Control & Control Systems

Winnipeg, MB, Canada

ABCO Supply & Service supports industrial facilities from Winnipeg with the trades needed to install, repair, and maintain process systems, building services, and production equipment. Established in 1972, ABCO brings process piping, equipment installation, electrical work, instrumentation, controls, gas fitting, refrigeration, plumbing, and millwrighting under one Winnipeg contractor. On plant or shop projects, one change can touch several trades before the system is safe to put back into service. The service range covers fabrication, installation, testing, and commissioning of process components, along with preventative millwright maintenance, automation and measurement work, industrial refrigeration, plumbing systems, and qualified gas-fitting support. ABCO also emphasizes training, safety, and procedure review, which helps industrial work move through site requirements without treating compliance as an afterthought. For facility upgrades, process-piping work, refrigeration service, or multi-trade maintenance around Western Canadian plant environments, ABCO can start with the project scope, the trades required, and the equipment being tied in.

Windsor, AB, CAN

At Acrolab, we help industrial equipment builders and process manufacturers control heat, cooling, sensing, and temperature uniformity with thermal products and engineering support. Our Windsor-based operation has more than 70 years of thermal engineering history. Products include Isobar heat pipes, custom heat pipes, thermocouples, RTDs, heating elements, custom control panels, cooling components, accessories, and temperature-management assemblies used across industrial processing and manufacturing. For process equipment, composite tooling, electronics cooling, plastic welding, pultrusion, sealing systems, and metal tooling, the right thermal component depends on the material, geometry, temperature profile, and control requirement. We also support research and development, thermal analysis, simulations, and engineering when an off-the-shelf heater or sensor is not enough. For heating elements, temperature sensors, control panels, heat-transfer assemblies, or custom thermal engineering, start with the process temperature, material, geometry, control requirement, and operating environment.

Calgary, AB, Canada

Remote measurement loses value when field data cannot be checked from the control side. Advanced Measurements Inc. works from Calgary on control and control systems, remote instrumentation, and monitoring systems for industrial measurement environments. We focus on the link between instruments, controls, and the software screens used to read operating data. That work can help a shop, plant, or field asset keep measurement information visible when equipment is away from the office. Data loggers and monitoring systems are part of the same practical need: recording conditions and making them available for review. Our Calgary team keeps the profile narrow because the public source identifies control, remote instrumentation, and monitoring systems as the supported scope.

Edmonton, AB, Canada

At Aircom Instrumentation, we manufacture and distribute process-control instrumentation from Edmonton for industrial environments that need pressure, temperature, sampling, and measurement hardware. Our product line includes pressure transmitters, RTD probes, thermocouple assemblies, thermowells, protection tubes, instrument valves, manifolds, orifice plates, pressure gauges, temperature gauges, sample cylinders, sample and injection quills, level chambers, temperature transmitters, signal conditioning, and specialty welding services. With more than 25 years serving the process-control industry, we work where a measurement point has to survive the process conditions around it. Oil and gas, chemical, and industrial process equipment often need the instrument, material, pressure rating, and connection details to line up before installation. For pressure, temperature, flow, sampling, or instrument-valve needs, start with the process medium, pressure rating, temperature range, connection details, and material requirements.

Calgary, AB, Canada

Based in Calgary, AB, AspenTech Canada Ltd specializes in Control & Control Systems.

Edmonton, AB, Canada

Automatic Controls handles HVAC controls and industrial instrumentation from Edmonton. We work on commercial, institutional and industrial construction projects. Our shop keeps controls and automation equipment on hand for field and facility needs. Early contracts for Syncrude Canada and Saskatchewan Power Corporation show our history in demanding industrial environments.

Edmonton, AB, Canada

We engineer custom machines in Edmonton for industrial production. We also upgrade existing equipment and design control systems with sensors and electrical controls. Our shop brings machining, fabrication, and welding into the build path from prototype to automation.

Edmonton, AB, Canada

A drifting control valve can move pressure and flow off target fast. CVS Controls manufactures control valves and associated instrumentation from Alberta for oil and gas, pipeline, and process plants around the world. We focus on control valves, instrumentation, automation, and performance services because those pieces sit in the flow path. Valve bodies, actuators, and positioners work as one control package. Instruments close the loop on performance. Our machining and automation division in Nisku supports manufacturing, assembly, and product support from a Canadian base. That keeps build and support work tied to the same technical team. Meters and pumps can sit in the same plant conversation when the valve duty is clear. We keep the focus on control valve selection, instrumentation, and performance service.

Camrose, AB, Canada

We are a service oriented company, dedicated to developing long term partnerships with our customers throughout the world. Our technology, reliability and integrity, have made us the recognized leader in the calibration of flow and pressure measurement devices. We encourage our customers to provide us with any feedback to ensure we consistently meet their requirements. Coastal Instruments makes every effort to comply with U.S.

Saskatoon, SK, Canada

Control problems become expensive when panels, instruments, SCADA, and control rooms do not speak clearly to each other. Delco Automation Inc designs automation and Control & Control Systems from Saskatoon for process facilities, compressor control panels, water treatment plants, and integrated security projects. We handle consulting when a site needs a defined technical answer. We can also take turnkey responsibility when the job needs engineering, manufacturing, integration, and commissioning managed as one automation project. Our technical work includes SCADA, DCS, PLCs, information systems, instrumentation, measurement, telecommunications, and control centers. Those systems are built for facilities that need clear operating data, reliable alarms, and practical control over process equipment. Industrial and infrastructure clients come to us for advanced process automation, water and wastewater treatment controls, integrated security, and control systems manufacturing. Our Saskatoon team plans each control package around the asset, the operating environment, and the handoff from design to field startup.

Edmonton, AB, Canada

Facility controls have to manage comfort, energy use, and equipment response without making maintenance harder. Excalibur Control Products Inc. works from Edmonton as a Control & Control Systems distributor and designer for HVAC controls and Direct Digital Control systems across Western Canada. We work with independent control, mechanical, and electrical contractors on energy management and comfort control applications. That service path can include product selection, system design, project management, and commissioning for commercial, institutional, and industrial facilities. Our product line includes HVAC control manufacturers such as Honeywell, Johnson, Siemens, Kreuter, and White Rogers. As an authorized stocking distributor, we can match control parts and DDC system needs to building automation problems that show up in real facilities. Since 1999, our Edmonton team has focused on HVAC control products and proven systems for Western Canada. Industrial customers can use our control and control systems experience when facility automation, mechanical coordination, or electrical contractor planning needs a clear product path.

Calgary, AB, Canada

Wellsite automation fails when control hardware cannot match field conditions. In Calgary, Extreme Telematics Corp. builds industrial control and control systems for plunger lift, chemical injection, sensing, solar power, and valve control applications. We started in 2001 with hardware and software developers focused on better industrial control products. Our product work has grown into advanced plunger lift controllers, sensors, solar panels, chemical injection controllers, and general valve control products. Artificial lift and wellsite automation are core use cases for our team. We have taken part in industry events tied to artificial lift, PTAC innovation, and well site automation, including Calgary and Houston events listed by ETC. Our Calgary support path covers ETC product help and RMA support for installed equipment. Field automation planning can stay focused on the controller, sensor, power, and valve-control pieces that keep a wellsite system working.

Edmonton, AB, CAN

Hinz - A Rockwell Automation Company provides Control & Control Systems services to oil and gas operators in Edmonton, AZ and across Western Canada.

Red Deer, AB, Canada

A building automation fault can turn into heat loss, refrigeration trouble, or wasted runtime across a facility. Independent Control Services Ltd handles control and control systems, refrigeration, sheet metal, and HVAC service from Red Deer County for commercial and industrial sites in Central Alberta. We have worked in Central Alberta since 1985. Our team is trained through Alberta Apprenticeship programs in air conditioning and refrigeration, electrical, gas fitting, plumbing, and sheet metal, which keeps related trades connected on HVAC and controls jobs. As a Reliable Controls authorized dealer since 2005, we install and maintain building automation and control solutions for commercial, institutional, and industrial facilities. Those systems help facility staff manage HVAC performance, alarms, schedules, and comfort across active buildings. Routine inspections are a core part of our maintenance agreements. Our Red Deer team is available 24 hours a day, 7 days a week for service planning, maintenance response, and control system support.

Mississauga, ON, Canada

Process plants need controls that stay stable when production, maintenance, and safety demands meet. From our Mississauga head office, Lakeside Process Controls works on control & control systems, instrumentation, valves, and meters for oil and gas, power generation, mining, and other process industries. A valve, actuator, regulator, or measurement loop can become a production issue when it drifts or fails under load. We connect product selection with service support so facilities can plan around reliability, maintenance, and process control needs instead of treating each device as a one-off purchase. Our Ontario footprint includes Mississauga, Sarnia, Sudbury, Thunder Bay, Port Elgin, Hamilton, and a Sarnia mechanical services location. That network supports plant work where field response, shop repair, and lifecycle service all affect uptime. Lakeside has operated since 1952. Our team brings automation, construction, field service, and mechanical capability into the same project path when an industrial site needs control system work tied to real plant conditions.

Grande Prairie, AB, Canada

Highly Energized & Empowered Owners World Class Equipment Powered by Passionate People Who We Are Experience industrial innovation at Spartan Controls—the recognized leading provider of industrial automation solutions in Western Canada. For over 60 years, Spartan has provided customers with high performance solutions, industry expertise, lifecycle support, and technical training—delivering value our customers want. Our automation solutions are used in all process industries including oil and gas, oil sands, mining, chemical, pulp and paper, power, pipeline, water/wastewater, food & beverage, building tech, and life science. We are dedicated to creating a sustainable modern world and providing exceptional customer experiences where expertise and collaboration come together.

Calgary, AB, CAN

MicroWatt has the expertise to provide you with an innovative instrumentation solution for any industry challenge. Based in Calgary, AB.

Fort Nelson, BC, Canada

Noagha Trading Company offers Control & Control Systems services from Fort Nelson, BC.

Toronto, ON, Canada

Refrigeration and HVAC parts have to match the system, the trade channel, and the installation method. Ontor Limited is a Toronto-based national distributor for refrigeration products, fittings, meters, tools, and control components supplied to manufacturers and wholesalers across Canada. We focus on product families used by HVAC and refrigeration trades, including component parts, tube fittings, test instruments, and control-related products. That scope fits facility maintenance, mechanical rooms, light industrial buildings, and wholesale supply programs that need steady access to known lines. Some products solve very specific field problems. ClearLOC fittings are built around cut, insert, and visual confirmation steps for tube connections, while testo smart instruments support measurement, documentation, and app-based readings for service work. Our role is distribution and line support, not field installation. We help wholesale and manufacturer accounts source refrigeration, fitting, meter, tool, and control products through our Canadian supply channel.

Nisku, AB, Canada

Based in Nisku, AB, Peco Electrical Ltd specializes in Control & Control Systems.

Calgary, AB, CAN

Rod-pumped wells lose production when design, fluid level, drive control, and rod condition are treated as separate problems. Penta Completions Supply & Service Ltd works from Calgary and Alberta oilfield service points on sucker rods, production optimization, and control & control systems for Canadian oil and gas wells. We specialize in the sale and service of sucker rods and related equipment. Our team works with steel and fibreglass rod systems, rod pumping design, analysis, installation, and fishing when well geometry or horizontal drilling changes make artificial lift harder to manage. Automation work is part of the same production problem. We install and program KWM controllers, commission Pentadrive variable speed drives, integrate communications, and troubleshoot field controls when pumping units need better operating response. Dynamometer and fluid level service gives our artificial lift team the field data needed to adjust rod pumping systems. Training is available for sucker rod pumping design, analysis, optimization, and rod pumping schools. Founded in 1987, we have built our service around rod-pumped production. Our Calgary team can discuss sucker rod equipment, VFD commissioning, dynamometer testing, and production optimization for oilfield wells that need a practical lift plan.

Calgary, AB, Canada

Occupied retail spaces and active sites need construction that keeps access open while the build moves ahead. Prologic Construction Ltd. uses general contracting and design-build delivery for projects across Alberta and British Columbia. Our light industrial facility work includes warehouses, manufacturing plants, and distribution centers. We plan those builds around durability, workflow, and room for future expansion. Since 1999, we have handled public and private sector projects with delivery methods matched to the job. Our teams plan phasing, access, and site conditions before construction begins.

Calgary, AB, Canada

Q Industries International provides process control and automation systems from Calgary. With offices internationally, they deliver procurement, engineering, and control system solutions for oil and gas facilities.

Lachine, QC, Canada

Rousseau Métal Inc. is a Control & Control Systems company based in Lachine, QC.

Balzac, AB, Canada

Commercial masonry needs early planning because stone, brick, panels, logistics, and site access all affect the build. Scorpio C & C Inc works from Balzac on construction projects across Alberta, British Columbia, and Saskatchewan, with masonry planning and installation for commercial, multi-family, and restoration sites. We take part in design, planning, and construction meetings before field installation starts. That gives our masonry team room to review architectural details, material choices, safety needs, and site logistics while the project plan is still being shaped. Our background includes more than 50 years of natural stone solutions and project management. Shop drawings, drafting, panel production, and installation planning are part of how we move masonry work from design intent into buildable field scope. For commercial and restoration construction, our Balzac team focuses on masonry packages that need coordination between design details, material handling, and installation timing across Western Canadian jobsites.

Edmonton, AB, Canada

The experience we gained in managing these mechanical systems, provided us with new opportunities that lead to expand to Building Automation Systems (BAS) with Reliable Controls® and a new direction for our company. We’ve partnered with Reliable Controls® for 35+ years and are among the world’s oldest and top certified dealers. Over the past 45+ years, we have been proud contributors to projects throughout Alberta in the commercial, institutional and industrial sectors providing Building Automation Systems , Preventative Maintenance Programs and HVAC services. RELIABLE. RESPONSIBLE. RESPECTFUL OUR CORE VALUES of being Reliable, Responsible and Respectful are paramount when guiding our clients in attaining their facility management goals.

Edmonton, AB, Canada

Compressed air problems can stop a valve train or slow a compressor skid. From Edmonton, Skeans Pneumatic & Automation Inc builds pneumatic automation and electric automation solutions for Western Canadian industrial sites. We repair valves, actuators, and cylinders, then troubleshoot the control side so equipment moves the way it should. On rotating equipment and compressors, our shop handles on-site repair and off-site overhaul. Teardown and re-assembly keep the unit ready for the next run. Nearly 60 years in pneumatic and automation service gives us a steady approach to planned shutdowns, urgent fixes, and equipment upgrades.

Calgary, AB, CAN

Process plants and pipeline assets depend on control systems that read conditions and act before risk grows. Spartan Controls Automation Centre works from Calgary in industrial automation across Western Canada, with Control & Control Systems for energy and facility applications. Our process control scope connects field devices with the operating picture inside the plant. Instrumentation-Process Control, Flow Measuring Equipment, and Meters help facilities track pressure, flow, and production movement. Valve & Actuation capability is tied to control response. Valves-Control and valve services help process sites move, isolate, and regulate flow as operating conditions change. We also work with fire and gas detection, monitoring, and warning systems where facility safety depends on fast alarms. Educational services, project services, reliability services, and plant optimization give our Calgary automation team a role from planning through long-term site care.

Lacombe, AB, Canada

Industrial equipment builders often need one control package to manage several machine functions. Spyder Controls develops custom electronic control systems in Lacombe for OEMs in industrial, agricultural, marine, and recreation markets. We design around the machine and the user interface it needs. Electrical design, hardware development, circuit-board layout, coding, and prototype work can be combined when a product needs a purpose-built control system. For industrial applications, our controls bring diverse functions into a simpler interface. That helps OEM product teams update equipment, integrate controls, and reduce complexity in the manufacturing process.

Calgary, AB, CAN

Telematic Controls Inc provides Control & Control Systems, Instrumentation, Instrumentation-Process Control services to oil and gas operators in Calgary, AB and across Western Canada.

Calgary, AB, Canada

Together we have been meeting the demanding needs of customers around the globe. If your life or business depends on precise measurement and control, or accurate detection of potentially hazardous workplace atmospheres, you can rely on the precision instrumentation and expertise of PROCON SYSTEMS. The PROCON Group provides its customers with products and services that utilize state-of-the-art technology and are of the highest quality, usefulness and value. PROCON is committed to providing its customers with unsurpassed products and technical support, and continues to seek out products and manufacturer’s that meet the highest standards of performance, quality and value for its’ customers.

Trenton, ON, Canada

Tyco Security Products (TSP) is a unified group of world-leading access control, video, location based security and intrusion brands. With the most trusted brands in security in one portfolio, we offer the most comprehensive range of premium security solutions in the industry; an unbeatable combination from a single source.