Protective Coatings

Spruce Grove, AB, CAN

Alberta's B.E.S.T. Inc provides Protective Coatings, Protective Coatings-Pipe, Secondary Containment, Environmental Containment, Pond & Pit Lining services to oil and gas operators in Spruce Grove, AB and across Western Canada.

Edmonton, AB, CAN

Altek Industrial Supply Ltd provides Supply Stores, Protective Coatings, Corrosion-Control, Valves services to oil and gas operators in Edmonton, AB and across Western Canada.

Oakville, ON, Canada

PowerCOAT Canada offers a wide range of coatings, tools, and surface solutions for commercial and industrial applications.

Taber, AB, CAN

Ar-Tech Coating Ltd provides Protective Coatings, Sandblasting services to oil and gas operators in Taber, AB and across Western Canada.

Dartmouth, NS, Canada

Argo Protective Coatings Inc provides Protective Coatings services in Dartmouth, NS.

St Albert, AB, Canada

Spray in Bedliner Edmonton. Truck Bed Liner. ABOUT Edmonton South: 780-414-0778 Edmonton North: 780-460-3000 Get a Quote Seamless Possibilities About Armaguard Edmonton has been successfully installing superior spray in bed liners since 1991. Our staff have a combined 60 years of experience working in the truck bedliner industry and plan to continue that success for many more. Armaguard is a locally owned and operated company and takes pride in serving Edmonton, St. Albert and surrounding areas.

Edmonton, AB, Canada

Our coatings line serves oil and gas, infrastructure, and industrial sites. We also design spray rigs and fabrication solutions for secondary containment and tank protection. Dealers use our rigs across construction, marine, and agricultural applications.

Leduc, AB, Canada

Rust, scale, and old coating can hide damage on tanks, valves, fittings, and pumps. Big Rig Sandblasting, Painting & Repair uses media blasting in Leduc to clean metal before repair or protective coating work. We use plastic media blasting when the base material needs a lighter touch. Low pressure removes coating from steel, aluminum, pot metal, and cast iron without harsh stripping or heavy abrasion. Industrial parts, gas tanks, and old pumps move through the shop for surface prep and protective coatings. We keep the process practical when a piece needs cleaning, finish work, and a return to service.

Innisfail, AB, CAN

Bilton Welding & Manufacturing Ltd connects design to the job problem behind the request around Innisfail and Western Canada. Manufacturing and repair planning are treated as related parts of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on. Our design scope starts with the condition of the asset. It can move a rough need into a practical build path. The manufacturing side helps customers build equipment around the pressure, fit, and operating need. For customers in Innisfail and Western Canada, that means the first call can start with the asset, access point, schedule, or part that actually drives the job. With repair planning, the important details are fit, access, timing, and handoff. It can find the fault and choose a repair path. The flowback assets side helps customers support flowback and production jobs with purpose-built assets. The customer can explain what is broken, what has to fit, and what has to move before the request turns into a quote or service plan. Welding works best when it is tied to the way the job will be installed or repaired. It can repair or modify metal when fit and access are tight. The insulation side helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time. Design is easier to judge when the market context is clear. The source material points to oil and gas, custom work, maintenance and repair. That gives the capability an operating frame tied to the published evidence. Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect design with manufacturing so the request can move from a rough need into a clearer service discussion around Innisfail and Western Canada. This kind of detail also reduces handoff risk. If the first call is about design, the customer can still see when manufacturing belongs in the same discussion. Innisfail and Western Canada adds the local planning layer, especially when timing, access, or branch response affects the job. The copy groups related work around a real job instead of bouncing between unrelated categories. A good close should leave the customer with a practical next conversation. That starts with design and may extend into manufacturing, repair planning and flowback assets. This scope connects to oil and gas, custom work, maintenance and repair. Listed as established in 1993, the operation also has a continuity signal for repeat local purchasing. Innisfail and Western Canada gives the location context without copying a full address. The next move should be clear: ask about the asset, timing, quote path, or work condition. Rental planning and field response can also change the schedule when the source evidence supports those capabilities. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next. If a branch or yard is involved, that context can change the quote path and the schedule. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect design to the equipment, people, and schedule behind the request. Innisfail and Western Canada also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When manufacturing enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories.

Edmonton, AB, Canada

Boon-Tek Industries Ltd offers Protective Coatings services from Edmonton, AB.

Edmonton, AB, Canada

Established in 2005 with a dream and a truck, BRIMA has since grown into a leading logistics unicorn with operations across the globe. ​ Our comprehensive network of warehouses are strategically positioned across South Africa to ensure seamless delivery and logistics solutions for your business. 360° Care for your Cargo Branches We boast of a network of fully operational branches that are strategically located across bustling city centers and remote areas to ensure seamless service.

Edmonton, AB, CAN

From our Edmonton shop, we apply industrial protective coatings to tanks and pressure piping. We also coat underground pipelines and vessels. Metallizing and urethane round out our field-applied scope. Clean prep and careful application guide us.

Slave Lake, AB, CAN

Bulldog Protective Coatings provides Protective Coatings, Secondary Containment, Liners-Plastic Sheet services to oil and gas operators in Slave Lake, AB and across Western Canada.

Red Deer, AB, Canada

Canwest Protective Coatings is a Protective Coatings company based in Red Deer, AB.

Calgary, AB, CAN

Charter Coating Service (2000) Ltd is most helpful to understand through the job behind parts supply around Calgary, AB. Coating and inspection are treated as related parts of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on. Our parts supply scope starts with the condition of the asset. It can reduce downtime by finding replacement items quickly. The coating side helps customers connect the request to the job condition and next decision. For customers in Calgary, AB, that means the first call can start with the asset, access point, schedule, or part that actually drives the job. With inspection, the important details are fit, access, timing, and handoff. It can check condition before the next stage starts. The fabrication side helps customers turn measurements and wear points into buildable parts. The customer can explain what is broken, what has to fit, and what has to move before the request turns into a quote or service plan. Protective coatings works best when it is tied to the way the job will be installed or repaired. That capability helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time. Parts supply can mean different things in a shop, plant, field, or branch setting. Here, the published details connect it to oil and gas. That gives customers a better way to place the service in a real job. Most industrial calls start with something practical. A part has to be made. A unit has to be checked. A system has to keep running. We frame parts supply with coating so the next step can be tied to the asset, timing, and site condition. In Calgary, AB, that may mean a shop visit, a branch conversation, a field dispatch, or a quote request tied to a real job. The value is not just in naming parts supply. It is in showing how the scope connects to an asset, location, or schedule. Coating gives the customer another route when the first need changes. The services are expanded into decisions and conditions instead of being left as loose terms. The final test is whether the path feels clear. Parts supply, coating, inspection and fabrication should point to a real job discussion, not a loose category block. This scope connects to oil and gas. In Calgary, AB, that means connecting the capability to a branch, shop, field, or project decision the customer can act on. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next. If a branch or yard is involved, that context can change the quote path and the schedule. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect parts supply to the equipment, people, and schedule behind the request. Calgary, AB also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When coating enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories. A stronger request usually names the asset, the location, the timing, and the condition that created the need. Those details help show whether the need is a quick supply question or a deeper repair discussion. If the same job moves toward fabrication or inspection, the customer still has a way to keep the conversation connected. Rental planning and field response can also change the schedule when the source evidence supports those capabilities.

Edmonton, AB, CAN

Whether it's a Commercial, Industrial or Residential project, Cloverdale Paint has all you need - from high performance coatings through equipment - we have the experience and professional advice to help achieve the best finish. Based in Edmonton, AB.

Taber, AB, Canada

powder coating, metal finishing We have been in business for over 20 years. started a hobby and developed into one of California’s preferred powder coating shops. Our facility houses a walk-in oven, spray booths, sandblasting booths, acid dips and the latest spray equipment to ensure the highest of quality product is produced. We pay close attention to detail and our work speaks for itself.

Edmonton, AB, Canada

Sunken concrete can break access around a plant, warehouse, or refinery before a slab looks badly damaged. Concrete Correctors Inc. handles mudjacking in Edmonton, along with pressure grouting, concrete repair, and protective coatings for industrial sites. Osco has handled concrete repair and pressure grouting since 1952. That scope includes mudjacking and polyjacking for settled slabs. Crack injection, shotcrete, and pipe rehabilitation extend the repair plan when the damage goes deeper than surface wear. We match the method to the slab condition, traffic load, and industrial setting.

Edmonton, AB, CAN

Corrpro provides Pipe-Locating, Pipeline-Leak Detection, Pipeline-Repair, Protective Coatings, Protective Coatings-Inspection, Pig Tracking, Corrosion-Control, Corrosion-Monitoring, Cathodic Protection, Inspection-Pipeline services to oil and gas operators in Edmonton, AB and across Western Canada.

Red Deer, AB, Canada

A coating job can fail early if access, containment, and shutdown timing are not planned together. Dalco - A BrandSafway Company in Red Deer applies protective coatings, industrial lining, and abrasive blasting for Western Canadian sites and pipeline-related assets that need controlled surface prep. We also build in insulation and access planning for high-pressure turbines, paper machines, and other process equipment. That keeps the coating scope tied to the asset, not just the surface. With in-house engineering, project management, and a full line of access products behind the job, our team can carry the job through install and maintenance phases. Historical project details and agreed KPIs stay with the scope from start to finish.

Bruderheim, AB, Canada

get in touch About Us Home / About Us Our Journey From Humble Beginnings to Industry Leadership In 2011, Derek Casing Services was founded with a clear mission: to provide reliable, high-quality casing services tailored to the evolving needs of the oil and gas industry. With just one unit and a power tong, we set out to deliver exceptional results for every project we took on. As our reputation for quality and precision grew, so did our opportunities. Over the next six years, DCS experienced remarkable growth , fueled by a combination of strategic decisions, a dedicated team, and a steadfast commitment to client success.

Edmonton, AB, Canada

Construction sites and facility upgrades need coatings that match the surface, schedule, and site conditions. Desco Coatings of Alberta Ltd. handles protective coatings and construction work from our Edmonton base for commercial and industrial projects in Alberta. We have worked from Edmonton since 1956. Our team keeps training on current procedures, materials, equipment, and safety practices used in the construction industry. Protective coatings are used when walls, floors, structures, or finished surfaces need added durability. We plan the coating approach around the building condition and the expected service environment. Our Edmonton office supports coating and construction planning for projects that need experienced applicators, current materials knowledge, and a local team that can discuss the right service area before work begins.

Lloydminster, AB, Canada

Dex's Sandblast & Paint is a Protective Coatings company based in Lloydminster, AB.

Fort McMurray, AB, Canada

Based in Fort McMurray, AB, Douglas Coatings Ltd specializes in Protective Coatings.

Valleyview, AB, Canada

403-601-5900. About Us Quality is standard. embodies a tradition of excellence. With a focus on quality, we’ve been providing top-tier welding and custom fabrication services that cater to a variety of industries, maintaining a commitment to the community and safety. was built on the foundation laid by Jonathan Emsheimer in April 2006, catering to the needs of local farmers and ranchers.

Nisku, AB, Canada

Edvan provides high quality customer designed steel shapes and sizes with unbeatable service and support. We view ourselves as critical member of customers supply chain and look to add value by troubleshooting, optimizing, and delivering on schedule. We succeed when our customers do. For over 40 years Edvan has been providing Custom Metal Bending, Custom Metal Cutting, CNC Plasma Cutting, CNC Water Jet, Metal Punching, Metal Rolling and Welding Services.

Lloydminster, AB, Canada

Corrosion and wear can take a pump part out of service before the rest of the system is ready. Endeavor Machining Solutions Inc. applies and finishes HVOF thermal spray coatings from Lloydminster for facility pump parts and related components. Our machining background lets us finish coated components to the surface condition they need before they go back into service. Plunger pumps are part of the shop focus, so pump-related parts stay in the same repair and finish workflow. We keep investing in equipment and technology, backed by a collective 50 years in protective coatings. That keeps the Lloydminster shop ready for coating jobs that need steady process control and careful surface finish.

Calgary, AB, Canada

Rod wear, abrasion, erosion, and corrosion shorten the life of production tubing and casing. From Calgary, Endurance Technologies Inc supplies ENDURALLOY protective coatings for oil and gas tubulars and components used in producing wells. Our core process is boronized diffusion alloying. The treatment is built for OCTG production tubing, casing, and related components that face wear from pumping, fluid movement, and downhole contact. We have supplied boronized tubing to oil and gas markets since 1993. Stocking points in Western Canada and routine shipments into the United States and international markets support customers planning tubing programs beyond Alberta. Mining, agriculture, and industrial applications can use the same abrasion and corrosion resistance when the part geometry and service conditions fit the ENDURALLOY process. Our Calgary team can review tubing, casing, or component requirements against the coating application and shipping plan.

Whitby, ON, Canada

Corrosion, weight, and slip exposure can shape the material choice before an industrial platform is ever built. From our Whitby, Ontario regional office, Fibergrate works with FRP grating and fabricated composite structures for industrial and commercial sites that need non-metal alternatives. We manufacture fiberglass reinforced plastic products and pair them with design, engineering, project management, and fabrication capability. That helps industrial projects move from product selection into cut, drilled, coped, and assembled FRP components. Our fabrication facility uses shop tools and equipment for machine work on structural members. Construction project managers stay close to fabricated jobs so project details, drawings, and status updates stay tied to one point of contact. Fibergrate grating, construction support, and fabricated FRP structures are available for industrial facilities, commercial projects, and corrosion-prone access areas where composite materials solve a site condition better than steel.

Fort Macleod, AB, Canada

Fool Proof Coatings provides Protective Coatings services in Fort Macleod, AB.

Coaldale, AB, Canada

Frank Derochie Painting Ltd provides Protective Coatings services in Coaldale, AB.

Edmonton, AB, CAN

Wireline and pump orders need shop-built parts that are ready for pressure, measurement, and field service. Frank Henry Equipment Ltd manufactures and distributes oilfield wireline equipment from Edmonton, with custom design for Alberta oil and gas requirements. Our Supply Stores role centers on oilfield parts with defined field use. We handle wireline equipment and instrumentation products for service jobs that need measurement, control, or downhole handling components. Pump orders can include self-priming pumps and Mission 2500 Supreme centrifugal pumps. Mud hoppers, mud guns, drives, and mounting options are matched to the pump package when the application calls for them. Before pumps leave our shop, they are pressure tested and certified for shipment. Frank Henry is also an NOV approved vendor for Mission Pumps. Machining, welding, protective coatings, inspection, and crane-supported handling are available inside the Edmonton shop. Our team can match a wireline part, pump style, or custom field design to the service problem before it ships.

Wainwright, AB, CAN

Internal pipe, tanks, and welded steel need coating systems that stand up to corrosion. Global Fusion Coating Inc. handles protective coatings and abrasive blasting from Wainwright, Alberta, for pipeline, vessel, and industrial applications. We specialize in 100% solids based coating, FBE lining and coating, internal liquid lining, and airless coating application. These coating methods help protect pipe interiors and steel surfaces exposed to service conditions. Post weld heat treat oven capability adds another step for fabrication and repair work tied to coated pipe and welded components. Our blasting and coating process is built around surface preparation, application control, and timely service. Health, safety, and environmental protection are built into our daily coating operations. For Alberta pipeline and industrial coating needs, our Wainwright shop focuses on corrosion-control work from preparation through final application.

Winnipeg, MB, Canada

Guertin Coatings Inc is a O-Rings & Seals and Protective Coatings company based in Winnipeg, MB.

Dartmouth, NS, Canada

Industrial buildings, ships, and refineries need insulation and protective coatings that stand up to heat, moisture, corrosion, and shutdown schedules. From Dartmouth, Guildfords Inc. handles insulation, protective coatings, and specialty construction across Atlantic Canada for industrial, commercial, and marine projects. We bring trade depth to jobs where one scope affects the next. Insulation, sheet metal, passive fire protection, and abatement can be planned together so a facility, vessel, or refinery project moves through field access, containment, and installation with fewer gaps. Our history gives us a long view of industrial service. Guildfords traces its roots through more than 115 years of experience, over 250 team members, and more than 25,000 completed projects. In 2020, Guildfords combined Guild Contracting, Dover Insulation, Scotia Sheet Metal, and MSM Construction into one operating group. We also manufacture and apply insulation products for commercial and industrial settings. That shop and field base helps us plan thermal, envelope, coating, and sheet metal work around site conditions in Atlantic Canada.

Blackfalds, AB, CAN

About – Hall Industrial Contracting Ltd. 📞(403) 885-8885 ✉Contact Us Home About Safety Services Gallery Contact Home About Safety Services Gallery Contact © 2026 Hall Industrial Contracting Ltd. About Since 2002 Hall Blasting & Coating started in 2002. Based in Red Deer, Blackfalds, AB.

Calgary, AB, Canada

Looking for Hard Rock Concrete Supplies? We’re Canada’s go-to source for concrete products, tools, and colours. Trusted by pros. Browse now.

Surrey, BC, Canada

Lyngby Denmark +4545933800 [email protected] hempel.com Media & PR contacts Get news, company updates and find answers to media-related queries here. Show me the FAQs Distributors Connect with our authorized distributors to access our coatings locally. Explore Already a Hempel customer.

Medicine Hat, AB, CAN

Steel projects move faster when fabrication, welding, and pressure piping stay under one roof. In Medicine Hat, Hranco Industries Ltd builds custom fabrication and structural steel for oil and gas work across Western Canada. We also take on facility construction and maintenance when the job has to move from shop to site. Our 32,000-square-foot shop is set up for plate processing, finishing, and heavy lifts up to 10 tons. That space gives us room for structural steel, pressure piping fabrication, and repair work before parts head out. Hranco started in the 1970s and has more than 50 years of welding and fabrication experience behind each job. We keep repairs and new builds moving around shutdown windows, site access, and staged delivery.

Edmonton, AB, Canada

Downhole tools, production tubing, and wellhead components face wear, corrosion, and tight tolerance demands. Impreglon Canada applies oilfield protective coatings in Edmonton for metal parts used in drilling, production, and pressure-related service. Our coating work is built around polymer and electroless nickel systems. These thin-build coatings protect oilfield equipment such as ANSI valves, fittings, and other components where added thickness can affect fit. We are the Canadian trademark owner and exclusive applicator of Impreglon coatings. More than 40 years of coating experience supports our Edmonton shop process for oil and gas parts that need controlled metal protection. NACE Certified QA/QC inspection is part of our coating service. Our team checks coated components against the requirements of oilfield engineers before parts return to the field or facility.