding field conditions.
We provide non-destructive examination and testing for industrial assets across Western Canada. Pipeline inspection is a core part of the offering. Pressure vessels and tanks are part of the assets we inspect.
We also use real-time reporting to keep findings organized for maintenance planning. Our head office is in Edmonton.
In Business Since 1961 CPW Valve & Instrument is a Canadian Manufacturer of high quality, precision pressure instruments, used in a variety of applications around the world. What began in 1961 as an instrument repair business has evolved into a full-fledged manufacturing operation. We are housed in a modern plant located in Edmonton, Alberta, Canada.
Industrial instrumentation keeps site data steady. We represent equipment lines for power transmission, vibration monitoring, and process weighing. Our engineering and consultation support helps match the right solution to the site and the application.
We also handle commissioning and on-site inspections. Calibration and system checks are part of the scope too. We serve oil and gas, mining, and forest sites. Chemical and packaging sites are also in reach. Agriculture, food, and OEM sites are in reach too.
From Edmonton, we help teams with practical guidance for installed equipment. If a specific instrument or system check is needed, we can map the next step.
A missed gas alarm or drifting pressure reading can slow a startup and raise risk on an industrial site. Carbon Controls Ltd supplies gas detectors, instrumentation, and instruments from Calgary for Western Canadian facilities that need reliable measurement, control, and alarm equipment.
We have operated in Canada since 2001 as an instrumentation, electrical, and controls supplier. Our product lines include fire and gas detectors, alarm signalling devices, electrical motor control, and harmonic solutions.
Field measurement depends on the right instrument for the process condition. We work with flow, level, temperature, and pressure instrumentation, along with wireless automation solutions for sites that need equipment data without a full wired installation.
Our service department handles commissioning, startups, equipment repairs, field measurement, and onsite assistance. Calgary service planning can focus on a detector issue, a control panel need, a measurement point, or an instrument repair tied to an active facility.
is one of Canada’s leading suppliers of instrumentation to the industrial, utility and government marketplaces. Since incorporation 40 years ago, our goal has been to provide our Canadian customers with premium quality instruments and systems from world-renowned manufacturers and to continue to provide innovative technologies to meet their ever growing demands for solutions to their systems needs. Our growing portfolio of products includes leading edge, innovative products for electrical test and measurement as well as advanced Sub-Station automation and control. In support of all products we supply, our in-house and field service technicians have been factory trained and certified thus providing fast and efficient resolution to our customers’ instrument problems.
We are a service oriented company, dedicated to developing long term partnerships with our customers throughout the world. Our technology, reliability and integrity, have made us the recognized leader in the calibration of flow and pressure measurement devices. We encourage our customers to provide us with any feedback to ensure we consistently meet their requirements. Coastal Instruments makes every effort to comply with U.S.
We are professional and thorough in everything we do, ensuring your complete satisfaction at all times with superior service at competitive rates. Our sales and service teams can provide complete turn-key maintenance packages for all your industrial compressed air needs. Air Compressor Servicing & Maintenance At CFM, we offer a variety of environmentally-friendly solutions for your business including: -Variable speed compressors, which cut your hydro costs significantly compared to traditional air compressors. -Oil/Water separators, which help to separate oil from water and avoid the oil being dumped into the local sewer system and contaminating the water supply.
Concept Controls Inc. ties controls to a real job condition around Calgary, AB. The nearby scope includes environmental and gas detectors. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our controls scope starts with the condition of the asset. It can connect the request to the job condition and next decision. The environmental side helps customers connect the request to the job condition and next decision. For customers in Calgary, AB, that means fewer vague calls and a better start for quoting or planning.
With gas detectors, the important details are fit, access, timing, and handoff. That capability helps customers prepare people for hazards and response needs. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Most industrial calls start with something practical. A part has to be made. A unit has to be checked. A system has to keep running. We frame controls with environmental so the next step can be tied to the asset, timing, and site condition. In Calgary, AB, that may mean a shop visit, a branch conversation, a field dispatch, or a quote request tied to a real job.
This kind of detail also reduces handoff risk. If the first call is about controls, the customer can still see when environmental belongs in the same discussion. Calgary, AB adds the local planning layer, especially when timing, access, or branch response affects the job. That keeps the request from bouncing between unrelated categories.
The detail should also help a customer decide what to do next. A person can check whether controls belongs in the first call. They can also see when environmental should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when controls remains close to environmental. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Calgary, AB sets the local context without turning the description into a street-address block.
A good close should leave the customer with a practical next conversation. That starts with controls and may extend into environmental and gas detectors. Calgary, AB gives the location context without copying a full address. The next move should be clear: ask about the service, the asset, the timing, or the quote path. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use controls as the anchor, then bring in environmental where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether controls belongs in the first call. They can also see when environmental should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when controls remains close to environmental. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Calgary, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use controls as the anchor, then bring in environmental where it helps clarify the next step. That keeps the path helpful without adding a loose series.
has been eastern Canada’s leading provider of valves and instrumentation solutions to industrial, commercial and institutional customers. Industries served include power generation, pulp and paper, water treatment, chemicals, refining, pipelines, electricity distribution and many more. With sales and service offices across central and eastern Canada, Contro Valve has the necessary facilities and competence to meet the requirements of its demanding and diverse customer base. has evolved from being solely a sales representative to being a full service valve assembly, instrumentation and repair company.
A control panel has to leave the shop ready for field conditions, not just wired to a drawing. Control Innovations Inc builds industrial control and instrumentation assemblies in Calgary for Western Canada’s energy and manufacturing sites.
We started in 2000 as a Calgary shop focused on dependable controls and instrumentation. Today our work moves from design and assembly into automation, field service, and support when a control system needs to be installed, checked, or adjusted on site.
Testing and calibration are part of the job before a panel or control package goes into service. We validate performance so instruments, panels, and control systems are ready for plant, pump, process, or industrial equipment use.
Our Calgary team joined M-Power Group of Companies in 2025 and now works alongside Solution Control Systems in Edmonton. That gives Western Canada customers a wider controls shop base for industrial automation and instrumentation work.
Reservoir decisions need lab data that can stand up to field planning. Core Lab works from Estevan, SK with reservoir description and production enhancement for oil and gas assets where core, fluid, and production data guide recovery choices.
We focus on advanced analysis, expert consulting, and proprietary products used to understand rock and reservoir behavior. That work helps define where hydrocarbons move, how wells perform, and which recovery plan has the strongest technical basis.
Our instruments and tools are tied to reservoir optimization, not general hardware supply. We develop products and methods for petroleum work where measurement quality affects production planning and asset value.
Core Lab was established in 1936 and has built its name around petroleum innovation. Our Estevan office connects local Saskatchewan service needs with a broader technical base in reservoir and production work.
Seismic work depends on accurate field position, clean acquisition planning, and steady coordination between permits, survey, drilling, and recording. Eagle Canada delivers Consultants-Seismic services from Calgary for exploration programs that need those steps controlled in sequence.
Our project managers stay active from permitting and surveying through shot hole drilling and acquisition. That gives seismic programs one field plan for access, layout, operational requirements, and client communication.
We use instruments, meters, tools, and recording systems that support seismic field accuracy. One option combines RTK and recording GPS data from wireless recording equipment with sub-meter navigation tools.
Eagle Canada has operated since 1976. Our Calgary seismic team is built for projects where field data, drilling support, and acquisition timing must fit the same operating plan.
Confined-space entries, shutdowns, and industrial maintenance need air monitoring gear ready at the start of the shift. Electrogas Monitors Ltd in Red Deer supplies gas detectors and breathing air rental packages across Western Canada.
Drug and alcohol testing devices sit beside our workplace safety products and instruments. Drager testing devices handle the monitoring side, while X-plore 8000 and 8500 head kits with HEPA filters cover respiratory protection needs.
Branches in Sherwood Park, Calgary, and Abbotsford extend the supply path beyond Red Deer. We help temporary projects, site turnaround activity, and jobs where monitored air or screening gear has to be ready before field activity starts.
Industrial plants need valve and instrument data they can act on while equipment is still running. In Edmonton, Emerson Automation Solutions connects Valves and Instruments with automation technologies for high-stakes industrial operations.
We work with final control products such as valves, digital valve controllers, actuators, and regulators. These products help process facilities control flow, pressure, and equipment response in demanding conditions.
Our measurement instrumentation gives real-time data for essential applications. That can include wireless measurement and analytical instrumentation where plant teams need reliable readings from active systems.
Emerson brings a global support network and local expertise to industrial automation planning. Our Edmonton automation and valve support can be matched to existing systems, modernization plans, and critical facility control needs.
Measured gas data gives a facility a clearer path when air quality problems are hard to see. Through EnviroRentals and Gasonic, we support Calgary environmental monitoring with gas monitoring, calibration, indoor air quality testing, and instruments for building and facility air control.
Our Environmental Monitoring Equipment focus is tied to gas detectors and air quality instruments. These tools help identify hazardous gas concerns, track indoor air conditions, and guide corrective work in occupied buildings or industrial facility spaces.
Gasonic has been Alberta owned and operated for 40 years. Since 1985, our team has worked around gas monitoring, calibration, indoor air quality, and light solutions.
For Environmental Monitoring in Calgary, we keep the conversation centered on clean air, measurement, and practical equipment needs for facilities that cannot rely on a once-a-year checklist.
Hot valves, process piping, and engine exhaust systems need insulation that can be removed for service and put back in place. Firwin Corporation manufactures reusable insulation covers and insulation jackets from North York, ON for industrial and oil and gas applications.
We build removable insulation for valves, instruments, flanges, piping, diesel engines, gas powered generating stations, gensets, and off-road equipment. The goal is practical thermal control around assets that still need inspection or maintenance access.
Our main product lines include removable and reusable insulation blankets, Hard Coat composite insulation, and Metal Foil Insulation. Each product family is shaped for a different site need, such as durability, cleanability, or a permanent thermal barrier.
Oil and gas applications are supported through Firwin ThermoWrap, along with industrial insulation work for process and steam line components. Our North York manufacturing base handles custom insulation where standard covers do not match the asset shape or heat condition.
Plants and municipalities that need to measure liquids without ever touching them rely on ultrasonic instruments to do the job. That is what we make. Greyline Instruments Inc designs and builds ultrasonic flow and level monitoring equipment from our facility in Long Sault, Ontario, near Cornwall.
Our instruments include open channel flow monitors, ultrasonic level transmitters, and flow meters. They use a non-contacting sensor with no moving parts, so they hold up well in dirty or corrosive liquids where ordinary meters fail. Customers find them in water and wastewater treatment, along with a range of process and industrial settings.
We have been at this since 1986 and ship our products to customers around the world. Our own research facility lets us test both closed pipe and open channel systems before they leave the building. If you need reliable flow or level measurement for a tough application, contact us and we will help you pick the right model.
A producing well can lose efficiency when fluid levels, pump performance, or downhole conditions are not measured clearly. Hamdon Energy Solutions works from Edmonton in Production Optimization, Bottomhole Pressure Surveys, Dynamometers, and Fluid Level-Determination for upstream oil and gas clients in Canada and abroad.
Since 1996, we have supplied measurement instruments and well testing technology for drilling, completion, and production decisions. These tools help define what is happening in the well before repair, adjustment, or regulatory action is planned.
Our service team also handles equipment training, equipment repair, regulatory compliance, and optimization service. Training Services are tied to the instruments and field methods our clients use, so the measurement process stays practical at the wellsite and in the shop.
Hamdon Energy Solutions also works with Cementing Equipment, Mud-related applications, and production optimization products when those needs connect to upstream well efficiency. Our Edmonton base supports field service, repair planning, and instrument supply for oil and gas operations that need accurate measurement before the next step.
Field data is only as good as the instrument used to collect it. Hoskin Scientific supplies Environmental Equipment, Data Loggers, Gauges, Instrumentation, Instruments, and Meters from Vancouver for environmental, industrial, and geotechnical monitoring across Canada.
We have worked in scientific and environmental instrumentation since 1946. Customers can buy or rent equipment when a project needs water parameter monitoring, vibration monitoring, gas measurement, or locating tools such as rebar and cover meters.
Rental instrumentation helps short-term site programs avoid a full equipment purchase. That can suit remediation checks, facility testing, geotechnical monitoring, and industrial investigations where the measurement window is limited.
Our Vancouver branch connects Western Canada projects with instrument selection, rental planning, and service for monitoring systems used in field and facility conditions.
Well intervention and tubular work depend on threads, tools, and pressure-control systems that fit the well plan. Hunting Energy Services Canada connects Calgary oilfield work with Hunting's global manufacturing, connection technology, and intervention product lines.
Our OCTG path covers premium connection technologies and tubular supply for energy and geothermal markets. Advanced manufacturing adds precision tubular components, deep-hole drilling, and complex turned or milled profiles for oil and gas applications.
For producing wells, Hunting publishes well intervention products for logging and other well services. Pressure control, slickline, e-line, control and injection, thru-tubing, and Opti-TEK well test systems sit in that intervention path.
Hunting also manufactures perforating and logging systems, energetics, instrumentation, wireline firing systems, release tools, setting tools, and TCP firing heads. Calgary is the local company record, while the source evidence supports a global energy manufacturing and service network rather than a single-branch inventory promise.
Hydraulic testing and hydro-testing need equipment that can prove a system before it returns to service. From Mount Pearl, Hyflodraulic Limited works with oil and gas, marine, construction, mining, energy, and heavy industry clients across Atlantic Canada.
Fluid power problems often show up as pressure loss, poor motion control, heat, or contamination. Our technical team handles motion control, fluid power, and mechanical systems design, along with troubleshooting and maintenance for equipment that has to run in demanding field or plant conditions.
Instrumentation technicians work on automation production systems where controls, measurement, and maintenance have to line up with the mechanical system. We also distribute specialized products and equipment for mining, oil and gas, construction, and energy applications.
Our Mount Pearl shop and field capability are built for hydraulic repair, hydro-testing, hot oil flushing, instrumentation, and mechanical service where downtime affects production or site access.
