Wellhead-Equipment

Calgary, AB, CAN

AJ Energy Services provides Oil Country Tubulars, Wellhead-Equipment, Tubing-Used services to oil and gas operators in Calgary, AB and across Western Canada.

St Albert, AB, CAN

Incapsula incident ID: 198000180216804311-188899602358207668. Based in St Albert, AB.

Calgary, AB, CAN

From Calgary, Baker Hughes supports Western Canadian wells with wellheads, connectors, and intervention work from construction through abandonment. We bring the right equipment for jobs where access, connection, and repair have to stay controlled. Pipeline management and gas processing/LNG cover the path from well to plant and terminal. Downstream chemical work supports treatment, while terminal, blending, and transportation services keep product moving through the next handoff. Cordant digital solutions and iCenter maintenance services connect condition data with planning. Distributed vibration monitoring and machine protection give rotating assets a clearer operating picture. Pressure sensors add another layer of visibility, and our centrifugal pumps are built for harsh-duty service.

Calgary, AB, CAN

Since then, our team has grown in numbers, knowledge, and camaraderie. Many of our team members hold expertise covering many of the industries we service today – pulp and paper, gas plants, metallurgy, sealing specialists, petrochemical, and bottom hole pumps are just a few. This expertise has (and continues to) allow us to share our knowledge with each other, continuously growing together and building better connections with our customers and vendors. “Service” is Who We Are We’re proud of the connections we have made and the relationships we have built.

Wellhead-equipment and valve parts need tight machining before they reach an oilfield installation. C R C Wellhead Supply Ltd works from Edmonton, Alberta, with custom machining, design consultation, prototype mockups, testing, and quality assurance for wellhead and valve product needs. We build around the part that has to fit the job. Our engineers and machinists review the idea, turn it into a workable component, and check the finished product before delivery. For valve products and wellhead-equipment, short lead time can matter as much as the part itself. Our Edmonton shop focuses on fast turnaround, on-time delivery, and competitive pricing for machining needs tied to upstream oil and gas equipment. Oilfield clients can talk with us about custom wellhead components, engineered revisions, and machined parts that need a clear review path from concept to finished product.

Calgary, AB, Canada

Cameron Canada Corporation is a Edmonton, AB-based provider of Wellhead-Equipment services.

CRC Wellhead Supply provides wellhead equipment, valves, and related supplies to the Western Canadian oil and gas industry from Edmonton.

Edmonton, AB, CAN

Great North Equipment Inc provides Wellhead-Equipment services to oil and gas operators in Edmonton, MN and across Western Canada.

Red Deer, AB, Canada

High-pressure fracturing jobs need a surface package that matches the completion plan before pressure reaches the wellhead. Isolation Equipment Services Inc works from Red Deer with high-pressure fracturing and wellhead-related systems for completion work. Our source-backed scope centers on the pressure path. Multi-well completion manifolds and satellite dart launchers help organize flow control, while pumper units, ball launcher systems, coil headers, and isolation tools support the sequence at the well. For a Red Deer request, the planning points are pressure class, well count, launcher setup, pumper requirement, and isolation method. We keep the conversation tied to the completion step that has to run safely.

Estevan, SK, CAN

Metra Equipment Inc provides Wellhead-Equipment, Valves services to oil and gas operators in Estevan, SK and across Western Canada.

Edmonton, AB, CAN

Plainsman Mfg. Inc. starts the job conversation with engineering around Edmonton, AB. The nearby scope includes manufacturing, repair planning and shutdown systems. We keep the focus on actual capabilities, operating context, and the next decision a customer is likely to make. Our engineering scope starts with the condition of the asset. It can turn requirements into buildable technical choices. The manufacturing side helps customers build equipment around the pressure, fit, and operating need. For customers in Edmonton, AB, that means fewer vague calls and a better start for quoting or planning. With repair planning, the important details are fit, access, timing, and handoff. It can find the fault and choose a repair path. The shutdown systems side helps customers protect the system when levels or alarms need an automatic response. It keeps the conversation practical. The customer can explain what is broken, what has to fit, and what has to move. Machining works best when it is tied to the way the job will be installed or repaired. It can bring worn parts back to usable dimensions. The pipeline side helps customers connect the request to the job condition and next decision. This works for maintenance, shutdown, fabrication, repair, and supply decisions where a poor handoff costs time. Engineering is easier to judge when the market context is clear. The source material points to oil and gas, custom work and maintenance. That gives the capability a real operating frame instead of a generic industrial label. The service conversation should move quickly from label to task. With engineering and manufacturing, that means naming the asset, the failure point, the supply need, or the site condition early. Around Edmonton, AB, that keeps the request grounded in the place where the job will actually happen. This kind of detail also reduces handoff risk. If the first call is about engineering, the customer can still see when manufacturing belongs in the same discussion. Edmonton, AB adds the local planning layer, especially when timing, access, or branch response affects the job. That keeps the request from bouncing between unrelated categories. A good close should leave the customer with a practical next conversation. That starts with engineering and may extend into manufacturing, repair planning and shutdown systems. This scope connects to oil and gas, custom work and maintenance. Listed as established in 1966, the operation also has a continuity signal for repeat local purchasing. Edmonton, AB gives the location context without copying a full address. The next move should be clear: ask about the service, the asset, the timing, or the quote path. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use engineering as the anchor, then bring in manufacturing where it helps clarify the next step. That keeps the path helpful without adding a loose series. The detail should also help a customer decide what to do next. A person can check whether engineering belongs in the first call. They can also see when manufacturing should be part of the same conversation. That keeps the path practical without adding sectors that do not belong. Planning stays clearer when engineering remains close to manufacturing. The two can affect repair timing and supply choices. They can also shape field access or shop scheduling. Edmonton, AB sets the local context without turning the description into a street-address block. The handoff should stay clear. A request may begin with one need and then move into a related part or repair question. It may also become a rental or inspection question. We use engineering as the anchor, then bring in manufacturing where it helps clarify the next step. That keeps the path helpful without adding a loose series.

Edmonton, AB, CAN

REDCO Equipment Sales Ltd provides Wellhead-Equipment, Valves services to oil and gas operators in Edmonton, AB and across Western Canada.

Calgary, AB, CAN

Select Energy systems providing live well,gas coiled tubing completion services & provider of drilling tools & wellheads to the oil & gas industry in Canada,USA Based in Calgary, Calgary, AB.

Edmonton, AB, CAN

TechnipFMC provides Wellhead-Isolation, Wellhead-Equipment services to oil and gas operators in Edmonton, AB and across Western Canada.

Calgary, AB, CAN

Weatherford Canada Partnership in Calgary connects drilling, evaluation, completion, and production activity through a global energy-services platform. We keep the Canadian office tied to field execution while the wider Weatherford network adds digital tools for planning and performance. On the well-construction side, we handle directional, horizontal, and underbalanced drilling. Cementing gear and drill-collar rental fit the same downhole phase. Wireline and logging help move the well into evaluation. Production testing, flow measurement, completion tools, and packers carry the job toward producing assets. Sand control, plunger lift, pump systems, wellhead hardware, and pipeline testing give mature wells and surface lines another practical path when conditions change.

Weatherford Wellhead Systems provides wellhead equipment, Christmas trees, and surface pressure control solutions for drilling and production operations across Western Canada. From their Edmonton facility, they deliver equipment installation, maintenance, and 24-hour emergency response for operators requiring reliable surface pressure management.

Calgary, AB, CAN

Wood Group Pressure Control provides Wellhead-Repair, Wellhead-Equipment, Valves, Valves-Actuators, Valves-Repair services to oil and gas operators in Calgary, AB and across Western Canada.