Gauges

Rocky View, AB, CAN

We focus on H2S control for gas, oil, and water handling sites. Our systems cover gas sweetening, crude oil treatment, and clear water treatment with site-specific design. We also work with chemical scavengers and ACT and CLEAR technology for sour crude, condensate, and water. The goal is safer operation across high-pressure gas streams and process facilities.

Edmonton, AB, Canada

Armor Machine & Manufacturing Ltd gives manufacturing a practical operating frame around Edmonton, AB. Machining and welding are treated as related parts of the same decision, not as a copied source list. Confirmed capabilities are tied to operating context a customer can act on. Our manufacturing scope starts with the condition of the asset. It can build equipment around the pressure, fit, and operating need. The machining side helps customers bring worn parts back to usable dimensions. For customers in Edmonton, AB, that means the first call can start with the asset, access point, schedule, or part that actually drives the job. With welding, the important details are fit, access, timing, and handoff. That capability helps customers repair or modify metal when fit and access are tight. The customer can explain what is broken, what has to fit, and what has to move before the request turns into a quote or service plan. Manufacturing is easier to judge when the market context is clear. The source material points to oil and gas. That gives the capability an operating frame tied to the published evidence. The service conversation should move quickly from label to task. With manufacturing and machining, that means naming the asset, the failure point, the supply need, or the site condition early. Around Edmonton, AB, that keeps the request grounded in the place where the job will actually happen. This kind of detail also reduces handoff risk. If the first call is about manufacturing, the customer can still see when machining belongs in the same discussion. Edmonton, AB adds the local planning layer, especially when timing, access, or branch response affects the job. The copy groups related work around a real job instead of bouncing between unrelated categories. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use manufacturing as the anchor, then bring in machining where it helps clarify the next step. That adds depth without copying a loose series from the source page. A good close should leave the customer with a practical next conversation. That starts with manufacturing and may extend into machining and welding. This scope connects to oil and gas. Listed as established in 1982, the operation also has a continuity signal for repeat local purchasing. Edmonton, AB gives the location context without copying a full address. The next move should be clear: ask about the asset, timing, quote path, or work condition. Edmonton, AB also shapes travel, pickup, branch, or dispatch timing. The customer can then ask about the asset and the next practical step. When machining enters the same conversation, the request can stay tied to the original asset instead of drifting into unrelated categories. A stronger request usually names the asset, the location, the timing, and the condition that created the need. Those details help show whether the need is a quick supply question or a deeper repair discussion. If the same job moves toward fabrication or inspection, the customer still has a way to keep the conversation connected. Rental planning and field response can also change the schedule when the source evidence supports those capabilities. The goal is a practical first conversation: what is needed, where it will be used, and what has to happen next. If a branch or yard is involved, that context can change the quote path and the schedule. If a shop or site is involved, access and timing can become just as important as the capability name. That is why the surrounding details stay tied to confirmed capabilities instead of broad claims. The customer should be able to connect the published scope to a real asset before sending a request. That keeps the page focused on practical fit rather than a copied list of every nearby term. That extra context helps connect manufacturing to the equipment, people, and schedule behind the request.

Fort St John, BC, CAN

In Fort St. John, we handle wireline service for oilfield and wellsite jobs. We keep downhole tools, gauges, and pressure-control gear ready for the job. We also run pressure testing and swabbing, with nitrogen carried on the trucks. Safety and quality equipment guide how we show up on site.

Edmonton, AB, CAN

A plant installation or oil and gas project can lose time when instrumentation, calibration, tubing, and electrical hookup are planned as separate jobs. Berja Meter & Controls Ltd delivers instrumentation and calibration services from Edmonton for field and shop needs across Canada and global projects. We work on oil and gas, chemical, pulp and paper, mining, petroleum, and industrial construction sites. Electrical and instrumentation tubing can be planned together for construction projects that need fewer handoffs between trades. Our shop service background includes more than 30 years of instrumentation and calibration work. Field service includes instrument construction, tubing installation, piping, hook-ups, and modularized equipment installation. Flow measuring equipment, pressure recorders, gauges, meters, and meter proving all connect to the same control problem: knowing what the process is doing and keeping the reading dependable. Our Edmonton team can plan field installation or shop calibration around the asset and project stage.

Milverton, ON, Canada

At our Milverton site we stock fittings, valves and gauges for industrial and irrigation systems. We also carry seals and tools for water handling and plant maintenance. We serve food processing plants and manufacturing facilities where steady water flow is needed. Our catalog also helps barns and greenhouses keep water moving.

Calgary, AB, Canada

In Brooks we run fluid hauling and brine fluids for Alberta oil and gas operations. Our fleet supports 24-hour tank truck service, and Alberta Brine Fluids now runs as a wholly owned subsidiary. We also back a full-service mechanical shop and certified vehicle inspection station.

Calgary, AB, Canada

Canada's online source for welding products, tools, machines, supplies, consumables and apparel. We carry your favourite brands at fair prices, including Lincoln, Fronius, Blue Demon, ESAB, Optrel, CK Worldwide, Canaweld, Furick, Pferd, Metabo and much more!

Oakville, ON, Canada

Canada's online source for welding products, tools, machines, supplies, consumables and apparel. We carry your favourite brands at fair prices, including Lincoln, Fronius, Blue Demon, ESAB, Optrel, CK Worldwide, Canaweld, Furick, Pferd, Metabo and much more!

Edmonton, AB, CAN

One missing specialty item can hold up a field repair or well servicing job. Carreau Oilfield Specialties Ltd serves Alberta and Western Canada from Edmonton as an oilfield supply store for dependable specialty equipment. We stock equipment tied to well servicing, drilling, flow control, and field maintenance. Blowout preventers and drill pipe serve drilling and well control needs. Tongs, chains, dies, and gauges belong in the tool and handling side of field service. Flow path parts need the same attention as larger tools. Pumps, fittings, valves, seals, and rubber products help keep pressure and fluid movement under control in demanding field conditions. Authorized distribution is central to our supply model. We carry oilfield lines from Gearench, Double E, Baird, Oteco, Larkin, Lubrikup, Lewis, Cactus Flow Products, TM Industries, Petol, and other manufacturers. Since 1975, our Edmonton team has focused on oilfield specialty supply across Western Canada. We help source the right item for the field condition, brand requirement, and service need.

Edmonton, AB, Canada

Hydraulic systems fail in ways that can stop mobile equipment or an industrial line before the rest of the job is ready. Control Flow Hydraulics Ltd works from Edmonton on hydraulic repair and machining for mobile and industrial systems. Our source-backed path connects cylinder repair, pump service, and custom machine-shop work. Design, testing, and parts support help when pressure performance has to be proven before the hydraulic unit returns to use. For a Control Flow request, the planning details are component type, pressure issue, machining need, test requirement, and whether parts are needed after hours. We keep the repair path tied to the hydraulic system that has to move again.

Saskatoon, SK, Canada

Send A Message View Contact Info Products & Suppliers Projects About News Find Us Call Saskatoon (306) 242-3333 Call Regina (306) 757-5656 Products & Suppliers Commercial HVAC, plumbing, electrical, monitoring, controls & more for all types of commercial buildings from strip malls to Hospitals. Industrial Control valves, fans, pumps, dust collection equipment, filters & more, for a wide range of industrial applications. Industrial Control valves, fans, pumps, dust collection equipment, filters & more, for a wide range of industrial applications. The company was formed in 1991 from 3 smaller companies: Mecon Sales, HK Mechanical and Venture Mechanical.

Red Deer, AB, CAN

Leak points in tubing and valve packages can create pressure, safety, and downtime problems. DK-LOK Canada Ltd. supplies tube fittings and valves for Canadian instrumentation and industrial fluid systems from its Red Deer location and wider Canadian network. We are the Canadian exclusive distributor for DK-LOK tube fittings, valves, and instrumentation accessories. The product range includes fittings, valves, high pressure products, gauges, tools and accessories, filters, quick connectors, hose, and leak detectors. Instrumentation packages often need more than one component family. Our catalogue also covers electrical heat trace, tube bundles, tubing accessories, lubricants, sealants, and large bore ball valves up to 56 inches. The locations served list includes Alberta markets such as Calgary, Fort McMurray, Peace River, and Red Deer, along with other Canadian regions. Our Red Deer supply point supports fitting, valve, and gauge needs for energy, plant, and industrial maintenance work.

Red Deer, AB, CAN

A live pipeline connection should not force a full shutdown when a planned hot tap can keep product moving. EnReach Hot Tap Services completes hot tap, line stop, cold tap, and valve insertion projects from Red Deer for Western Canada pipeline, refinery, drilling, water treatment, wastewater, and chemical manufacturing sites. Our in-service solutions are built for pressure systems that need controlled access. Before HDPE drilling starts, we perform a full hydro test, then complete the tap with the fittings and tooling selected for the line. Since 2005, we have completed more than 4,000 hot taps. That field history sits beside in-house engineering, machining, and manufacturing for split tees, spherical fittings, pipe sleeves, and engineered pressure enclosures. We also manufacture pipe spools and pressure vessels for projects that need more than a field cut-in. EnReach can plan the tap, fitting, pressure test, and line stop sequence as one scope for pipeline or facility service.

Edmonton, AB, CAN

Hot oil units and diesel-fired heaters need the right heat size before they ever reach the field. Fabmaster Ltd fabricates heating units and hot oilers in Edmonton, AB for oilfield service needs that depend on controlled heat and reliable heater parts. We build heater packages in 3.5M, 5.2M, 7.5M, 9.5M, and 11M BTU sizes. A unit may use one heater or more than one heater, depending on the heating duty and equipment design. Service does not stop at new fabrication. We keep parts on hand to build and service these heaters, and we supply replacement coils for matching heater designs from other manufacturers in the 3.5M, 5.2M, and 7.5M BTU ranges. Founded in 1996, our Edmonton shop focuses on heater fabrication and hot oiler service. We also work with related heater, pump, tank, valve, gauge, and hammer union requirements when they are part of the same oilfield heating package.

Edmonton, AB, Canada

Welcome to Fairview - North America’s leader in the manufacture and supply of industrial quality hoses, valves and fittings

Calgary, AB, Canada

Mechanical rooms lose time when the boiler train no longer matches the load. Gossett Sales & Equipment Ltd, working through Mechanical Equipment Sales Co in Calgary, supplies commercial boilers for building systems that need steady service. We also carry heat exchangers and pumps for the circulation side of the room. Controls and gauges keep conditions visible when a facility needs more than one part to stay on line. Venting, expansion compensation, and replacement parts round out the room when maintenance needs a repair path instead of a full replacement. Canadian-made commercial boilers are a core product line, with fast delivery on the equipment a project needs most. Our Calgary team can review the mechanical room scope and match the boiler side, the circulation side, and the controls side to the facility.

Edmonton, AB, CAN

Build an impressive website with the best-rated top-seller WordPress theme Based in Edmonton, Edmonton, AB.

Vancouver, BC, Canada

Field data is only as good as the instrument used to collect it. Hoskin Scientific supplies Environmental Equipment, Data Loggers, Gauges, Instrumentation, Instruments, and Meters from Vancouver for environmental, industrial, and geotechnical monitoring across Canada. We have worked in scientific and environmental instrumentation since 1946. Customers can buy or rent equipment when a project needs water parameter monitoring, vibration monitoring, gas measurement, or locating tools such as rebar and cover meters. Rental instrumentation helps short-term site programs avoid a full equipment purchase. That can suit remediation checks, facility testing, geotechnical monitoring, and industrial investigations where the measurement window is limited. Our Vancouver branch connects Western Canada projects with instrument selection, rental planning, and service for monitoring systems used in field and facility conditions.

Saskatoon, SK, Canada

Hub Automatic Transmission Service provides diesel engine, transmission, and drivetrain repair from Saskatoon, Saskatchewan, serving commercial and oilfield vehicle fleets.

Edmonton, AB, Canada

Hydro Vac's Unlimited Sales in Edmonton sells new and used hydrovac trucks and trailer-mounted units for vacuum excavation and field service. Each unit is completely gone through and tested in-house before sale, so the condition check covers the machine rather than just the sales page. Our work orders can cover water pumps, vac units, hydraulics, tank thickness, gauges, and pressure valves. That keeps the inspection on the systems that make a hydrovac unit work under load. The Edmonton inventory stays focused on hydrovac trucks and trailer-mount units with documented checks already done.

Whitehorse, YT, Canada

Remote Yukon projects need power equipment that can be installed, rented, and repaired close to site. Industrial Electric Services Ltd. works from Whitehorse as an electrical contractor for mining camps, off-grid installations, and industrial sites. Diesel generator rental and generator sales are central to the offering. We also handle diesel pumps and electric submersible pumps. Motor repair, power distribution, and service for industrial electrical equipment sit beside that rental work when a northern site needs one shop for power and pumping needs. Since 1983, our Whitehorse shop has supported Yukon Territory projects with industrial electrical repairs and generator rentals. Our focus stays on practical power, pumping, and electrical installation needs for northern conditions.

Calgary, AB, Canada

Insight Engineering Services Ltd. offers Advanced Vibration Analysis Services in Alberta, Calgary, Edmonton & British Columbia. We specialize in Vibration, Strain, Torsional & Structural problems associated with rotating & reciprocating machinery.

Breton, AB, CAN

Insulation Snakes manufactures an extensive line of reusable insulation products from Breton, Alberta. Their removable insulation blankets protect valves, gauges, tanks, and piping in oilfield production facilities, reducing heat loss and freeze-ups in cold weather operations.

Edmonton, AB, Canada

Oilfield drilling and service work depends on pressure, weight, torque, and depth readings that can be read in real time. Kane Instrumentation Ltd works from Edmonton with instrumentation for mud pressure, weight indicator, torque measurement, chart recorder, and depth measurement applications. We supply oilfield instrumentation tied to rigs, wireline work, pressure testing, and control-air equipment. The product scope includes gauges, meters, valves, pumps, air compressors, and hose test pressure panels where measurement and control have to line up with the job. Safety-related tools are part of the same field package when the application calls for them. Self-retracting lifelines and shear cable cutters sit beside pressure and measurement products because oilfield work often needs instrumentation and site safety equipment planned together. Kane Instrumentation has operated from Edmonton since 2002, with stated oil patch instrumentation knowledge across the team. Our focus stays on the instrument, the pressure range, and the field application it has to serve.

Maidstone, SK, CAN

Keranda Industrial Supply, Supplies, Parts, Tools, Auto Parts, Ag Parts, Industrial Parts, Tool Shops, Keranda Supply, Maidstone, Saskatchewan, Sask., SK., Lashburn, Lloydminster Based in Maidstone, SK.

Edmonton, AB, Canada

For over 50 years Kingsway Instruments has been Canada's most trusted instrumentation provider with the lowest prices and fastest turnarounds - bar none. Shop online for Sales, Service, Rentals and Calibration of Electrical, Dimensional, Humidity, Pressure, Temperature, and Torque products by Fluke, Additel, and more.

Dawson Creek, BC, Canada

Linde Canada Inc Did you know that your internet browser is out of date. Alternatively, you can visit us through a mobile device (smart phone or tablet).

Grande Prairie, AB, CAN

Industrial sites often need tanks that can handle storage, movement, and liquid compatibility without the weight of steel. Marmit Plastics Inc manufactures rotationally moulded plastic tanks in Grande Prairie, Alberta for storage and transportation use. We make plastic water tanks, chemical tanks, and agricultural tanks for customers who need practical containment options. For facility and industrial use, plastic tanks can help with corrosion concerns and day-to-day handling. Our Plastic-Manufacturing work is based on rotational moulding. The process is suited to tanks that need a consistent shape, enclosed storage, and field-ready handling. Marmit Plastics works from catalogue tank options and quoted orders. Our Grande Prairie shop keeps the focus on tank type, liquid use, and the storage or transport job the tank must handle.

Burlington, ON, Canada

Tube, pipe, and bar selection affects pressure service, wear life, corrosion exposure, and fit-up in industrial systems. From Burlington, Marmon Keystone Canada works as a Steel-Distributors source for metals used in manufacturing, construction, automotive, and other industrial applications. Our inventory spans carbon, alloy, stainless steel, and aluminum product families. We match metal selection to the service condition, such as hydraulic systems that need resistance to pressure, wear, and corrosion. Marmon/Keystone traces its history to the oilfields of Pennsylvania, and that supply background still shapes how we approach industrial metal requirements. Tube, pipe, and bar are handled as application-driven products, not generic stock. When a job calls for steel or metal supply in the Burlington market, our team can discuss tube, pipe, or bar requirements against the pressure, corrosion, and fabrication demands of the application.

Calgary, AB, Canada

Max-Quip supplies compressed-gas and alternative-fuel systems from Calgary, with Crossfield space for fabrication and field commissioning. We handle storage, transfer, process, application, and measurement packages for oil and gas, mining, construction, transportation, and remote-community sites. Fuel and heating projects depend on clean transfer and reliable measurement, so the package is planned around product type, flow rate, and site access. Crossfield gives us room for builds and repairs when a project needs more than a shipment of parts. Calgary stays close for design conversations, quotes, and follow-up on operating issues.

Dorval, AB, CAN

McCann Equipment Ltd. / McCann Equipment Ltd. gives customers a clearer starting point for repair planning around Dorval, AB. The nearby scope includes rental planning and pump work. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make. Our repair planning scope starts with the condition of the asset. It can find the fault and choose a repair path. The rental planning side helps customers cover a short-term job need without buying the asset. For customers in Dorval, AB, that means fewer vague calls and a better start for quoting or planning. With pump work, the important details are fit, access, timing, and handoff. That capability helps customers match fluid movement and repair choices to the site. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Repair planning is easier to judge when the market context is clear. The source material points to repair. That gives the capability a real operating frame instead of a generic industrial label. Customers usually arrive with a constraint, not a perfect scope. The part may be worn. The schedule may be tight. The site may need a safer handoff. We connect repair planning with rental planning so the request can move from a rough need into a clearer service discussion around Dorval, AB. This kind of detail also reduces handoff risk. If the first call is about repair planning, the customer can still see when rental planning belongs in the same discussion. Dorval, AB adds the local planning layer, especially when timing, access, or branch response affects the job. That keeps the request from bouncing between unrelated categories. The detail should also help a customer decide what to do next. A person can check whether repair planning belongs in the first call. They can also see when rental planning should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. A good close should leave the customer with a practical next conversation. That starts with repair planning and may extend into rental planning and pump work. This scope connects to repair. Listed as established in 1975, the operation also has a continuity signal for repeat local purchasing. Dorval, AB gives the location context without copying a full address. The next move should be clear: ask about the service, the asset, the timing, or the quote path. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in rental planning where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether repair planning belongs in the first call. They can also see when rental planning should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when repair planning remains close to rental planning. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Dorval, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use repair planning as the anchor, then bring in rental planning where it helps clarify the next step. That keeps the path helpful without adding a loose series.

Brooks, AB, Canada

We handle oil and gas fluid hauling with 24-hour tank trucks from Brooks and Drumheller. Our shop backs the fleet with licensed mechanics and a certified inspection station. We also move brine fluids for wellsite and field routes across Alberta.

Calgary, AB, Canada

Mechanical Equipment Sales Calgary, Alberta Based in Calgary, AB.

Grande Prairie, AB, CAN

Choose from a wide selection of plastic tanks at Marmit Plastics to suit your industrial, agricultural, and residential needs. Based in EDMONTON, Grande Prairie, AB.

Sherwood Park, AB, CAN

Northern Gauge provides Gauges, Calibration-Services services to oil and gas operators in Sherwood Park, AB and across Western Canada.

Nisku, AB, CAN

Local PPE, workwear and safety gear in stock across Alberta. Fast delivery, compliance support and branded uniforms. Based in Nisku, AB.

Edmonton, AB, Canada

Check out the OCDiesel Bargain Bin. Country/region US (USD $) Canada (CAD $) United States (USD $) Country/region Canada (CAD $) United States (USD $) Update country/region Search for parts, tunes, accessories, and more. Read our Import Policy here.

Red Deer, AB, CAN

Downhole pressure and temperature data has to survive the run and return in a form that can be used for reporting. Panther Probe Inc works from Red Deer with oilfield instrumentation, electronic memory gauges, and pressure recorder tools for oil and gas wells. We manufacture battery packs and calibrate electronic memory gauges for downhole service. Our Panther Probe memory and pressure gauges are available for rental and sale when well testing, reservoir work, or pressure recording needs a dedicated tool package. Gauge conversion is part of our service path. We convert selected gauges to Panther Probe technology when a tool needs updated capability instead of full replacement. Our reporting staff prepares AER reporting for oilfield data jobs. Report types include static gradients, build-ups, acid squeezes, pressure transient analysis, and fracturing applications. More than 20 years of data reporting and reservoir well analysis experience sits behind our gauge work. From Red Deer, we plan instrumentation, calibration, rental, and reporting needs around the well test or production data the job requires.

Grande Prairie, AB, CAN

Pathmaker Service Co. LTD. runs power tongs and casing services from Grande Prairie for Alberta and BC oil and gas jobs. Established in 1981, we bring more than 40 years of casing-running experience to wellsite tubular work. We started with power tongs and later added casing-running support. The 500 ton elevators and thread supervision help keep tubular handling controlled when the run has to stay consistent. Our Grande Prairie casing-running experts plan around safe field procedures for Alberta and British Columbia wells. Each run stays centered on the threads, the lift gear, and the sequence that have to work together.

Medicine Hat, AB, Canada

Established in 1980, Peerless Building Products has been servicing Southern Alberta for over 40+ years as one of the premier companies in roofing, siding, and exterior finishings. Over the years, Peerless has expanded their reach into many different industries in both the residential and commercial markets delivering high quality workmanship and durable long lasting products. Starting out as an on-the-go eaves-trough van catering to the local community, Peerless operates today with over 50 employees servicing many different niche markets as a locally ran business. Copyright © 2026 Peerless Building Products - All Rights Reserved.