Well testing and flowback projects need rental equipment that arrives ready for pressure, measurement, and field handling. 10K Rentals supplies oilfield equipment rentals from Grande Prairie, with support for well testing, frac flowback, production testing, heaters, tanks, valves, and testing equipment.
We support gas well testing, production testing, frac flowback tools, test equipment, rental tanks, heaters, valves, and field rental packages. The site lists 24/7/365 availability and Grande Prairie office contact details, which matters when testing work moves outside normal hours.
For producers and testing contractors, 10K is useful when a project needs rental equipment selected around reservoir evaluation, flowback, or production-testing requirements rather than general construction rentals.
Abra Controls specializes in wireless surface pressure monitoring for Mini Frac, DFIT, offset well monitoring during frac operations, and hydrostatic testing.
Abra describes an all-in-one wireless design that reduces the payload technicians bring onto a lease, shortens setup time, and streams pressure data while the operation is still underway. Pressure information can be reviewed during the job instead of after equipment has already left location.
Completions and pressure-test work can depend on clear readings from nearby wells, surface pressure changes, and regulatory monitoring points. Offset well monitoring and DFIT work both need reliable pressure recording, fast field setup, and data that can be reviewed while decisions are still being made.
For frac offset monitoring, DFIT pressure work, or hydrostatic testing support, Abra Controls can scope the monitoring points, lease conditions, and data requirements for the job.
Access Waterwells Inc gives electrical a practical operating frame around Western Canada. Pump work is treated as a related part of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on.
Our electrical scope starts with the condition of the asset. It can connect the request to the job condition and next decision. The pump work side helps customers match fluid movement and repair choices to the site. For customers in Western Canada, that means the first call can start with the asset, access point, schedule, or part that actually drives the job.
Electrical changes from one setting to another. A shop repair, plant issue, field call, or branch pickup can all create a different kind of request. The job context here includes oil and gas. That keeps the page close to the source facts without drifting into broad claims. The service conversation should move quickly from label to task. With electrical and pump work, that means naming the asset, the failure point, the supply need, or the site condition early. Around Western Canada, that keeps the request grounded in the place where the job will actually happen.
The practical benefit is less confusion at the start of the job. When electrical is explained through real use cases, the customer can ask a sharper question about the asset, schedule, or site condition. Pump work gives that request a related path when the first issue turns into a part or repair question. Around Western Canada, local access and response planning can shape the schedule. The result is a clearer path from first contact to workable scope.
Planning stays clearer when electrical remains close to pump work. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Western Canada sets the local context without turning the description into a street-address block.
The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use electrical as the anchor, then bring in pump work where it helps clarify the next step. That adds depth without copying a loose series from the source page.
The right next step depends on the job. It may be a worn part, a planned build, a field repair, a shop drawing, a rental need, or a supply decision. Starting with electrical and then connecting it to pump work keeps that conversation anchored. This scope connects to oil and gas. Listed as established in 1969, the operation also has a continuity signal for repeat local purchasing. Around Western Canada, the scope is tied to what a customer can discuss and the operating setting it fits. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect electrical to the equipment, people, and schedule behind the request. Western Canada also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When pump work enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories. A stronger request usually names the asset, the location, the timing, and the condition that created the need. Those details help show whether the need is a quick supply question or a deeper repair discussion. If the same job moves toward fabrication or inspection, the customer still has a way to keep the conversation connected. Rental planning and field response can also change the schedule when the source evidence supports those capabilities. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next.
Mobile production testing has to follow Alberta oil and gas jobs without turning the lease into a larger footprint than the program requires. Accuracy Online Production Testing has served the Alberta oil and gas industry from Red Deer since 2000.
We focus on low-imprint testing applications for wells and field projects that need a mobile setup. Frac recovery and pipeline bleed-offs are part of the testing scope. Those applications give field teams a mobile option when fluids and pressure have to be managed on location.
Equipment, quality, and safety are presented as core parts of the operation rather than afterthoughts. That structure is important on testing jobs where measurement, containment, and field readiness have to move together.
For Alberta production testing or frac-recovery work, we can help scope the mobile testing requirement and site constraints before the equipment is scheduled.
Since 1987, we have focused on oil and gas well testing from Lac La Biche.
Our gas well testing work helps characterize reservoir potential. We also handle reservoir optimization and technical support for field decisions.
We stay close to the practical needs of production and the data that guides it.
Caliber Test Separators Ltd provides Production Testing, Gas Well Testing services to oil and gas operators in Red Deer County, AB and across Western Canada.
Cathedral Energy Services Ltd provides Directional Drilling-Equipment & Service, Production Testing, Gas Well Testing services to oil and gas operators in Calgary, AB and across Western Canada.
Centennial Well Testing has been Red Deer's locally owned well testing specialist since 2005. Our trailer-mounted test units handle nitrogen injection, flowback, pressure testing, SAGD, coiled tubing, frac flow back, and sour service with the flexibility and response time that larger companies cannot match.
A test package or weld repair can slow a well handoff when the gear is not ready for production. Coral Oilfield Services Inc in Grande Prairie builds and repairs oilfield equipment for production testing and gas well testing across Alberta.
Our shop work includes fabrication and welding for field equipment that has to move from the bench to the wellsite without extra handling. We keep the repair or fabrication scope tied to the test spread and the production schedule.
The Grande Prairie head office keeps us close to Peace Region activity, and the operation is set up for safe, efficient start-up work. When production testing and fabrication need to stay in one workflow, we stay with the job from shop to site.
Exploration and completion programs need test equipment that can move with the well plan. Dark Star Production Testing Ltd. handles production testing and gas well testing from Red Deer for Alberta oil and gas wells.
We have operated in Alberta since 2006. Our field offering is built around well completions, production testing, testing equipment, and the tools needed through different phases of exploration.
Tank capacity is part of the way we plan changing site conditions. Our fleet includes 15 tanks in different sizes, supported by related equipment for oil and gas testing needs.
Pipeline support and pigging are included when they connect to the well testing or flowback scope. We plan each setup around expected fluids, site access, and the information needed from the test.
Production testing loses value when heat, water, flowback, and data collection are planned too late in the field schedule. Demon Oilfield Services works from Crossfield on production testing and fluid heating for Western Canadian oil and gas sites.
We started in 2006 with production testing and later added water management. That path fits jobs where the well test, flowback package, and winter conditions have to line up before the crew is waiting on location.
The ROJO Diablo Superheater gives us a field heating option with tri-fuel capability across diesel, propane, or natural gas. Flowback tanks and flare stacks can be planned with boilers or office trailers when the location needs a broader field package.
Fin Design adds custom welding and fabrication when standard rental gear does not match the site. For a Demon request, the practical planning points are test objective, heating demand, fluid volume, flare path, fabrication need, and Crossfield dispatch timing.
Equipment and trained people for oil and natural gas production and operations. Based in Grande Prairie, Alberta, serving Western Canada including the Montney and Duvernay. Based in Grande Prairie, AB.
Ensign Energy Services is a global land-based oilfield service contractor providing drilling, well servicing, and related technical services to the oil, natural gas, and geothermal industries. Core services include contract drilling (shallow, intermediate, and deep wells using technologically advanced rigs including ADR Automated Drilling Rigs), directional and horizontal drilling with MWD/LWD and downhole motors, well servicing and workovers, managed pressure and underbalanced drilling (MPD/UBD), and oil sands coring. Ancillary services include equipment rentals (BOPs, solids control, pumps, drill pipe), production flow-back and testing, transportation and rig mobilization, digital automation solutions (EDGE AUTOPILOT), and power management including generator rentals and Battery Energy Storage Systems (BESS). Ensign operates primarily in Canada, the United States, Latin America, the Middle East, and Australia.
With a commitment to safety, performance and dependability, Grant PTS is an industry leader in oilfield well-testing services. Based in Calgary, Calgary, AB.
Greywolf Production Systems Inc provides Coiled Tubing Service, Production Testing, Gas Well Testing services to oil and gas operators in Crossfield, AB and across Western Canada.
Incinerator Technology Inc. specializes in the development and manufacturing of waste gas incinerators that maximizes burn efficiency and eliminates the visible flame, smoke and odor generated by oil and gas well production testing. Based in Red Deer, Red Deer, AB.
When industrial facility controls drift, the panel, wiring, and startup sequence no longer match the site. JayJaxx Controls Inc. handles programming and automation from our Grande Prairie head office for Alberta industrial projects.
We also handle instrumentation and electrical scopes for onsite retrofits and custom panel fabrication. That keeps the control change aligned with the installed machinery.
Our E&I personnel keep the upgrade path clear from startup through life cycle maintenance. We keep the scope tied to the installed system and the next operating step.
TARA Energy Services announces the acquisition of Lyons Production Services, enhancing market presence and innovation in oil & gas production testing. Based in Grande Prairie, AB.
Water supply work can stall a farm, acreage, commercial site, or oilfield location when the well, pump, or haul plan is not ready. From Strathmore, M & M Drilling Co Ltd handles Water Well Drilling and related water services across Alberta, southwestern Saskatchewan, and southeastern British Columbia.
We drill water wells, install casing, clean wells, and abandon wells when a site needs a proper closeout. Artesian well work is also part of our drilling scope in Wheatland County and the wider service area.
M&M Pumps Inc. adds pump installation and service for the same water system needs. We also handle pressure system work when a well requires dependable delivery after drilling.
Production Testing is available for residential, commercial, and oilfield water applications. Water Hauling and conditioning can be planned around access, timing, and the water demand at the site.
MJM Manufacturing MJM Manufacturing, Inc. has a rich legacy dating back to 1979 when Mike Mijares founded the company as a one-man operation in a two-car garage. With a steadfast commitment to quality, competitive pricing, and on-time delivery, MJM has grown to serve Fortune 500 companies, multinational corporations, and local businesses from its modern 43,000 sq ft facility. Today, with over 80 dedicated employees – many with over 45+ years of experience – MJM offers a wide range of services including silk screening, powder coating, painting, plating, welding, machining, assemblies, rack enclosures, and precision sheet metal fabrication.
Mustang Production Testing Ltd is best understood through the customer job behind inspection around Red Deer, AB. The scope stays narrow, so the service has to be explained through real use instead of loose categories. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make.
Our inspection scope starts with the condition of the asset. That capability helps customers check condition before the next stage starts. For customers in Red Deer, AB, that means fewer vague calls and a better start for quoting or planning.
Inspection can mean different things in a shop, plant, field, or branch setting. Here, the published details connect it to oil and gas and custom work. That gives customers a better way to place the service in a real job.
A narrow service label is rarely enough on its own. The stronger question is what has to be built, repaired, checked, moved, or kept online. We use inspection as the anchor and bring in inspection where it helps define the next step in Red Deer, AB.
The value is not just in naming inspection. It is in showing how the scope connects to an asset, location, or schedule. Inspection gives the customer another route when the first need changes. That makes the page more helpful without turning it into a long service series.
Planning stays clearer when inspection remains close to inspection. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Red Deer, AB sets the local context without turning the description into a street-address block.
The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use inspection as the anchor, then bring in inspection where it helps clarify the next step. That keeps the path helpful without adding a loose series.
The final test is whether the service path feels clear. Inspection should point to a real job discussion, not a category dump. This scope connects to oil and gas and custom work. In Red Deer, AB, that means connecting the capability to a branch, shop, field, or project decision the customer can act on. The detail should also help a customer decide what to do next. A person can check whether inspection belongs in the first call. They can also see when inspection should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when inspection remains close to inspection. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Red Deer, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use inspection as the anchor, then bring in inspection where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether inspection belongs in the first call. They can also see when inspection should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. The detail should also help a customer decide what to do next. A person can check whether inspection belongs in the first call. They can also see when inspection should be part of the same conversation. That keeps the path practical without adding sectors that do not belong.
A reliable water source on a farm, acreage, or work site starts with the well and the pressure system behind it. From High River, Niemans Water Systems LTD handles water well drilling, pumping and pressure systems, well maintenance, and flow testing across southern Alberta service areas.
We sell, install, and service Goulds pumps along with complete pressure systems. That pump scope serves houses, farms, and work sites where water pressure and system service need to be handled together.
Well maintenance can involve rehabilitation, acidizing, casing brushes, descaling, developing, and proper shock chlorination. When the job calls for testing, our scope includes production testing, real estate testing, oil/gas/seismic flow tests, and Q20 flow testing.
Niemans has roots in water well drilling going back to 1980. Our High River team connects drilling, pumps, treatment systems, and flow testing into practical water system planning for rural and field-service needs.
Complex production tests need pressure control, clean data, and field gear that can handle changing well conditions. TARA Energy Services works from Grande Prairie on production testing and oilfield rental packages for oil and gas sites across North America.
We started in 2013 to solve difficult flowback and production testing problems with custom field packages. Our high-pressure fleet is built for wells where rates, pressure, and emissions goals must be managed together.
Safety training, inspections, and site standards shape each test plan. Our Grande Prairie team can discuss high-pressure test scope and rental needs for Western Canadian wells and beyond.
During frac flowback, bleed offs, and workover planning, test data has to come from field service built for the well condition. Proflo Production Testing handles Production Testing and Gas Well Testing from Red Deer for oil and gas sites across Western Canada.
We have served the oil and gas industry since 1993. Our field service covers multi-stage fracs, shallow gas, sour workovers, and abandonments where mobility and careful site setup are part of the job.
Zero ground disturbance capability supports testing where surface impact has to stay controlled. That field approach fits gas wells, abandonment programs, and locations where access or land conditions shape the test plan.
Proflo Production Testing is locally owned and operated in Red Deer. Our production testing service is built around experienced field execution and Western Canada well conditions.
Pure Energy Services Ltd provides Wireline Services, Production Testing, Swabbing, Perforating, Logging-Production Services services to oil and gas operators in Calgary, AB and across Western Canada.
Red Deer Ironwork offers full-service manufacturing, oilfield fabrication, and recertification services in all major Canadian and U.S. oil sands and shale basins Based in Red Deer, Red Deer, AB.
Silver Stream Production Services Ltd provides Production Testing, Gas Well Testing services to oil and gas operators in Red Deer, AB and across Western Canada.
Flowback work needs the right pressure and separation package before the wellhead-to-flare-stack path is built. Source Energy Sales & Rentals supplies completions, testing, production, and servicing rentals from Red Deer County and Grande Prairie.
Our rental line is built around flowback, separation, and pressure packages. Well stimulation and well servicing jobs can add temporary field gear for flow control, measurement, and site setup.
Source Energy is an authorized distributor of ANSON Flowline Equipment. Sales and surplus inventory can cover valves and chokes, manifolds and flare gear, or tanks and related flowline parts when the rental plan needs more than one item.
Rental and customer-owned gear still has to be ready after demanding field use. We provide recertification, repair, and maintenance so the next job starts with less uncertainty.
Our Commitment We are dedicated to delivering reliable and efficient solutions tailored to meet the unique demands of the oil and gas industry. Stack utilizes the highest quality well-testing equipment that is maintained to the highest degree, ensuring precise results and seamless project execution. We understand the complexities of Alberta’s energy sector and are committed to supporting our clients with top-tier service and innovative testing strategies. Safety and Environmental Responsibility At Stack Production Testing, safety and environmental responsibility are at the heart of our operations.
Getting oil and gas wells to keep producing day after day takes hands-on attention in the field. Sunpro Production Service Ltd works in that space, based in Rocky Mountain House, Alberta, with a second office in Red Deer. This part of central Alberta is busy with active wells, and we serve the companies running them.
Our focus is on production operations and field consulting. That means helping keep wells and surface equipment running, troubleshooting day to day issues at the wellsite, and giving experienced guidance on how to run a lease safely and efficiently. We work alongside the people who own and operate the wells in this region.
We stay close to the field we serve, so a call out does not mean a long wait. If you run production in the Rocky Mountain House or Red Deer area and need steady, knowledgeable help keeping it online, get in touch and we will see how we can pitch in.
Well testing can lose time when equipment has to be hauled, staged, and tied in before readings begin. TC Mobile Vessels Limited handles mobile production testing and gas well testing from Brooks, Alberta for oilfield sites in Alberta and Saskatchewan.
We bring production testing equipment to the wellsite so flow, pressure, and production data can be gathered with less field delay. That service is built for oil and gas wells that need practical test results without adding avoidable trucking or setup steps.
Our mobile testing approach is aimed at efficient, cost-controlled field work. We focus on safe production tests that help keep oilfield decisions moving during evaluation, cleanup, and operating checks.
For Alberta and Saskatchewan wellsite planning, our Brooks team can discuss mobile production testing needs, field access, and the test setup required for the well.
TNT Production Testing Inc provides Production Testing, Gas Well Testing services to oil and gas operators in Sylvan Lake, AB and across Western Canada.
